ATTENZIONE IL PRODOTTO È NUOVO E CONTROLLATO DAI NOSTRI TECNICI, PRESENTA DIFETTI DA TRASPORTO: LEGGERA AMMACCATURA AL PANNELLO ANTERIORE IMBALLO USURATO (PER MAGGIORI DETTAGLI VISUALIZZA LE FOTO ACCANTO ALL'IMMAGINE PRINCIPALE). Caldaia Baxi Duo-Tec Compact E 28 kW a condensazione low NOx completa di kit scarico fumi Metano o Gpl. Caratteristiche Tecniche Classe di efficienza energetica ErP (risc e ACS): A  Profilo di carico: XL Portata termica nominale sanitario kW 28,9 Portata termica nominale riscaldamento kW 24,7 Efficienza energetica stagionale del riscaldamento d'ambiente ŋs % 93 Emissioni di ossidi di azoto NOx mg/kWh 17 Temperatura minima di funzionamento °C -5 Capacità vaso espansione l 7 Regolazione temperatura acqua circuito riscaldamento °C 25-80 Produzione acqua sanitaria ∆T 25°C (1) l/min 16,1 Portata minima acqua circuito sanitario l/min 2 Capacità vaso espansione l 7 Dimensioni (hxlxp) mm 700x400x299 Grado di protezione IPX5D NB: FUNZIONAMENTO A GPL TRAMITE REGOLAZIONE DEL CENTRO ASSISTENZA AUTORIZZATO Gamma DUO-TEC COMPACT E  Nuovo design: cambia l’estetica, non le prestazioni. Luna Duo-tec E e Duo-tec Compact E: le già note caldaie Baxi si presentano oggi con una nuova estetica, sempre più moderna ed attenta alle nuove tendenze di design, che ne consente l’inserimento in qualsiasi contesto abitativo. Anche il pannello comandi è stato completamente rinnovato ed è dotato di un nuovo display LCD retroilluminato ancora più chiaro e semplice da usare grazie a tasti dedicati ed indipendenti. Le nuove caldaie, ancora più belle e moderne grazie al restyling, mantengono comunque intatte le caratteristiche che da sempre hanno contraddistinto la gamma Duo-tec: Affidabilità. Robustezza, durabilità e affidabilità nelle prestazioni; Efficienza e risparmio. La riduzione dei cicli di accensione/spegnimento si traduce in notevoli benefici in termini di risparmio energetico e minori emissioni; Completezza di gamma. Modelli solo riscaldamento, con produzione istantanea ACS, e anche la versione compatta con possibilità di installazione all’esterno. La gamma si è ulteriormente arricchita con i nuovi modelli dotati DI SERIE del cronotermostato modulante con wi-fi integrato Baxi Mago (duo tec mago) La caldaia ideale per nuove costruzioni e per la sostituzione La gamma di caldaie a gas a condensazione Duo-tec E è stata specificatamente progettata rispettando i requisiti delle Direttive Ecodesign e Labelling, per renderla particolarmente adatta sia in caso di nuove costruzioni sia in sostituzione di un vecchio generatore. La classe energetica, identificata da una lettera, esprime un intervallo di valori di efficienza entro il quale risiede quello espresso dal prodotto in esame. L’etichetta nasce per il consumatore finale, in modo che, attraverso dati veri e comparabili, possa fare scelte consapevoli indirizzandosi su prodotti ad alta efficienza. Funzione preriscaldo scambiatore Le caldaie della gamma Duo-tec E sono dotate della funzione di preriscaldo dello scambiatore che garantisce la produzione immediata di acqua calda sanitaria alla temperatura comfort impostata. Infatti, l’acqua sanitaria passando attraverso le piastre dello scambiatore preriscaldato, viene erogata già alla temperatura desiderata senza tempi di attesa. La funzione può essere facilmente attivata/disattivata da un apposito parametro della caldaia Info caldaia Premendo il tasto dedicato , è possibile visualizzare numerose informazioni in merito al funzionamento della caldaia come ad esempio: pressione acqua impianto riscaldamento (trasduttore di pressione elettronico presente nel gruppo idraulico); temperatura di mandata/ritorno riscaldamento; temperatura esterna (con sonda esterna installata); temperatura acqua calda sanitaria. Efficienza e risparmio maggiore efficienza data da minori accensioni e spegnimenti: con un rapporto di modulazione elevato, la riduzione dei continui cicli di accensione/spegnimento comporta una significativa riduzione dei consumi (dell’8-10%) e una pari riduzione delle emissioni inquinanti; adeguamento della potenza termica prodotta alla potenza dissipata evitando quindi un eccessivo surriscaldamento/raffrescamento dei locali. Gas Adaptive Control È un innovativo sistema che, grazie ad una nuova elettronica di controllo e ad una nuova valvola a gas elettronica, garantisce un controllo automatico della combustione per mantenere costantemente i valori di massima efficienza. Vantaggi: non ci sono interventi manuali - ridotte misurazioni, tarature o cambio ugelli con questo sistema, la caldaia si auto adatta alla qualità del gas e alla lunghezza dei tubi di scarico fumi mantenendo costante il rendimento la caldaia inoltre si autoregola costantemente per mantenere i valori di massima efficienza favorendo una riduzione dei consumi di gas e generando meno inquinamento grazie al continuo controllo delle emissioni Installazione all’esterno Le caldaie Duo-tec Compact E possono essere installate all’esterno in luoghi parzialmente protetti grazie al nuovo kit di copertura superiore e al