icon Ariston boilers | CaldaieMurali

Ariston boilers

452 products


  • Sale -13% immagine-1-ariston-scaldabagno-a-gas-ariston-next-evo-x-outdoor-11-eu-gpl-11-lt-da-esterno-basso-nox-new-erp-cod.-3632457

    Ariston Ariston Next Evo X Outdoor 11 Eu Gpl 11 Lt Gas Water Heater Low Nox New Erp Cod. 3632457

    GAS WATER HEATER ARISTON NEXT EVO X OUTDOOR 11 EU LPG 11 LT BASSO NOX - NEW ERP cod. 3632457 Energy efficiency: Class A Load profile: M profile Characteristics of heating/DHW operation: Gas category II2H3B/P Type A3 Power Supply: Cable Modulation range 1:3 Nominal heat output: 22 kW Minimum thermal power: 7.8 kW Nominal heat input: 19.2 kW Minimum heat input: 6.8 kW Min/max selectable temperature: 35-65°C Maximum nominal pressure: 10 bar Minimum operating pressure: 0.1 bar Minimum operating flow: 3 l/min Flow rate with temperature difference (Δt) 25 °C: 11 l/min Supply voltage (Freq. 50 HZ) V 230 Minimum ambient temperature of use: -20°C Maximum absorbed power: 33W Sound power dB(A) 58 Protection type IP X5 Dimensions (LxHxP): 394x570x180 mm Weight : 13kg Power supply: LPG Warranty: 2 years Ariston X water heaters A complete range of sealed chamber, outdoor and open chamber gas instantaneous water heaters. The whole range complies with the ErP 2018 regulation, which requires a lowering of NOx emissions. In addition to great efficiency, the X range stands out for its simplicity of installation, compact dimensions and comfort. Next Evo X Outdoor The new Low NOx instantaneous outdoor gas water heater characterized by an exclusive design, small dimensions (only 13 cm deep) and new functions. Next Evo X Outdoor is the most efficient water heater in its category and can also be integrated with a solar thermal system. The product is equipped with a simple and intuitive remote control which further facilitates its use and enriches its design. Solar integration Thanks to the kit with thermostatic valve, NEXT EVO X OUTDOOR is set up for the integration of solar systems. An ecological solution to avoid waste and increase energy savings Standard remote control NEXT EVO X OUTDOOR can be controlled remotely thanks to the remote control that can be installed in any indoor environment. In this way it is possible to adjust the temperature from inside the home and also select the ECO operating mode for energy saving. Technical features: Low NOx: ErP compliant 09/26/2018 Temperature control via NTC probes at the inlet and outlet of the exchanger Electronic ignition with flame control Modulation ratio up to 1:5 It does not require a fume exhaust system Standard remote control Minimum operating pressure 0.2 bar Operation even with minimum water flow rates up to 3 l/min Standard antifreeze function: up to -20° IPX5D protection External installation type A3 ANTIFREEZE System that prevents the freezing of the condensation water so that it can operate in heat pump mode even with air at -5 °C HIGH EFFICIENCY Product characterized by high energy performance, reduction of consumption and polluting emissions OUTDOOR INSTALLATION Possibility of outdoor installation thanks to all the weather protection devices. ELECTRONIC TEMPERATURE CONTROL Electronic control panel for easier and more immediate use. SOLAR INTEGRATION Prepared for integration with a solar thermal system. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

    €499,00€434,00

  • Ariston CARES S 30 EU Condensing Boiler Methane or LPG Low NOx Complete with Flue Gas Exhaust Kit 3301638

    Ariston Ariston CARES S 30 EU Condensing Boiler Methane or LPG Low NOx Complete with Flue Gas Exhaust Kit 3301638

    nb: LPG conversion kit supplied as standard Ariston CARES S 30 EU condensing boiler complete with flue gas exhaust kit Methane or LPG low NOx 3301638 - NEW Heating energy class A Energy class A for sanitary facilities XL load profile Nominal heat output max min heating 24.0/5.8 kW kW Nominal thermal capacity max min sanitary 29.0/5.8 kW kW Heating temperature max min 82 / 35 °C Quantity of hot water deltaT=25°C 16.0 litres/min Power supply voltage frequency 230/50 V/Hz Electrical protection grade X5D IP NOx class 6 CARES S The condensing boiler suitable for every need, able to combine great performance and high robustness. Thanks to the stainless steel condensing exchanger, CARES S represents the right balance between comfort and performance. Reduction of energy consumption up to 35% Stainless steel condensing exchanger More robust design thanks to the new metal front panel Better accessibility thanks to the front hydrometer MADE IN ITALY produced entirely in Italy SMALL SIZE small footprint for easy installation SYSTEM MANAGEMENT new communication protocol designed to ensure complete management of the system. Product Warranty All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

