THIS ITEM WILL BE REPLACED WITH THE NEW MODEL NEXT EVO X 16 LT. COD. PRODUCT 3632433 Technical features Product code: 3632165 Energy label specifications according to the European ErP directive Energy efficiency: Class A Load profile: XL profile Characteristics of heating/DHW operation: Category II 2H3P Nominal thermal power kW 28 Minimum thermal power kW 5.4 Modulation range 6 - 31.0 Nominal heat input kW 31 Maximum nominal pressure 8.5 bar Minimum operating pressure 0.1 bar Minimum operating flow l/min > 2.0 Flow rate (ΔT 25°C) l/min 16.0 Flow rate with temperature difference (Δt) 25 °C l/min 8.5 Supply voltage (Freq. 50 HZ) V 230 Maximum absorbed power W 49 Protection type IPX4D Power supply: LPG General characteristics Next Evo EU The sealed chamber instantaneous water heater Ariston launches Next Evo , the new instantaneous gas water heater for the production of domestic hot water. Characterized by an exclusive design, reduced dimensions and new functions, Next Evo is even more efficient and easy to use. The innovative electronic control of Next Evo allows you to adjust, via an intuitive LCD display, the ideal temperature for the user and to keep it constant even when the required water flow varies, thanks to the two NTC probes which measure the temperature of the both incoming and outgoing water. The central position of the smoke outlet and the extremely reduced depth (only 17.5 cm) make it extremely flexible and easy to install. Maximum energy saving is ensured by the possible integration of Next Evo with natural and forced circulation thermal solar systems: the solar kit with thermostatic valve has been designed precisely to facilitate its implementation. A new, innovative way of conceiving solar integration: versatile, practical and easy to install Characteristics: Ultra compact: only 17.5 cm deep Thermostatic: modulating temperature control via NTC probes allowing high standards in terms of energy saving and comfort Flame ionisation electronic ignition with gas savings of up to 25% compared to older generations Operation with water pressure 0.1 bar Operation even with minimum water flow rates > 2 l/min Can be integrated with solar thermal systems Presence of the smoke pressure switch Presence of the water flow switch IPX4D electrical protection Ecodesign Directive After very long negotiations , the Ecodesign regulation was approved which introduces a new energy labeling on the minimum efficiency standards for boilers. In particular, an energy classification from A+ to G is envisaged for space heating appliances and from A to G for domestic hot water production appliances. Hence the obligation to install only condensing boilers, heat generators capable of recovering a large part of the latent heat contained in the fumes which, otherwise, would be dispersed in the chimney as occurs in traditional boilers. The recovered heat is transferred to the heating system, allowing to reach an efficiency of 106% against 92% of the traditional boiler and 84/85% of an old traditional generator. The installation obligation concerns boiler manufacturers who will no longer be able to place non-condensing ones on the market starting from 26 September 2015 . This means that starting from this date, anyone wishing to install a boiler in their own home will only have to install condensing models. Only a particular type of non-condensing boiler will continue to be produced which is technically called "open chamber" to be installed when it is not possible to replace an old boiler with a condensing boiler due to problems related to the collective flue of some multi-family buildings . What is Energy Labeling? Products for heating water and the environment represent around 30% of internal energy consumption in Europe. Designing eco-friendly products and promoting high performance technologies to end users in 2020 will lead to: An annual energy saving equivalent to 56 million tons of oil, quantifiable to the savings obtained if the water and environmental heating systems of two large nations such as Italy were deactivated. As of 26 September 2015, ErP regulation and energy labeling will be applied in Europe to water and space heating products (boilers, heat pumps, micro-CHP devices, water heaters, and water storage tanks hot)¹. How to read energy labels There are different labels, based on the type and functions of the product (water heating or space heating only or both, and in this case the label must show both classifications). In addition to the energy class, the label provides other information that could be useful for understanding which product has the least environmental impact (for example power and consumption in different climatic zones, noise, etc.). It is possible to increase the energy efficiency of hot water production and space heating by connecting several products and accessories in one system. In this case it is necessary to prepare a system label in addition to that relating to the single product Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