kit di chiusura inferiore (disponibili come accessori). La gamma Duo-tec Compact E, infatti, è dotata DI SERIE di un sistema antigelo elettronico che garantisce il funzionamento fino alla temperatura di -5 °C: la protezione IPX5D, inoltre, tutela le parti elettriche da getti d’acqua che possono provenire da tutte le direzioni. Nuovo design moderno ed elegante per tutta la gamma Ampio campo di modulazione 1:7 maggiore efficienza e silenziosità GAC (gas adaptive control): controllo automatico della combustione Pannello comandi digitale con ampio display LCD retroilluminato Nuovo kit di copertura: possibilità di installazione all’esterno in luoghi parzialmente protetti (accessorio a richiesta) Allacciamento tubo di scarico Ø50 mm rigido e flessibile: soluzione per risanamento canne fumarie - per il mod. 24 kW lunghezza totale 40 metri (aspirazione+scarico) Dimensioni compatte: 700x400x299 mm Sistema idraulico Valvola deviatrice a tre vie elettrica Bruciatore a premiscelazione in acciaio inox Scambiatore acqua/fumi in acciaio inox Scambiatore sanitario maggiorato in acciaio inox che permette alla caldaia di condensare anche in funzionamento sanitario Ventilatore modulante a variazione elettronica di velocità By-pass automatico Pompa di circolazione ad alta efficienza a modulazione totale Sistema antibloccaggio pompa e valvola a tre vie che interviene ogni 24 ore Valvola di sicurezza circuito riscaldamento a 3 bar Sistema di termoregolazione Regolazione climatica di serie (con sonda esterna disponibile come optional) Predisposizione per il collegamento ad un impianto a zone Sistema di controllo Termostato di sicurezza contro le sovratemperature dello scambiatore acqua/fumi Pressostato idraulico che blocca il gas in caso di mancanza d’acqua Sonda NTC di sicurezza contro le sovratemperature dei fumi Controllo temperature mediante sonde NTC Dispositivo antigelo totale Termometro elettronico Manometro circuito riscaldamento Garanzia Prodotto :  Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.

Read more less

BAXI LUNA DUO-TEC IN+ 28 GA LPG CONDENSING BOILER COMPLETE WITH FUME EXHAUST KIT - NEW ErP Technical features ErP energy efficiency class (heating and DHW): A Load profile: XL Nominal heat input 28.9 kW Nominal thermal power 28 kW Energy efficiency (92/42/EEC) **** Nominal efficiency 80/60°C % 97.6 Return at 30% % 108.8 Heating circuit water temperature control °C 25-80 Sanitary water temperature adjustment °C 35-60 Sanitary water production ∆T 25°C l/min 16.1 Minimum domestic water flow rate: 2 l/min Minimum operating temperature: -15°C Expansion/pre-charge vessel capacity l/bar: 8/0.8 NOx class (EN 483): 5 Electric power W 99 Degree of protection IPX5D Dimensions (hxlxp) - with case: mm 1170 x 600 x 245 Dimensions (hxwxd) - boiler 770 x 470 x 238 mm; 32.5kg Power supply: LPG Standard Remote digital control panel with LCD display Installation kit (gas cock / gas inlet / telescopic fittings) General characteristics Luna Duo-Tec IN+ The efficiency of compact built-in comfort Baxi has always offered the ideal system solution for any type of home: for this reason the Duo-tec+ range is expanding with built-in models and for outdoor installation. Luna Duo-tec IN+ is the built-in condensing boiler, specifically designed to make it suitable for replacing an old built-in generator but also in new installations. The extremely compact dimensions of the boiler facilitate its installation in small/medium-sized apartments, and in general in all housing units where efficient space management is an important objective (for example in technical rooms or in the presence of ) Characteristics: Wide modulation range up to 1:7 greater efficiency and silence GAC (gas adaptive control): automatic combustion control Automatic plant loading system Minimum operating temperature: -15°C Remote digital control panel with LCD display Arrangement for combination with the Baxi integrated solar system High efficiency circulation pump with total modulation Ultra-compact dimensions: 770x470x238 mm (boiler) STANDARD installation kit (gas cock / gas inlet / telescopic fittings) Antifreeze function and IPX5D degree of protection Digital control panel The Duo-tec+ range of boilers is equipped with a digital control panel with backlit LCD display, easy to use thanks to dedicated and independent keys to adjust the temperature of the domestic hot water and the heating. The display allows you to view all the information and set the operating parameters in a clear and immediate way. Gas Adaptive Control The innovative GAC (Gas Adaptive Control) automatic combustion control system guarantees a wide modulation range up to 1:10: high efficiency and energy savings are ensured as the boiler is able to adjust the thermal power produced to the actual power dissipated from the building avoiding excessive heating/cooling of the building. Antifreeze function The boilers have been designed to allow the boiler to operate down to -15°C. Furthermore, the antifreeze function provides for the automatic ignition of the burner, avoiding freezing phenomena. Wide modulation range 1:7 greater efficiency given by less switching on and off: with a high modulation ratio, the reduction of continuous switching on/off cycles leads to a significant reduction in consumption (by 8-10%) and an equal reduction in polluting emissions adjustment of the thermal power produced to the power dissipated thus avoiding excessive overheating/cooling of the premises Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