    €933,00

  • Ariston Accumulo Inerziale Puffer Ckz 30 Hh 3060531 - CaldaieMurali

    Ariston Ariston Buffer Buffer Ckz 30 Hh 3060531

    PRODUCT AVAILABLE TO ORDER Ariston Buffer buffer tank CKZ 30 hh 3060531 Buffer tank that can be installed under monobloc outdoor units, suitable for both heating and cooling applications. Optional 10 l insulated expansion tank that can be installed inside. Optional 2kW resistor for heating integration

    €726,00

  • immagine-1-ariston-pompa-di-calore-monoblocco-aria-acqua-inverter-ariston-nimbus-pocket-m-net-120-r-32-monofase-3301874-classe-aa

    ARISTON Air-Water Monoblock Heat Pump Inverter Ariston Nimbus Pocket M Net 120 R-32 Single-Phase 3301874 Class A+++/A++

    ATTENTION ! IN CASE OF NO IMMEDIATE AVAILABILITY, THE PRODUCT WILL BE ORDERED AND SHIPPED IN 10 WORKING DAYS FREE FIRST START-UP Technical features Model : NIMBUS POCKET M NET 120 Product code : 3301874 Sensys HD as standard Energy efficiency Energy class in heating at 35° C: A+++ Energy class in heating at 55° C: A++ Heating External air temperature -7°C - Water temperature 30/35°C Nonimal thermal power: 9.51 kW Absorbed electrical power: 2.97 kW COP: 3.20 External air temperature 7°C - Water temperature 30/35°C Thermal power: 12.00 kW Absorbed electrical power: 2.45 kW COP: 4.90 External air temperature 7°C - Water temperature 40/45°C Normal thermal power: 8.20 kW Absorbed electrical power: 2.00 kW COP: 4.10 Cooling External air temperature 35°C - Water temperature 7°/12°C Nonimal cooling capacity: 9.05 kW Absorbed electrical power: 2.87 kW EER: 3.15 External air temperature 35°C - Water temperature 18°/23°C Normal cooling capacity: 10.74 kW Absorbed electrical power: 2.11 kW EER: 5.08 Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R32 Installation data Plumber's Pipe Diameter: 1" inch Male Dimensions and weight Dimensions (WxHxD): 1016x1506x374 mm Empty weight: 124.0 kg Ariston Nimbus Pocket M Net heat pump Heat pump for hot, cold and domestic hot water functions High efficiency packaged inverter heat pump capable of heating and cooling the environment. Thanks to optimal energy management, maximum performance efficiency is guaranteed at any outside temperature. POCKET I do not include the hydraulic module for a space-saving as much as possible. Optimized performance The innovative Energy Manager technology manages the entire hardware and software system, ensuring stable performance at any external temperature and the lowest noise level in its category Total efficiency High levels of efficiency across the entire range for both heating and cooling functions. Already prepared for energy labeling A+++ for heating Built-in connectivity The Ariston NET App allows you to control the heating, cooling and hot water functions directly from your smartphone and provides 24-hour assistance 360° control Through the interface of the integrated Sensys NET system it is possible to effectively control multiple zones, also integrating renewable solar energy, both thermal and photovoltaic, and auxiliary generators Quality 100% GUARANTEED BY ARISTON Every single component is developed with the aim of guaranteeing long-lasting performance and high efficiency, with the guarantee of the Ariston brand. 100% CHECKED AND TESTED Every single Ariston product is rigorously tested in terms of quality, efficiency and safety before being delivered, with superior results guaranteed by our commitment. 100% BUILT TO LAST Strong and super resistant materials, components and products developed to perform in extreme conditions to deliver high-level results with maximum durability Totally safe Designed with the most modern technology and built with selected materials, Ariston heat pumps are totally safe Advantages Inverter packaged heat pump R32 ecological gas COP up to 5.1 Quietness, up to 53 dB(A) Power range from 1.7 to 17.7 kW Sensys HD as standard Light Box electrical box that can also be installed outdoors Plug & Play solution Back up electrical resistance available as an accessory WI-FI connectivity as standard Remote management with the Ariston NET app Optional 24/7 teleassistance Photovoltaic function Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