NB Article out of production in case of unavailability of the product the new model NEXT EVO X 11 will be shipped Technical features Product code: 3632160 Energy label specifications according to the European ErP directive Energy efficiency: Class A Load profile: M profile Characteristics of heating/DHW operation: Category II 2H3P Nominal thermal power kW 19.5 Minimum thermal power kW 4.5 Modulation range 5 - 21.5 Nominal heat input kW 21.5 Maximum nominal pressure 8.5 bar Minimum operating pressure 0.1 bar Minimum operating flow l/min > 2.0 Flow rate (ΔT 25°C) l/min 11.0 Flow rate with temperature difference (Δt) 25 °C l/min 8.5 Supply voltage (Freq. 50 HZ) V 230 Maximum absorbed power W 37 Protection type IPX4D Power supply: METHANE General characteristics Next Evo EU The sealed chamber instantaneous water heater Ariston launches Next Evo , the new instantaneous gas water heater for the production of domestic hot water. Characterized by an exclusive design, reduced dimensions and new functions, Next Evo is even more efficient and easy to use. The innovative electronic control of Next Evo allows you to adjust, via an intuitive LCD display, the ideal temperature for the user and to keep it constant even when the required water flow varies, thanks to the two NTC probes which measure the temperature of the both incoming and outgoing water. The central position of the smoke outlet and the extremely reduced depth (only 17.5 cm) make it extremely flexible and easy to install. Maximum energy saving is ensured by the possible integration of Next Evo with natural and forced circulation thermal solar systems: the solar kit with thermostatic valve has been designed precisely to facilitate its implementation. A new, innovative way of conceiving solar integration: versatile, practical and easy to install Characteristics: Ultra compact: only 17.5 cm deep Thermostatic: modulating temperature control via NTC probes allowing high standards in terms of energy saving and comfort Flame ionisation electronic ignition with gas savings of up to 25% compared to older generations Operation with water pressure 0.1 bar Operation even with minimum water flow rates > 2 l/min Can be integrated with solar thermal systems Presence of the smoke pressure switch Presence of the water flow switch IPX4D electrical protection Ecodesign Directive After very long negotiations , the Ecodesign regulation was approved which introduces a new energy labeling on the minimum efficiency standards for boilers. In particular, an energy classification from A+ to G is envisaged for space heating appliances and from A to G for domestic hot water production appliances. Hence the obligation to install only condensing boilers, heat generators capable of recovering a large part of the latent heat contained in the fumes which, otherwise, would be dispersed in the chimney as occurs in traditional boilers. The recovered heat is transferred to the heating system, allowing to reach an efficiency of 106% against 92% of the traditional boiler and 84/85% of an old traditional generator. The installation obligation concerns boiler manufacturers who will no longer be able to place non-condensing ones on the market starting from 26 September 2015 . This means that starting from this date, anyone wishing to install a boiler in their own home will only have to install condensing models. Only a particular type of non-condensing boiler will continue to be produced which is technically called "open chamber" to be installed when it is not possible to replace an old boiler with a condensing boiler due to problems related to the collective flue of some multi-family buildings . What is Energy Labeling? Products for heating water and the environment represent around 30% of internal energy consumption in Europe. Designing eco-friendly products and promoting high performance technologies to end users in 2020 will lead to: An annual energy saving equivalent to 56 million tons of oil, quantifiable to the savings obtained if the water and environmental heating systems of two large nations such as Italy were deactivated. As of 26 September 2015, ErP regulation and energy labeling will be applied in Europe to water and space heating products (boilers, heat pumps, micro-CHP devices, water heaters, and water storage tanks hot)¹. How to read energy labels There are different labels, based on the type and functions of the product (water heating or space heating only or both, and in this case the label must show both classifications). In addition to the energy class, the label provides other information that could be useful for understanding which product has the least environmental impact (for example power and consumption in different climatic zones, noise, etc.). It is possible to increase the energy efficiency of hot water production and space heating by connecting several products and accessories in one system. In this case it is necessary to prepare a system label in addition to that relating to the single product Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