IN CASE OF NON-AVAILABILITY OF THE PRODUCT, THE NEW MODEL baxi evolution prime 30 WILL BE SUPPLIED Overview BAXI PRIME 24 CONDENSING BOILER COMPLETE WITH FUME KIT + LPG or LPG HYDRAULIC KIT - NEW MODEL ErP 2016 Technical specifications ErP energy efficiency class (heating and DHW): A - A Load profile: XL heating and instant DHW production Heating/sanitary nominal heat inputkW 28.9/24.7 Sanitary nominal thermal powerÿkW 28ÿ Energy efficiency(92/42/CEE)ÿ**** Efficiency 100% Pn (80-60øC): 97.8% Efficiency 100% Pn (50-30øC): 105.0% Minimum operating temperatureøC -5 Expansion/pre-charge capacity l/bar 8/0.5 Sanitary water temperature adjustmentøC 35-60 Sanitary water production T 25øC l/min 16.1 Minimum domestic hot water flow rate I/min 2ÿ Degrees of protection: IPX5Dÿ NOx class (EN 483) 5 Electric power W 155 Dimensions (hxwxd): 700x395x279ÿmmÿ; 44 kgs Power supply:ÿLPG LPG Main features First ÿThe ideal condensation for replacement in old systemsÿ with cast iron / lamellar steel radiators The new Prime condensing range is divided into two models, 24 and 28 kW for heating and instant domestic hot water production. Prime was designed in compliance with the requirements of the Ecodesign and Labeling Directives. The labeling directive (2010/30/EU) requires the labeling of products according to a decreasing energy scale that goes from A++ to G starting from 09/26/2015 and from A+++ to D from 09/26/2019. The label was created to allow the final consumer, by providing real and comparable data, to make informed choices by targeting high-efficiency products. Characteristics: Easy to use thanks to the control panel with knobs and backlit LCD displayÿ Easy installation thanks to the ultra-compact dimensions (700x395x285mm - including knobs) and weight-free (26 kg)ÿ Campdi modulation 1:5 greater efficiency and silence High efficiency circulation pumpÿ Arrangement for combination with the Baxiÿ integrated solar system Double 80 exhausts as standardÿ Connection of 50 mm rigid flexible exhaust pipes: solutions for flue refurbishmentÿ Connect pressurized collective fluesÿ Boilers working with methane that can be transformed into LPG and propane by means of a specific regulation (conversion kit not necessary) The advantages of the new Prime Easy to install The ultra-compact dimensions 700x395x279 mm and the weight of just 26 kg reduce the installation time. The new Prime has the same distance between centers of the hydraulic connections of the conventional BAXI boilers to be replaced. The frontal access to the electrical connection also speeds up connection times. The fixing bracket supplied as standard and the visible hooks facilitate wall mounting Clapet (non-return valve) Included in the downstream duct of the gas group fan ÿConnection of pressurized collective flues Thanks to the integrated non-return valve (clapet), Prime is designed for connection to pressurized collective flues. ÿFlexible smoke ducts 50 mm Possibility of rehabilitating the flue pipes with a 50 mm discharge hose (up to 40 m of discharge). Less energy consumption Thanks to the condensing technology, the high efficiency pump and the series of modulating room thermostats available as an accessory. The new regulation 7129-3:2015 prescribes the possibility of creating collective flues in positive pressure only for type C condensing appliances. It is possible to connect to a collective flue in positive pressure only appliances declared suitable by the manufacturer for this application and equipped with non-return device (clapet), designed to prevent the combustion products from flowing through devices connected and temporarily switched off; the smoke non-return valve is an integral part of the appliance Flexibility in replacement Easy replacement of old standard boilers, thanks to the central flue and separable flue supplied as standard The 60/100 axial drain is available as an accessory and can be combined with a 90ø diameter 60/100 curved tube extension (adjustable by 360ø). To facilitate replacement in installations where spaces are limited (flue gas outlet at the rear of the boiler), the new accessory is available with a lowered coaxial bend 90ø. The lower closure kit allows the boiler to adapt to any environment, reducing the visual impact by fitting into all replacement installation contexts. To facilitate replacement in installations where space is limited (flue gas outlets at the rear of the boiler), the new 90ø coaxial lowered bend accessory is available New combustion group The new Prime combines the performance of the stainless