    €5.200,00

  • immagine-1-ariston-pompa-di-calore-monoblocco-aria-acqua-inverter-ariston-nimbus-pocket-m-net-80-r-32-monofase-3301872-classe-aa

    ARISTON Air-Water Monoblock Heat Pump Inverter Ariston Nimbus Pocket M Net 80 R-32 Single-Phase 3301872 Class A+++/A++

    ATTENTION ! IN CASE OF NO IMMEDIATE AVAILABILITY, THE PRODUCT WILL BE ORDERED AND SHIPPED IN 10 WORKING DAYS FREE FIRST START-UP Technical features Model : NIMBUS POCKET M NET 80 Product code : 3301872 Sensys HD as standard Energy efficiency Energy class in heating at 35° C: A+++ Energy class in heating at 55° C: A++ Heating External air temperature -7°C - Water temperature 30/35°C Nonimal thermal power: 7.41 kW Absorbed electrical power: 2.47 kW COP : 3.00 External air temperature 7°C - Water temperature 30/35°C Thermal power: 8.00 kW Absorbed electrical power: 1.67 kW COP: 4.80 External air temperature 7°C - Water temperature 40/45°C Normal thermal power: 6.00 kW Absorbed electrical power: 1.62 kW COP: 3.70 Cooling External air temperature 35°C - Water temperature 7°/12°C Nonimal cooling capacity: 7.00 kW Absorbed electrical power: 2.26 kW EER: 3.10 External air temperature 35°C - Water temperature 18°/23°C Nonimal cooling capacity: 7.00 kW Absorbed electrical power: 1.49 kW EER: 4.70 Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R32 Installation data Plumber's Pipe Diameter: 1" inch Male Dimensions and weight Dimensions (WxHxD): 1016x1106x374 mm Empty weight: 91.0 kg Ariston Nimbus Pocket M Net heat pump Heat pump for hot, cold and domestic hot water functions High efficiency packaged inverter heat pump capable of heating and cooling the environment. Thanks to optimal energy management, maximum performance efficiency is guaranteed at any outside temperature. POCKET I do not include the hydraulic module for a space-saving as much as possible. Optimized performance The innovative Energy Manager technology manages the entire hardware and software system, ensuring stable performance at any external temperature and the lowest noise level in its category Total efficiency High levels of efficiency across the entire range for both heating and cooling functions. Already prepared for energy labeling A+++ for heating Built-in connectivity The Ariston NET App allows you to control the heating, cooling and hot water functions directly from your smartphone and provides 24-hour assistance 360° control Through the interface of the integrated Sensys NET system it is possible to effectively control multiple zones, also integrating renewable solar energy, both thermal and photovoltaic, and auxiliary generators Quality 100% GUARANTEED BY ARISTON Every single component is developed with the aim of guaranteeing long-lasting performance and high efficiency, with the guarantee of the Ariston brand. 100% CHECKED AND TESTED Every single Ariston product is rigorously tested in terms of quality, efficiency and safety before being delivered, with superior results guaranteed by our commitment. 100% BUILT TO LAST Strong and super resistant materials, components and products developed to perform in extreme conditions to deliver high-level results with maximum durability Totally safe Designed with the most modern technology and built with selected materials, Ariston heat pumps are totally safe Advantages Inverter packaged heat pump R32 ecological gas COP up to 5.1 Quietness, up to 53 dB(A) Power range from 1.7 to 17.7 kW Sensys HD as standard Light Box electrical box that can also be installed outdoors Plug & Play solution Back up electrical resistance available as an accessory WI-FI connectivity as standard Remote management with the Ariston NET app Optional 24/7 teleassistance Photovoltaic function Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

    €3.260,00

  • immagine-1-ariston-pompa-di-calore-monoblocco-aria-acqua-inverter-ariston-nimbus-pocket-m-net-50-r-32-monofase-3301871-classe-aa

    ARISTON Air-Water Monoblock Heat Pump Inverter Ariston Nimbus Pocket M Net 50 R-32 Single-Phase 3301871 Class A+++/A++