THIS ITEM WILL BE REPLACED WITH NEXT EVO X 16 LT. COD. 3632433 Technical features Product code: 3632165 Energy label specifications according to the European ErP directive Energy efficiency: Class A Load profile: XL profile Characteristics of heating/DHW operation: Category II 2H3P Nominal thermal power kW 28 Minimum thermal power kW 5.4 Modulation range 6 - 31.0 Nominal heat input kW 31 Maximum nominal pressure 8.5 bar Minimum operating pressure 0.1 bar Minimum operating flow l/min > 2.0 Flow rate (ΔT 25°C) l/min 16.0 Flow rate with temperature difference (Δt) 25 °C l/min 8.5 Supply voltage (Freq. 50 HZ) V 230 Maximum absorbed power W 49 Protection type IPX4D Power supply: METHANE General characteristics Next Evo EU The sealed chamber instantaneous water heater Ariston launches Next Evo , the new instantaneous gas water heater for the production of domestic hot water. Characterized by an exclusive design, reduced dimensions and new functions, Next Evo is even more efficient and easy to use. The innovative electronic control of Next Evo allows you to adjust, via an intuitive LCD display, the ideal temperature for the user and to keep it constant even when the required water flow varies, thanks to the two NTC probes which measure the temperature of the both incoming and outgoing water. The central position of the smoke outlet and the extremely reduced depth (only 17.5 cm) make it extremely flexible and easy to install. Maximum energy saving is ensured by the possible integration of Next Evo with natural and forced circulation thermal solar systems: the solar kit with thermostatic valve has been designed precisely to facilitate its implementation. A new, innovative way of conceiving solar integration: versatile, practical and easy to install Characteristics: Ultra compact: only 17.5 cm deep Thermostatic: modulating temperature control via NTC probes allowing high standards in terms of energy saving and comfort Flame ionisation electronic ignition with gas savings of up to 25% compared to older generations Operation with water pressure 0.1 bar Operation even with minimum water flow rates > 2 l/min Can be integrated with solar thermal systems Presence of the smoke pressure switch Presence of the water flow switch IPX4D electrical protection Ecodesign Directive After very long negotiations , the Ecodesign regulation was approved which introduces a new energy labeling on the minimum efficiency standards for boilers. In particular, an energy classification from A+ to G is envisaged for space heating appliances and from A to G for domestic hot water production appliances. Hence the obligation to install only condensing boilers, heat generators capable of recovering a large part of the latent heat contained in the fumes which, otherwise, would be dispersed in the chimney as occurs in traditional boilers. The recovered heat is transferred to the heating system, allowing to reach an efficiency of 106% against 92% of the traditional boiler and 84/85% of an old traditional generator. The installation obligation concerns boiler manufacturers who will no longer be able to place non-condensing ones on the market starting from 26 September 2015 . This means that starting from this date, anyone wishing to install a boiler in their own home will only have to install condensing models. Only a particular type of non-condensing boiler will continue to be produced which is technically called "open chamber" to be installed when it is not possible to replace an old boiler with a condensing boiler due to problems related to the collective flue of some multi-family buildings . What is Energy Labeling? Products for heating water and the environment represent around 30% of internal energy consumption in Europe. Designing eco-friendly products and promoting high performance technologies to end users in 2020 will lead to: An annual energy saving equivalent to 56 million tons of oil, quantifiable to the savings obtained if the water and environmental heating systems of two large nations such as Italy were deactivated. As of 26 September 2015, ErP regulation and energy labeling will be applied in Europe to water and space heating products (boilers, heat pumps, micro-CHP devices, water heaters, and water storage tanks hot)¹. How to read energy labels There are different labels, based on the type and functions of the product (water heating or space heating only or both, and in this case the label must show both classifications). In addition to the energy class, the label provides other information that could be useful for understanding which product has the least environmental impact (for example power and consumption in different climatic zones, noise, etc.). It is possible to increase the energy efficiency of hot water production and space heating by connecting several products and accessories in one system. In this case it is necessary to prepare a system label in addition to that relating to the single product Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Heat pump water heater Ariston Nuos Primo 80 class A code 3623238 accumulation 80 liters Technical features Product code: 3623238 Energy label specifications according to the European ErP directive Energy efficiency: Class A Load profile: M profile Characteristics of heating/DHW operation: COP* 2.32 Heating time* h:min 5:20 Min/max air temperature °C 10/40 Max water temperature heat pump only/with R °C 55/75 Sound power *** dB(A) 54 Average absorbed electrical power W 250 Nominal accumulation capacity l 80 Maximum working