steel exchanger with the advantages of a new generation burner integrated with an innovative cold closing door. The new cylinder burner ensures greater thermal-acoustic comfort, and reduced NOx and CO emissions thanks to the greater flame stability. The new cold door reduces losses by 75% with a surface temperature below 20°C, guaranteeing significant savings in stand-by and during operation, speeding up maintenance, as there is no need to wait for it to cool down. All ready for Energy Labeling What is it about From 26 September 2015 the directives of the European Commission concerning eco-design and energy labeling will apply. These two directives aim to achieve savings in one of the most polluting and most energy intensive sectors: construction For placing on the European market, the directive on ÿeco-designÿ(ErP notcome®ÿEnergy Related Productsÿ¯) imposes a minimum energy efficiency for heating devices and hot water production in domestic premises. The directive applies to: generators with a capacity of less than 400 kW water heaters with a capacity of less than 400 kW, kettles with a capacity of less than 2000 litres As in the household appliances sector, the energy labelingÿof products, with a capacity of less than 70 kW, will give consumers simple, recognizable information which allows them to make comparisonsÿon the performance and energy consumption of the product they wish to purchase. The energy label will be included in all boilers, water heaters and storage tanks placed on the market from 26 September 2015. It's about me tooÿ YES, it affects everyone: professionals and end users The information indicated on the energy labelÿwill allow professionals to recommend the right productÿÿindividuals to benefit from the information available. The user will be able to easily compare the performance of the products. From 26 September 2015, the label will be present on the following products: boilers, electric water heaters, thermodynamic water heaters, solar water heaters, storage tanks, heat pumps, solar systems and control systems. Supplier's responsibility The company that supplies the product on the market is required to equip its system devices with the following documentation: product energy label;ÿ product data sheet;ÿ system energy label in addition to that of the product, both if it sells a system that includes the product in question, and if this, in the future, can be sold combined with other additional devices;ÿ technical data sheet of the system with the parts relating to the products and the system already completed. Responsibilities of Resellersÿ First of all, it should be clarified that the reseller can be anyone who sells, rents, offers for rent/sale and exhibits a device/system to the public. Therefore, even professionals such as plumbers, installers, designers can fall into this category. All bound to ensure that: all appliances and/systems having their respective labels and making sure they are clearly visible;ÿ all appliances and/systems must always be accompanied by the obligatory technical data sheets;ÿ every type of advertising material, technical promotional material which shows energy data and price indications, contains an indication of the energy efficiency class. The new ErP regulations ENERGY LABELLING: Appliances for space heating and the production of hot water will have to be equipped with the new energy label which will report the energy class and the main performance data. The energy class must also be mentioned in the technical, commercial and advertising documentation of the appliances. ECODESIGN (ErP): The new ErP regulations impose the minimum energy efficiency that space heating and hot water production appliances must achieve in order to obtain the CE mark and be marketed in Europe. These new limits will exclude obsolete technologies from the market, significantly raising the level of energy efficiency of products. PRODUCT LABEL There are different labels depending on the type of appliance. Those with efficiency classes A, A+ and A++ certify products with the highest performance. Furthermore, two different classifications are foreseen for domestic heating and for hot water production services, so much so that mixed products must show both classifications. In addition to the energy class, the labels contain other information, so that the end customer can make his choice in the most aware way possible. SYSTEM LABEL In addition to the product label, the system label is also providedÿin cases where a series of appliances combined with each other is offered. This label must also be included in the technical and commercial documentation of the system. Those proposing such systems will have to calculate the performance using a predefined calculation algorithm and display the label so as to inform the end user in the best possible way. Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features ErP energy efficiency class (heating and DHW): A  Load profile: XL Nominal heat input 28.9 kW Nominal thermal power 28 kW Energy efficiency (92/42/EEC) **** Nominal efficiency 80/60°C % 97.6 Return at 30% % 108.8 Heating circuit water temperature control °C 25-80 Sanitary water temperature adjustment °C 35-60 Sanitary water production ∆T 25°C l/min 16.1 Minimum domestic water flow rate: 2 l/min Minimum operating temperature: -15°C Expansion/pre-charge vessel capacity l/bar: 8/0.8 NOx class (EN 483): 5 Electric power W 99 Degree of protection IPX5D Dimensions (hxlxp) - with case: mm 1170 x 600 x 245 Dimensions (hxwxd) - boiler 770 x 470 x 238 mm; 32.5kg Power supply: METHANE Luna Duo-Tec IN+ The efficiency of compact built-in comfort Baxi has always offered the ideal system solution for any type of home: for this reason the Duo-tec+ range is expanding with built-in models and for outdoor installation. Luna Duo-tec IN+ is the built-in condensing boiler, specifically designed to make it suitable for replacing an old built-in generator but also in new installations. The extremely compact dimensions of the boiler facilitate its installation in small/medium-sized apartments, and in general in all housing units where efficient space management is an important objective (for example in technical rooms or in the presence of ) Recessed installation outdoors Luna Duo-tec IN+ is the built-in condensing boiler, specifically designed to make it suitable for replacing an old built-in generator but also in new installations. The extremely compact dimensions of the boiler facilitate its installation in small/medium-sized apartments, and in general in all housing units where efficient space management is an important objective (for example in technical rooms or in the presence of ). The packing contains the bracket and installation fittings for inserting the boiler into the containment case Characteristics: Wide modulation range up to 1:7 greater efficiency and silence GAC (gas adaptive control): automatic combustion control Automatic plant loading system Minimum operating temperature: -15°C Remote digital control panel with LCD display Arrangement for combination with the Baxi integrated solar system High efficiency circulation pump with total modulation Ultra-compact dimensions: 770x470x238 mm (boiler) STANDARD installation kit (gas cock / gas inlet / telescopic fittings) Antifreeze function and IPX5D degree of protection Digital control panel The Duo-tec+ range of boilers is equipped with a digital control panel with backlit LCD display, easy to use thanks to dedicated and independent keys to adjust the temperature of the domestic hot water and the heating. The display allows you to view all the information and set the operating parameters in a clear and immediate way. Gas Adaptive Control The innovative GAC ( Gas Adaptive Control ) automatic combustion control system guarantees a wide modulation range up to 1:10: high efficiency and energy savings are ensured as the boiler is able to adjust the thermal power produced to the actual power dissipated from the building avoiding excessive heating/cooling of the building. Antifreeze function The boilers have been designed to allow the boiler to operate down to -15°C. Furthermore, the antifreeze function provides for the automatic ignition of the burner, avoiding freezing phenomena. Wide modulation range 1:7 greater efficiency given by less switching on and off: with a high modulation ratio, the reduction of continuous switching on/off cycles leads to a significant reduction in consumption (by 8-10%) and an equal reduction in polluting emissions adjustment of the thermal power produced to the power dissipated thus avoiding excessive overheating/cooling of the premises Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

IN CASE OF NON-AVAILABILITY OF THE PRODUCT, THE NEW MODEL baxi evolution prime 30 WILL BE SUPPLIED Technical specifications ErP energy efficiency class (heating and DHW): A - A Load profile: XL heating and instant DHW production Heating/sanitary nominal heat inputkW 28.9/24.7 Sanitary nominal thermal powerÿkW 28ÿ Energy efficiency(92/42/CEE)ÿ**** Efficiency 100% Pn (80-60øC): 97.8% Efficiency 100% Pn (50-30øC): 105.0% Minimum operating temperatureøC -5 Expansion/pre-charge capacity l/bar 8/0.5 Sanitary water temperature adjustmentøC 35-60 Sanitary water production T 25øC l/min 16.1 Minimum domestic hot water flow rate I/min 2ÿ Degrees of protection: IPX5Dÿ NOx class (EN 483) 5 Electric power W 155 Dimensions (hxwxd): 700x395x279ÿmmÿ; 44 kgs Power supply: METHANE LPG Main features First ÿThe ideal condensation for replacement in old systemsÿ with cast iron / lamellar steel radiators The new Prime condensing range is divided into two models, 24 and 28 kW for heating and instant domestic hot water production. Prime was designed in compliance with the requirements of the Ecodesign and Labeling Directives. The labeling directive (2010/30/EU) requires the labeling of products according to a decreasing energy scale that goes from A++ to G starting from 09/26/2015 and from A+++ to D from 09/26/2019. The label was created to allow the final consumer, by providing