    ATTENTION ! IN CASE OF NO IMMEDIATE AVAILABILITY, THE PRODUCT WILL BE ORDERED AND SHIPPED IN 10 WORKING DAYS FREE FIRST START-UP Technical features Model : NIMBUS POCKET M NET 50 Product code : 3301871 Sensys HD as standard Energy efficiency Energy class in heating at 35° C: A+++ Energy class in heating at 55° C: A++ Heating External air temperature -7°C - Water temperature 30/35°C Nonimal thermal power: 5.00 kW Absorbed electrical power: 1.72 kW COP : 2.90 External air temperature 7°C - Water temperature 30/35°C Normal thermal power: 5.00 kW Absorbed electrical power: 1.00 kW COP : 5.00 External air temperature 7°C - Water temperature 40/45°C Thermal power: 4.05 kW Absorbed electrical power: 1.11 kW COP: 3.65 Cooling External air temperature 35°C - Water temperature 7°/12°C Nonimal cooling capacity: 5.00 kW Absorbed electrical power: 1.75 kW EER: 2.85 External air temperature 35°C - Water temperature 18°/23°C Nonimal cooling capacity: 4.63 kW Absorbed electrical power: 1.02 kW EER: 4.56 Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R32 Installation data Plumber's Pipe Diameter: 1" inch Male Dimensions and weight Dimensions (WxHxD): 1016x756x374 mm Empty weight: 66.0 kg Ariston Nimbus Pocket M Net heat pump Heat pump for hot, cold and domestic hot water functions High efficiency packaged inverter heat pump capable of heating and cooling the environment. Thanks to optimal energy management, maximum performance efficiency is guaranteed at any outside temperature. POCKET I do not include the hydraulic module for a space-saving as much as possible. Optimized performance The innovative Energy Manager technology manages the entire hardware and software system, ensuring stable performance at any external temperature and the lowest noise level in its category Total efficiency High levels of efficiency across the entire range for both heating and cooling functions. Already prepared for energy labeling A+++ for heating Built-in connectivity The Ariston NET App allows you to control the heating, cooling and hot water functions directly from your smartphone and provides 24-hour assistance 360° control Through the interface of the integrated Sensys NET system it is possible to effectively control multiple zones, also integrating renewable solar energy, both thermal and photovoltaic, and auxiliary generators Quality 100% GUARANTEED BY ARISTON Every single component is developed with the aim of guaranteeing long-lasting performance and high efficiency, with the guarantee of the Ariston brand. 100% CHECKED AND TESTED Every single Ariston product is rigorously tested in terms of quality, efficiency and safety before being delivered, with superior results guaranteed by our commitment. 100% BUILT TO LAST Strong and super resistant materials, components and products developed to perform in extreme conditions to deliver high-level results with maximum durability Totally safe Designed with the most modern technology and built with selected materials, Ariston heat pumps are totally safe Advantages Inverter packaged heat pump R32 ecological gas COP up to 5.1 Quietness, up to 53 dB(A) Power range from 1.7 to 17.7 kW Sensys HD as standard Light Box electrical box that can also be installed outdoors Plug & Play solution Back up electrical resistance available as an accessory WI-FI connectivity as standard Remote management with the Ariston NET app Optional 24/7 teleassistance Photovoltaic function Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

    €3.125,00

  • immagine-1-ariston-pompa-di-calore-monoblocco-aria-acqua-inverter-ariston-nimbus-pocket-m-net-35-r-32-monofase-3301870-classe-aa

    ARISTON Air-Water Monoblock Heat Pump Inverter Ariston Nimbus Pocket M Net 35 R-32 Single-Phase 3301870 Class A+++/A++