pressure bar 8 Maximum absorbed voltage/power V/W 220-240/1550 Resistance power W 1200 Standard air flow m3/h 170 Minimum volume of the installation room** m3 20 Empty weight kg 45 IP24 electrical protection Insulation thickness mm 31 Diameter of water connections " 1/2M Minimum storage room temperature °C 1 Thermal dispersions (Pes)* W 17 Available static pressure Pa 65 Annual energy consumption (average climate)* kWh/year 533 Seasonal yield* % 96 V40 (quantity of water mixed at 40°C)* l 91 New Primo  An advanced efficient and sustainable solution. It uses the heat from the air as a renewable energy source to obtain the greatest comfort and savings. Working range in heat pump with air temperatures from 10 to 40°C Ambient air product Ecological gas R134a allows to reach water temperatures up to 55°C in heat pump Condenser wrapped around the boiler (not immersed in water) Titanium enamelled steel boiler Supplementary electrical resistance Magnesium anti-corrosion anode LED displays Functions: green, boost, auto, hourly programming of withdrawals and anti-legionella Product for internal installation Excellent for a family of 3-5 Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Product code: 3632256 Energy label specifications according to the European ErP directive Energy efficiency: Class A Load profile: M profile Power supply: METHANE Characteristics of heating/DHW operation: CE certification (pin) 0051CM4090 Category II 2H3P Nominal thermal power kW 20.0 Minimum thermal power kW 4.2 Modulation range 1 : 4.8 Nominal heat input kW 22.0 Min/max temperature selectable 35-70 Maximum nominal pressure 8.5 bar Minimum operating pressure 0.1 bar Minimum operating flow l/min > 2.0 Flow rate (ΔT 25°C) l/min 11.0 Supply voltage (frequency 50 HZ) V 230-50 Maximum absorbed power W 37 Minimum ambient temperature of use °C -20 Electrical protection type IPX5D Dimensions and weight Dimensions (HxWxD): 563 x 350 x 130 mm Weight: 11.6kg Next Outdoor EU The generation of gas water heaters for outdoor use Next Outdoor, the new instantaneous gas water heater for outdoor use. Featuring an exclusive design, small size (only 13cm deep!) and new features. Next outdoor offers maximum temperature stability thanks to the electronic modulation of the gas and the fan, the wide modulation ratio between the maximum and minimum power, and the automatic water flow regulator. With the bathroom function, Next outdoor allows you to have the ideal quantity and temperature for maximum relaxation. Thanks to the introduction of the PROFESSIONAL 20 and 24 l/min models, the Ariston range for the outdoor version is completed, without however renouncing an attractive design and the compactness that distinguishes it on the market. The Next Outdoor, thanks to the remote control, has all the functions at hand and the small size makes it easily adaptable to any type of outdoor environment. Furthermore, thanks to the models of the new PROFESSIONAL range (20 and 24 l/min) it is able to manage up to a maximum of 5 products in cascade. Next Outdoor is the most efficient in its category and can also be integrated with solar systems. Thanks to the kit with thermostatic valve, the NEXT OUTDOOR is set up for integration and management of solar systems. An ecological and clean solution to avoid waste and encourage energy saving. Characteristics: External installation type A3 It does not require a fume exhaust system Standard remote control: with the remote control it is possible to change the temperature from anywhere in the house Electronic ignition (220 v) with ionization flame sensor and consequent gas savings of up to 25% Maximum efficiency > 90% Modulation ratio 1:6 Automatic flow regulator with stepping motor Electronic thermostatic modulation for precise temperature control Minimum activation pressure at 0.1 bar Standard antifreeze function: up to -20° Cascade solution up to 5 products (only with models 20 and 24) Integration with solar thermal via thermostatic valve Small size Absolute safety thanks to the IPX5D electrical protection Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Heat pump water heater Ariston Nuos Primo 100 class A code 3623239 accumulation 100 liters Technical features Product code: 3623239 Energy label specifications according to the European ErP directive Energy efficiency: Class A Load profile: M profile Characteristics of heating/DHW operation: COP* 2.17 Heating time* h:min 6:36 Min/max air temperature °C 10/40 Max water temperature heat pump only/with R °C 55/75 Sound power *** dB(A) 54 Average absorbed electrical power W 250 Nominal accumulation capacity l 100 Maximum working pressure bar 8 Maximum absorbed voltage/power V/W 220-240/1550 Resistance power W 1200 Standard air flow m3/h 170 Minimum volume of the installation room** m3 20 Empty weight kg 49 IP24 electrical protection Insulation thickness mm 31 Diameter of water connections " 1/2M Minimum storage room temperature °C 1 Thermal dispersions (Pes)* W 20 Available static pressure Pa 65 Annual energy consumption (average climate)* kWh/year 567 Seasonal yield* % 91 V40 (quantity of water mixed at 40°C)* l 117 New Primo  An advanced efficient and sustainable solution. It uses the heat from