real and comparable data, to make informed choices by targeting high-efficiency products. Characteristics: Easy to use thanks to the control panel with knobs and backlit LCD displayÿ Easy installation thanks to the ultra-compact dimensions (700x395x285mm - including knobs) and weight-free (26 kg)ÿ Campdi modulation 1:5 greater efficiency and silence High efficiency circulation pumpÿ Arrangement for combination with the Baxiÿ integrated solar system Double 80 exhausts as standardÿ Connection of 50 mm rigid flexible exhaust pipes: solutions for flue refurbishmentÿ Connect pressurized collective fluesÿ Boilers working with methane that can be transformed into LPG and propane by means of a specific regulation (conversion kit not necessary) The advantages of the new Prime Easy to install The ultra-compact dimensions 700x395x279 mm and the weight of just 26 kg reduce the installation time. The new Prime has the same distance between centers of the hydraulic connections of the conventional BAXI boilers to be replaced. The frontal access to the electrical connection also speeds up connection times. The fixing bracket supplied as standard and the visible hooks facilitate wall mounting Clapet (non-return valve) Included in the downstream duct of the gas group fan ÿConnection of pressurized collective flues Thanks to the integrated non-return valve (clapet), Prime is designed for connection to pressurized collective flues. ÿFlexible smoke ducts 50 mm Possibility of rehabilitating the flue pipes with a 50 mm discharge hose (up to 40m of discharge). Less energy consumption Thanks to the condensing technology, the high efficiency pump and the series of modulating room thermostats available as an accessory. The new regulation 7129-3:2015 prescribes the possibility of creating collective flues in positive pressure only for type C condensing appliances. It is possible to connect to a collective flue in positive pressure only appliances declared suitable by the manufacturer for this application and equipped with non-return device (clapet), designed to prevent the combustion products from flowing through devices connected and temporarily switched off; the smoke non-return valve is an integral part of the appliance Flexibility in replacement Easy replacement of old standard boilers, thanks to the central flue and separable flue supplied as standard The 60/100 axial exhaust is available as an accessory and can be combined with a 90ø diameter 60/100 curved tube extension (adjustable by 360ø). To facilitate replacement in installations where spaces are limited (flue gas outlet at the rear of the boiler), the new accessory is available with a lowered coaxial bend 90ø. The lower closure kit allows the boiler to adapt to any environment, reducing the visual impact by fitting into all replacement installation contexts. To facilitate replacement in installations where space is limited (flue gas outlets at the rear of the boiler), the new 90ø coaxial lowered bend accessory is available New combustion group The new Prime combines the performance of the stainless steel exchanger with the advantages of a new generation burner integrated with an innovative cold closing door. The new cylinder burner ensures greater thermal-acoustic comfort, and reduced NOx and CO emissions thanks to the greater flame stability. The new cold door reduces losses by 75% with a surface temperature below 20°C, guaranteeing significant savings in stand-by and during operation, speeding up maintenance, as there is no need to wait for it to cool down. All ready for Energy Labeling What is it about From 26 September 2015 the directives of the European Commission concerning eco-design and energy labeling will apply. These two directives aim to achieve savings in one of the most polluting and most energy intensive sectors: construction For placing on the European market, the directive on ÿeco-designÿ(ErP notcome®ÿEnergy Related Productsÿ¯) imposes a minimum energy efficiency for heating devices and hot water production in domestic premises. The directive applies to: generators with a capacity of less than 400 kW water heaters with a capacity of less than 400 kW, kettles with a capacity of less than 2000 litres As in the household appliances sector, the energy labelingÿof products, with a capacity of less than 70 kW, will give consumers simple, recognizable information which allows them to make comparisonsÿon the performance and energy consumption of the product they wish to purchase. The energy label will be included in all boilers, water heaters and storage tanks placed on the market from 26 September 2015. It's about me tooÿ YES, it affects everyone: professionals and end users The information indicated on the energy labelÿwill allow professionals to recommend the right productÿÿindividuals to benefit from the information available. The user will be able to easily compare the performance of the products. From 26 September 2015, the label will be present on the following products: boilers, electric water heaters, thermodynamic