    ATTENTION ! IN CASE OF NO IMMEDIATE AVAILABILITY, THE PRODUCT WILL BE ORDERED AND SHIPPED IN 10 WORKING DAYS FREE FIRST START-UP Technical features Model : NIMBUS POCKET M NET 35 Product code : 3301870 Sensys HD as standard Energy efficiency Energy class in heating at 35° C: A+++ Energy class in heating at 55° C: A++ Heating External air temperature -7°C - Water temperature 30/35°C Nonimal thermal power: 3.51 kW Absorbed electrical power: 1.13 kW COP: 3.10 External air temperature 7°C - Water temperature 30/35°C Normal thermal power: 3.50 kW Absorbed electrical power: 0.69 kW COP: 5.10 External air temperature 7°C - Water temperature 40/45°C Thermal power: 3.00 kW Absorbed electrical power: 0.80 kW COP: 3.74 Cooling External air temperature 35°C - Water temperature 7°/12°C Nonimal cooling capacity: 3.50 kW Absorbed electrical power: 1.03 kW EER: 3.40 External air temperature 35°C - Water temperature 18°/23°C Normal cooling capacity: 4.08 kW Absorbed electrical power: 0.77 kW EER: 5.29 Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R32 Installation data Plumber's Pipe Diameter: 1" inch Male Dimensions and weight Dimensions (WxHxD): 1016x756x374 mm Empty weight: 66.0 kg Ariston Nimbus Pocket M Net heat pump Heat pump for hot, cold and domestic hot water functions High efficiency packaged inverter heat pump capable of heating and cooling the environment. Thanks to optimal energy management, maximum performance efficiency is guaranteed at any outside temperature. POCKET I do not include the hydraulic module for a space-saving as much as possible. Optimized performance The innovative Energy Manager technology manages the entire hardware and software system, ensuring stable performance at any external temperature and the lowest noise level in its category Total efficiency High levels of efficiency across the entire range for both heating and cooling functions. Already prepared for energy labeling A+++ for heating Built-in connectivity The Ariston NET App allows you to control the heating, cooling and hot water functions directly from your smartphone and provides 24-hour assistance 360° control Through the interface of the integrated Sensys NET system it is possible to effectively control multiple zones, also integrating renewable solar energy, both thermal and photovoltaic, and auxiliary generators Quality 100% GUARANTEED BY ARISTON Every single component is developed with the aim of guaranteeing long-lasting performance and high efficiency, with the guarantee of the Ariston brand. 100% CHECKED AND TESTED Every single Ariston product is rigorously tested in terms of quality, efficiency and safety before being delivered, with superior results guaranteed by our commitment. 100% BUILT TO LAST Strong and super resistant materials, components and products developed to perform in extreme conditions to deliver high-level results with maximum durability Totally safe Designed with the most modern technology and built with selected materials, Ariston heat pumps are totally safe Advantages Inverter packaged heat pump R32 ecological gas COP up to 5.1 Quietness, up to 53 dB(A) Power range from 1.7 to 17.7 kW Sensys HD as standard Light Box electrical box that can also be installed outdoors Plug & Play solution Back up electrical resistance available as an accessory WI-FI connectivity as standard Remote management with the Ariston NET app Optional 24/7 teleassistance Photovoltaic function Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

    €3.000,00

  • Ariston Kit By-Pass Differenziale Regolabile Per Sistemi Ibridi Integrati Con Pompe Di Calore - CaldaieMurali

    Ariston Ariston Adjustable Differential By-Pass Kit For Integrated Hybrid Systems With Heat Pumps

    NB: AVAILABLE ON ORDER ARISTON ADJUSTABLE DIFFERENTIAL BY-PASS KIT Kit with differential bypass valve and possibility of regulation RECOMMENDED

    €70,00

  • immagine-1-ariston-scaldabagno-a-pompa-di-calore-ariston-lydos-hybrid-80-eu-con-tecnologia-ibrida-new-erp-ean-5414849701120

    Ariston Ariston Lydos Hybrid 80 EU Heat Pump Water Heater with Hybrid Technology - NEW ErP