the air as a renewable energy source to obtain the greatest comfort and savings. Working range in heat pump with air temperatures from 10 to 40°C Ambient air product Ecological gas R134a allows to reach water temperatures up to 55°C in heat pump Condenser wrapped around the boiler (not immersed in water) Titanium enamelled steel boiler Supplementary electrical resistance Magnesium anti-corrosion anode LED displays Functions: green, boost, auto, hourly programming of withdrawals and anti-legionella Product for internal installation Excellent for a family of 3-5 Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Electric Water Heater Ariston Over Sink Andris Lux Eco 30/5 EU 5 Years Warranty 30 lt 3100353 Technical Features Capacity 30 litres Net weight 10.4 Kg Max operating pressure bar 8 Power 1.5 Kw Voltage V 220 Heating time ∆T45°C h/min 1,10 Energy class A S sampling profile Code 3100353 Over Sink Installation 5 year warranty Andris Lux Eco Electric Water Heater Models and versions: Over-sink - 10, 15 and 30 litres. Under-sink - 10. Andris Lux Eco is the electric water heater compliant with the new Erp regulation. Innovative design and compact shape, suitable for small liters. The magnesium anode is enlarged, particularly large, easy to inspect or replace, to make the electrochemical protection of the boiler constantly effective. Characteristics: Energy savings up to 15% ABS Safety and Hygiene Package Elegant Black Front Panel Smart and intuitive display with controllable and adjustable temperature via LED. Electronic thermostat for precise temperature regulation. Extend the Long Life assistance program from 5 to 7 years for free via the official Ariston website. Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

Ariston Lydos Hybrid 100 EU Electric Heat Pump Water Heater with hybrid technology Product code: 3629052 Energy label specifications according to the European ErP directive Energy efficiency: Class A Load profile: M profile Characteristics of heating/DHW operation: Capacity l 100 Power kW 1.2 Average absorbed electrical power kW 0.19 Electric power absorbed max kW 1,42 Voltage V 220-240 i-Memory heating time (ΔT=43°C) h,min 7.03 Boost heating time (ΔT=43°C) h,min 3.13 Green heating time (ΔT=43°C) h,min 12.18 Maximum working pressure 8.0 bar Min/max air temperature °C 12/40 Sound power 49 dB Height 1153mm Weight kg 37.5 IP protection X4 Lydos Hybrid   Hybrid Intelligence. The innovative i-Memory software learns your habits to efficiently manage hybrid technology, choosing the most convenient option between using energy from the heat pump and electricity. After an initial learning phase, the i-Memory is able to program the water temperature every hour, so as to meet the user's needs while saving time and energy. Superior Performance. Thanks to Hybrid Intelligence and i-Memory, hot water is always available when needed. The BOOST function speeds up the production of hot water and the Shower Ready icon notifies you when the first shower is ready. Simple installation . Designed to be as easy to install as any electric water heater No additional work is required thanks to compatibility with the supports and water connections of standard Ariston electric water heaters The hydraulic connections are completely hidden inside the product itself Italian style and intuitive design thanks to the advanced hi-tech interface.  Thanks to the combination of innovative technologies, Ariston has created the first medium-capacity electric water heater able to reach such high levels of efficiency as to be included in energy class A. Efficiency means greater economic savings, comfort and lower carbon dioxide emissions. Functions: i-MEMORY: Chooses the best compromise between comfort and efficiency based on user habits. The temperature and the amount of hot water are set on the basis of the energy consumption in the last four weeks. Managing the operation of the heating element and the heat pump is therefore an improvement process. Green Achieves maximum efficiency using 100% of the heat pump. The maximum temperature that can be reached is 53°C and cannot be increased. The electric resistance is activated only with Anti-legionella, or in the event of a malfunction of the heat pump. boost Temporarily increases the electric power of the product, in case of need for hot water within a short time. The resistance and the heat pump work together up to 53°C, after which the temperature is regulated only by the resistance. When the desired temperature is reached, the Boost function deactivates. Program Desired time and temperature program to optimize consumption thanks to hybrid technology. Allows the user to choose two different temperatures at two different times. Operation is in heat pump or, if necessary, in resistance. Lydos Hybrid At a Glance: First electric water heater with class A hybrid technology 50% savings compared to a class B water heater i-Memory, Program, Green and Boost function Active anode + magnesium Enamelled resistance in Incoloy nickel alloy for anti-noise and anti-corrosion Replacement of old water heaters Ease of installation Hidden hydraulic connections Condensate collection tray available as an accessory

Read more less