water heaters, solar water heaters, storage tanks, heat pumps, solar systems and control systems. Supplier's responsibility The company that supplies the product on the market is required to equip its system devices with the following documentation: product energy label;ÿ product data sheet;ÿ system energy label in addition to that of the product, both if it sells a system that includes the product in question, and if this, in the future, can be sold combined with other additional devices;ÿ technical data sheet of the system with the parts relating to the products and the system already completed. Responsibilities of Resellersÿ First of all, it should be clarified that the reseller can be anyone who sells, rents, offers for rent/sale and exhibits a device/system to the public. Therefore, even professionals such as plumbers, installers, designers can fall into this category. All bound to ensure that: all appliances and/systems having their respective labels and making sure they are clearly visible;ÿ all appliances and/systems must always be accompanied by the obligatory technical data sheets;ÿ every type of advertising material, technical promotional material which shows energy data and price indications, contains an indication of the energy efficiency class. The new ErP regulations ENERGY LABELLING: Appliances for space heating and the production of hot water will have to be equipped with the new energy label which will report the energy class and the main performance data. The energy class must also be mentioned in the technical, commercial and advertising documentation of the appliances. ECODESIGN (ErP): The new ErP regulations impose the minimum energy efficiency that space heating and hot water production appliances must achieve in order to obtain the CE mark and be marketed in Europe. These new limits will exclude obsolete technologies from the market, significantly raising the level of energy efficiency of products. PRODUCT LABEL There are different labels depending on the type of appliance. Those with efficiency classes A, A+ and A++ certify products with the highest performance. Furthermore, two different classifications are foreseen for domestic heating and for hot water production services, so much so that mixed products must show both classifications. In addition to the energy class, the labels contain other information, so that the end customer can make his choice in the most aware way possible. SYSTEM LABEL In addition to the product label, the system label is also providedÿin cases where a series of appliances combined with each other is offered. This label must also be included in the technical and commercial documentation of the system. Those proposing such systems will have to calculate the performance using a predefined calculation algorithm and display the label so as to inform the end user in the best possible way. Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

BAXI LUNA DUO-TEC+ 28 GA LPG CONDENSING GAS BOILER COMPLETE WITH FUME EXHAUST KIT - NEW ErP ErP energy efficiency class (heating and DHW): A Load profile: XL DHW nominal heat input kW 28.9 Heating nominal heat input kW 24.7 Sanitary nominal thermal power kW 28 Energy efficiency (92/42/EEC) **** Efficiency at 100% Pn (80-60°C): 97.6% Efficiency at 100% Pn (50-30°C): 105.8% Expansion/pre-charge vessel capacity l/bar 8/0.8 Sanitary water temperature adjustment °C 35-60 Sanitary water production ∆T 25°C l/min 16.1 Degree of protection: IPX5D NOx class (EN 483) 5 Dimensions (h x w x d): 763 x 450 x 345 mm ; 38.5 kgs Power supply: LPG Luna Duo-Tec+ Wall mounted gas condensing boilers ideal for both new build and replacement The new Duo-tec+ range of gas-fired condensing boilers has been specifically designed in compliance with the requirements of the Ecodesign and Labeling Directives, to make it particularly suitable both for new buildings and for replacing an old generator. In fact, in addition to the already known advantages of condensing technology such as high efficiency, energy saving and reduced polluting emissions, the new Duo-tec+ condensing boilers are characterized by: Complete range of models : heating only, with instantaneous DHW production, with integrated micro-storage tank, with integrated 40-litre storage tank. The range also includes the compact version (Compact+), the first Baxi condensing boiler in just 70 cm in height and 30 cm in depth. Digital control panel with backlit LCD display Wide modulation range 1:7 the reduction of on/off cycles translates into significant benefits in terms of energy savings and lower emissions Digital control panel The Duo-tec+ range of boilers is equipped with a digital control panel with backlit LCD display, easy to use thanks to dedicated and independent keys to adjust the temperature of the domestic hot water and the heating. The display allows you to view all the information and set the operating parameters in a clear and immediate way. Wide modulation range 1:7 greater efficiency given by fewer starts and stops: with a high