    Ariston Lydos Hybrid 80 EU Heat Pump Water Heater with Hybrid Technology - NEW ErP Product code: 3629052 Energy label specifications according to European ErP directive Energy efficiency: Class A Load profile: M profile Heating/sanitary operation features: Capacity 80 litres Power kW 1.2 Average absorbed electrical power kW 0.19 Max absorbed electrical power kW 1.42 Voltage V 220-240 i-Memory warm-up time (ΔT=43°C) h,min 5,25 Boost heating time (ΔT=43°C) h,min 2,34 Green heating time (ΔT=43°C) h,min 9,21 Maximum operating pressure bar 8.0 Min/max air temperature °C 12/40 Sound power dB 49 Weight 37.5 kg IP X4 protection Lydos Hybrid Energy Saving 50% Every Day. Lydos Hybrid is the first water heater with hybrid technology in class A that allows you to save 50% of energy compared to one in class B, thanks to the combined use of energy from the heat pump and electricity. Hybrid Intelligence. The innovative i-Memory software learns your habits to efficiently manage the hybrid technology, choosing the most convenient option between using heat pump energy and electric energy. After an initial learning phase, the i-Memory is able to program the water temperature every hour, in order to meet the user's needs while saving time and energy. Superior Performance. Thanks to Hybrid Intelligence and i-Memory, hot water is always available when required. The BOOST function speeds up the production of hot water and the Shower Ready icon notifies you when the first shower is ready. Simple installation . Designed to be as easy to install as any electric water heater No additional work is required thanks to the compatibility with the supports and water connections of standard Ariston electric water heaters The hydraulic connections are completely hidden inside the product itself. Italian style and intuitive design thanks to the advanced hi-tech interface.  Functions: i-MEMORY: Chooses the best compromise between comfort and efficiency based on the user's habits. The temperature and quantity of hot water are set based on energy consumption over the last four weeks. Managing the operation of the resistance and the heat pump is therefore an improving process. Green It achieves maximum efficiency by using the heat pump at 100%. The maximum temperature that can be reached is 53°C and cannot be increased. The electrical resistance is activated only with Anti-legionella, or in the event of a heat pump malfunction. Boost Temporarily increases the electrical power of the product, in case of hot water need within a short time. The resistance and the heat pump work together up to 53°C, after which the temperature is regulated only by the resistance. When the desired temperature is reached, the Boost function deactivates. Program Desired time and temperature program to optimize consumption thanks to hybrid technology. It allows the user to choose two different temperatures at two different times. It works in heat pump or, if necessary, in resistance. Lydos Hybrid In Summary: First electric water heater with hybrid technology in class A 50% savings compared to a class B water heater i-Memory, Program, Green and Boost function Active anode + magnesium Incoloy nickel alloy enamelled resistance, anti-noise and anti-corrosion Replacing old water heaters Ease of installation Hidden hydraulic connections Condensation collection tray available as an accessory

    €560,00

  • Sale -7% immagine-1-ariston-caldaia-ariston-a-condensazione-clas-one-l-30-kw-metano-completa-di-kit-scarico-fumi-wi-fi-optional-ean-8056138597471

    Ariston Ariston Condensing Boiler Clas One L 30 Kw Methane Complete With Optional Wi-Fi Fume Exhaust Kit

    ARISTON CONDENSING BOILER CLAS ONE L 30 kW METHANE COMPLETE WITH FUME EXHAUST KIT Wi-Fi OPTIONAL Technical features Product code: 3301024 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Nominal heat input max/min heating kW 28 / 4.3 Nominal DHW max/min heat input kW 30 / 4.3 Useful heat output max/min heating kW 27.4 / 3.9 Efficiency at nominal heat input (60/80°C) 97.9% Efficiency at nominal heat input (30/50°C) 107.3% Efficiency at 30% (30°C) 109.6% Heating max/min temperature (high temperature) °C 83/35 Heating max/min temperature (low temperature) °C 46/20 Max/min domestic hot water temperature °C 61 / 36 quantity of hot water (deltaT 25°C) 16.4 l/min Quantity of hot water (deltaT 35°C) 11.7 l/min Specific flow rate (first 10' with deltaT 30°C) 14.5 l/min Minimum operating temperature (-5°C with antifreeze kit)** °C > 0° Total absorbed electrical power 78 W Degree of protection of the electrical system IP X5D Dimensions 24 kW mm (HxWxD) 745 x 400 x 315 Power supply: METHANE Functionality: Wi-Fi optional XtraTech™ stainless steel primary exchanger AUTO, Comfort functions Indoor installation and partially protected places ONE Series, the new generation of condensing boilers New XTRATECH™ exchanger: Maximum quality. XtraTech™ is the new exclusive* Ariston stainless steel heat exchanger, the heart of the ONE condensing boilers, developed to guarantee reliability and performance over time. Increased passage sections: +142% compared to the previous exchanger. Higher prevalence, lower risk of clogging, better performance. Every day, as if it were the first. Every single component has been designed to guarantee performance and durability over time: Ariston guarantee, shown in each component. Every single component has been rigorously tested and controlled on the production line. 100% of the boilers are tested again before being shipped to our customers. The best materials have been selected, to work for a long time even in the most critical situations. Excellent results, over time Always connected with Ariston NET Wherever you are, always within reach of your Smartphone. Managing the comfort of your home has never been easier! Wherever you are, you can control the climate in your home using your smartphone. Use only the energy it needs. Easy to manage weekly time programming, directly from the app. Also, choose the savings "leaflet" for a real reduction in bill costs! Technical support always ON. Thanks to the innovative remote control system, the app warns your customer in case of malfunctions. By signing a maintenance contract, the Assistance Center will be able to intervene in the event of breakdowns, even remotely. Customer serenity is at the heart of Ariston NET. Absolute efficiency: Thermoregulation in class A+ The ONE condensing boilers achieve very high seasonal performance and thanks to the thermoregulation they reach class A+ ! Alteas and Genus ONE are also equipped with the innovative IGNITION system, which makes combustion always perfect thanks to the electronic control. Gas transformation? No problem, from the technical menu in one touch. Total Comfort: Innovative functions to meet your needs ONE is equipped with an innovative set of smart functions to guarantee comfort every day with minimum waste of energy. Auto function: Patented function that allows you to automatically optimize the operation of the boiler, eliminating continuous switching on and off, reducing the stress on the components to a minimum. Comfort function: Hot water without any waiting! Lots of water with minimum energy consumption. Integrated Programming: Weekly hourly programming integrated into Alteas and Genus ONE products. Care function: Automatic reminder of routine maintenance. NEW CLASS ONE L Clas ONE 30 L is the ideal condensing boiler for replacement, especially on large old systems. Advantages compared to the Clas ONE 30: 10-litre oversized expansion tank, 7-metre oversized high-efficiency circulator, 20-plate DHW exchanger, bypass with rigid spring. New XtraTech™ exchanger in exclusive* Ariston stainless steel, with high head Exchanger passage sections +142% compared to the previous version LCD display Class A+ in heating reachable with thermoregulation Modulation ratio 1:7 Prepared for Ariston NET connectivity BusBridgeNet® communication protocol AUTO function, Comfort Optimized internal silencer Sanitary heat exchanger increased 20 plates Expansion vessel increased real 10 l By-pass with rigid spring High efficiency circulator increased 7 m Installation in partially protected places Smoke outlet 80, 60, 50 mm Ecodesign directive: from 2015 only new condensing boilers After very long negotiations , the Ecodesign regulation was approved which introduces a new energy labeling on the minimum efficiency standards for boilers. In particular, an energy classification from A+ to G is envisaged for space heating appliances and from A to G for domestic hot water production appliances. Hence the obligation to install only condensing boilers, heat generators capable of recovering a large part of the latent heat contained in the fumes which, otherwise, would be dispersed in the chimney as occurs in traditional boilers. The recovered heat is transferred to the heating system, allowing to reach an efficiency of 106% against 92% of the traditional boiler and 84/85% of an old traditional generator. The installation obligation concerns boiler manufacturers who will no longer be able to place non-condensing ones on the market starting from 26 September 2015 . This means that starting from this date, anyone wishing to install a boiler in their own home will only have to install condensing models. Only a particular type of non-condensing boiler will continue to be produced which is technically called "open chamber" to be installed when it is not possible to replace an old boiler with a condensing boiler due to problems related to the collective flue of some multi-family buildings . What is Energy Labeling? Products for heating water and the environment represent around 30% of internal energy consumption in Europe. Designing eco-friendly products and promoting high performance technologies to end users in 2020 will lead to: An annual energy saving equivalent to 56 million tons of oil, quantifiable to the savings obtained if the water and environmental heating systems of two large nations such as Italy were deactivated. As of 26 September 2015, ErP regulation and energy labeling will be applied in Europe to water and space heating products (boilers, heat pumps, micro-CHP devices, water heaters, and water storage tanks hot. How to read energy labels There are different labels, based on the type and functions of the product (water heating or space heating only or both, and in this case the label must show both classifications). In addition to the energy class, the label provides other information that could be useful for understanding which product has the least environmental impact (for example power and consumption in different climatic zones, noise, etc.). It is possible to increase the energy efficiency of hot water production and space heating by connecting several products and accessories in one system. In this case it is necessary to prepare a system label in addition to that relating to the single product Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

    €1.020,00€950,00

  • Sale -19% Caldaia a Condensazione Ariston MATIS CONDENS PLUS 24 Kw Metano/Gpl Completa di Kit Scarico Fumi

    Ariston Caldaia a Condensazione Ariston MATIS CONDENS PLUS 24 Kw Metano/Gpl Completa di Kit Scarico Fumi