modulation ratio, the reduction of the continuous on/off cycles leads to a significant reduction in consumption (by 8-10%) and an equal reduction in polluting emissions adjustment of the thermal power produced to the power dissipated thus avoiding excessive overheating/cooling of the premises Gas Adaptive Control The innovative GAC ( Gas Adaptive Control ) automatic combustion control system guarantees a wide modulation range up to 1:10: high efficiency and energy savings are ensured as the boiler is able to adjust the thermal power produced to the actual power dissipated from the building avoiding excessive heating/cooling of the building. Total modulation pump The circulation pump can operate at maximum speed, minimum speed or in "automatic" mode: in the latter case, the speed (min./max) will be selected so that the delivery/return ∆T in heating remains constant at 20 °C thus ensuring a significant reduction in pump consumption and, given the lower mechanical stresses (compared to a pump that always runs at maximum speed), also in maintenance costs Characteristics: Wide modulation range up to 1:7 greater efficiency and silence GAC (gas adaptive control): automatic combustion control High efficiency circulation pump with total modulation Digital control panel with large backlit LCD display Arrangement for combination with the Baxi integrated solar system Ø50 mm exhaust pipe: solution for restoring flues - mod. 24 kW Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

BAXI LUNA DUO-TEC+ 28 GA METHANE CONDENSING GAS BOILER COMPLETE WITH FUME EXHAUST KIT - NEW ErP Load profile: XL DHW nominal heat input kW 28.9 Heating nominal heat input kW 24.7 Sanitary nominal thermal power kW 28 Energy efficiency (92/42/EEC) **** Efficiency at 100% Pn (80-60°C): 97.6% Efficiency at 100% Pn (50-30°C): 105.8% Expansion/pre-charge vessel capacity l/bar 8/0.8 Sanitary water temperature adjustment °C 35-60 Sanitary water production ∆T 25°C l/min 16.1 Degree of protection: IPX5D NOx class (EN 483) 5 Dimensions (h x w x d): 763 x 450 x 345 mm ; 38.5 kgs Power supply: METHANE Luna Duo-Tec+ Wall mounted gas condensing boilers ideal for both new build and replacement The new Duo-tec+ range of gas-fired condensing boilers has been specifically designed in compliance with the requirements of the Ecodesign and Labeling Directives, to make it particularly suitable both for new buildings and for replacing an old generator. In fact, in addition to the already known advantages of condensing technology such as high efficiency, energy saving and reduced polluting emissions, the new Duo-tec+ condensing boilers are characterized by: Complete range of models : heating only, with instantaneous DHW production, with integrated micro-storage tank, with integrated 40-litre storage tank. The range also includes the compact version (Compact+), the first Baxi condensing boiler in just 70 cm in height and 30 cm in depth. Digital control panel with backlit LCD display Wide modulation range 1:7 the reduction of on/off cycles translates into significant benefits in terms of energy savings and lower emissions Digital control panel The Duo-tec+ range of boilers is equipped with a digital control panel with backlit LCD display, easy to use thanks to dedicated and independent keys to adjust the temperature of the domestic hot water and the heating. The display allows you to view all the information and set the operating parameters in a clear and immediate way. Wide modulation range 1:7 greater efficiency given by fewer starts and stops: with a high modulation ratio, the reduction of the continuous on/off cycles leads to a significant reduction in consumption (by 8-10%) and an equal reduction in polluting emissions adjustment of the thermal power produced to the power dissipated thus avoiding excessive overheating/cooling of the premises Gas Adaptive Control The innovative GAC ( Gas Adaptive Control ) automatic combustion control system guarantees a wide modulation range up to 1:10: high efficiency and energy savings are ensured as the boiler is able to adjust the thermal power produced to the actual power dissipated from the building avoiding excessive heating/cooling of the building. Total modulation pump The circulation pump can operate at maximum speed, minimum speed or in "automatic" mode: in the latter case, the speed (min./max) will be selected so that the delivery/return ∆T in heating remains constant at 20 °C thus ensuring a significant reduction in pump consumption and, given the lower mechanical stresses (compared to a pump that always runs at maximum speed), also in maintenance costs Characteristics: Wide modulation range up to 1:7 greater efficiency and silence GAC (gas adaptive control): automatic combustion control High efficiency circulation pump with total modulation Digital control panel with large backlit LCD display Arrangement for combination with the Baxi integrated solar system Ø50 mm exhaust pipe: solution for restoring flues - mod. 24 kW Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less