    Caratteristiche tecniche: Display mini LCD Scambiatore in acciaio inox AISI 304 L Rapporto di modulazione 1:5 Temperatura minima di funzionamento fino a > 0°C Silenziosa e Compatta Scarico fumi 80, 60, 50 mm Funzionamento METANO / GPL con kit di serie inclusoModello : Matis Condens Plus Codice prodotto : 3301327 Alimentazione : Metano/gpl Efficienza energetica Classe di efficienza energetica riscaldamento : A Classe di efficienza energetica sanitario : A Profilo : XL Performance Portata termica nominale in riscaldamento PCI : kW 22,0 / 5,5  Portata termica nominale in sanitario PCI : kW 26,0 / 5,5 Potenza termica riscaldamento max/min (80°C-60°C): kW 21,3 / 5,2 Potenza termica max/min (50°C-30°C) :  kW 23,6 / 5,8 Rendimento alla portata termica nominale (60/80°C) : 97,5% Rendimento alla portata termica nominale (30/50°C) : 107,3% Rendimento al 30% a 30°C : 108,97% Temperatura max/min riscaldamento (alta temp.) 82 / 35 °C Temperatura max/min riscaldamento (bassa temp.) 45 / 20 °C Temperatura sanitario : 36° ~ 60°C Quantità di acqua calda ∆T=25°C 14,9 l/m Quantità di acqua calda ∆T=35°C 10,6 l/m Portata specifica (primi 10’ con ΔT=30°C) 12,4 l/m Tensione/frequenza di alimentazione V/Hz 230/50 Potenza elettrica assorbita totale W 87 Gradi di protezione impianto elettrico IP X5D Dimensioni e peso Dimensioni (AxLxP) : 745x400x315 mm Peso : 32,0 Kg ARISTON MATIS CONDENS PLUS 24 - 30 KW   La caldaia è disponibile in riscaldamento e produzione di acqua calda sanitaria. Il prodotto è dotato di uno scambiatore primario isotermico in acciaio inox e scambiatore sanitario a piastre per assicurare la massima affidabilità e comfort. La caldaia è inoltre dotata di un sistema di autodiagnosi che consente il controllo dello stato di salute della caldaia attraverso la protezione antigelo, anticalcare e anti bloccaggio del circolatore. La caldaia Matis Condens Plus, da installazione interna, con alimentazione a metano/GPL e appartiene alla classe energetica A per ottenere sempre il massimo risparmio ed è disponibile in 2 potenze 24 kW e 30 kW. Garanzia prodotto : Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.

    €799,00€650,00

  • immagine-1-ariston-scaldabagno-elettrico-ariston-ad-accumulo-velis-vls-wifi-dune-100-eu-3626296-100-litri-novita

    Ariston Electric storage water heater Ariston Velis Vls Wifi Dune 100 Eu 3626296 100 Liters - New

    Electric water heater Ariston Accumulation Velis Vls Dune wifi 100 Eu 3626296 100 Liters - NEW Technical features Product code: 3626296 Energy label specifications according to the European ErP directive Energy efficiency: Class B Withdrawal profile: M profile Characteristics of heating/DHW operation: Capacity: 100 litres Installation: Multiposition V/H Power: 1500W Voltage: 230V Heating time (ΔT=45°C): 2.50 Time required for the first shower: 50 min Max working pressure: 8 bar Max operating temperature °C 80 Overall dimensions mm 1251x880 Weight 32Kg Protection: IPX4 VELIS DUNE WIFI With the Velis Dune WiFi electric water heater, Ariston takes a step forward towards the future: the best technology of the brand and all the innovations introduced with the Velis EVO model are enriched in this model by wi-fi connectivity . Its compactness, installation versatility combined with the typical Ariston construction quality, make it a leading item in the panorama of electric storage water heaters. It is presented here in the version with 100-litre storage tank. Characteristics: Remotely manageable via the AQUA ARISTON NET App Super thin thickness Elegant and exclusive design Multi-function LCD display Multiposition H/V installation First shower available in half the time ECO EVO function Shower Ready function Anti-legionella function Anti-noise enamelled resistance Double magnesium anode ANTI-LEGIONELLA function To ensure maximum safety and hygiene, the new Ariston products with ABS package are equipped with the anti-legionella function which, if this does not happen for 30 consecutive days, heats the stored water up to 65° c. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

    €432,00

Recently viewed products

Login

Forgot your password?

Don't have an account yet?
Create account