IN THE ABSENCE OF THE PRODUCT THE NEW CARES S 30 MODEL WILL BE SHIPPED CARES PREMIUM 30 EU ErP METHANE condensing BOILER COMPLETE WITH FUME EXHAUST KIT Product code: 3300760 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Withdrawal profile: XL Characteristics of heating/DHW operation: Nominal heat input in heating: Kw 28 Nominal heat input in sanitary max: Kw 28 Useful thermal power in heating: max: Kw 28.4 Efficiency at nominal heat input (60/80°C): 97.8% Efficiency at nominal heat input (30/50°C): 104% Efficiency at 30% at 30°C: 108% Max/min heating temperature (high temperatures): 82/35°C Max/min heating temperature (low temp.): 45/25°C Max/min DHW temperature: 60/36 °C Sanitary water production (DT=25°C): lt./min. 16.3 Specific flow rate (first 10' with DT=30°C): lt./min. 11.6 Total absorbed electric power W 82 Degrees of protection of the electrical system IP X5D Dimensions (HxWxD) mm 745 x 400 x 319 Power supply: METHANE ARISTON CARES PREMIUM 30 EU CONDENSING BOILER - NEW ErP Technical features Product code: 3300760 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Withdrawal profile: XL Characteristics of heating/DHW operation: Nominal heat input in heating: Kw 28 Nominal heat input in sanitary max: Kw 28 Useful thermal power in heating: max: Kw 28.4 Efficiency at nominal heat input (60/80°C): 97.8% Efficiency at nominal heat input (30/50°C): 104% Efficiency at 30% at 30°C: 108% Max/min heating temperature (high temperatures): 82/35°C Max/min heating temperature (low temp.): 45/25°C Max/min DHW temperature: 60/36 °C Sanitary water production (DT=25°C): lt./min. 16.3 Specific flow rate (first 10' with DT=30°C): lt./min. 11.6 Total absorbed electric power W 82 Degrees of protection of the electrical system IP X5D Dimensions (HxWxD) mm 745 x 400 x 319 Power supply: METHANE CARES PREMIUM EU The CARES Premium wall-mounted boiler combines condensing technology with practical installation and compact dimensions. Cares Premium is available in the heating and domestic hot water production versions with powers of 24 and 30 kW Characteristics: LCD displays Continuous modulation high efficiency circulator Modulation ratio 1:4 Arrangement for integration with system configuration through the new Bus Bridgenet® communication protocol Arrangement for multi-zone and multi-temperature thermoregulation (with Sensys) Arrangement for solar system management Aluminum alloy primary exchanger Sanitary plate heat exchanger Self-diagnosis system by code Cold water inlet and heating return filters Anti-freeze, anti-limescale and anti-blocking circulator protection Operation only with METHANE gas Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

CHAFFOTEAUX PIGMA GREEN BOILER IN Ebus2 25 EU Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency Class A Withdrawal profile: XL Characteristics of heating/DHW operation: Nominal heat input in heating max/min (Hi) Qn : 22/5.5 kW Useful heat output 80/60°C in heating/DHW max/min: 21.5/5.4 kW Nominal heat input in DHW (60/80°C) max/min: 26/5.5 kW Efficiency at nominal heat input: 97.5% Efficiency at 30% of the nominal heat input: 109% EN13203 sanitary comfort performance stars: *** Energy efficiency stars: (dir 92/42/EEC) **** Expansion vessel capacity: 8 l Port. specific in healthcare (10 min. with ΔT= 30°C): 12.2 l/min Minimum withdrawal: <2 l/min Total absorbed electric power: 78 W Electrical system protection degrees: IP X5D Boiler dimensions hxwxd: mm 771x502x238 ; 30kg Built-in dimensions hxwxd: mm 1140x590x240 LPG power supply PIGMA GREEN IN Ebus2 EU It is the built-in condensing boiler, with very small dimensions, designed to guarantee exceptional sanitary comfort and high heating performance while respecting the environment and reducing consumption to a minimum. The built-in unit in sheet metal and the wide range of accessories allow simple and totally concealed installation. Designed to also manage systems with solar integration or with different heating needs in different zones, Pigma Green in Ebus 2 allows you to control the entire system using the Expert Control system manager supplied as standard. Sanitary comfort Increased plate heat exchanger in stainless steel. 3 stars for sanitary comfort, the maximum required by the EN 13203 standard. 12 l/min (ΔT= 30°C) of domestic hot water flow rate, measured in compliance with the EN 625 standard. DHW circuit managed by four probes and a flowmeter, to eliminate waiting times and have a constant temperature, even in the case of small withdrawals. Perfectly integrable with thermal solar systems, forced and natural circulation Daily and weekly hourly programming of the DHW exchanger pre-heating periods directly from the Expert Control system manager. Heating comfort Efficiency up to 109% with energy savings up to 35%. 4-star combustion efficiency according to EN 92/42 standard. Automatic regulation system, which can be activated directly from the Remote Control, to obtain the best operating regime in heating in all environmental conditions. Useful thermal power up to 23.5 kW. Modulation ratio 1:5. Reduced polluting emissions, NOx class 5. Heating circuit pressure sensor with display on Expert Control. Modulating circulator to improve acoustic comfort and reduce electricity consumption. Differentiated climatic thermoregulation of 3 circuits, according to the ambient and external temperature. Operation management and programming using the Expert Control system manager: operating modes and temperatures, self-diagnosis, daily and weekly programming, adjustment information and history of the latest faults. Comfort of use and installation Semi-automatic filling that can be activated by the Expert Control system manager. Expert Control system manager and external probe as standard. Adjustment of the operating parameters directly to the Expert Control system manager. Prepared for the control of system management modules up to 3 circuits at different temperatures. Prepared for the management and integration of thermal solar systems (standard solar probe). IPX5D electrical protection degree and guaranteed operation up to -15°C **. Easy commissioning: automatic de-aeration function and combustion regulation with direct access. Mechanical pressure gauge and filling cock to allow maintenance even without electricity. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Heating energy class: A DHW energy class (domestic hot water): A (ErP) Nominal heat output: 23 kW Nominal heat input: 24.6 kW Sanitary nominal thermal power: 28 kW Useful thermal efficiency at nominal power 40/30 °C: 101% Useful thermal efficiency at 30% nominal load 40/30 °C: 109% Continuous sanitary production: 14.1 l/min Sanitary temperature range that can be set: 40/60°C Forced draft sealed chamber Declared load profile XL NOx class: 5 Degree of protection: IP X4D Gas: LPG General characteristics The new Beretta CerepurHM has an easy-to-use LCD display that can also be programmed comfortably from your smartphone by downloading the JunkersHome App from any system. It works through the 1.8 mod, giving comfort with low consumption. Delivered for outdoor installation, in a fairly protected place, in compliance with current legislation. Functions: Can be combined with solar thermal systems for DHW using the Solar Kit; Can be combined with solar thermal systems for heating and DHW integration; Suitable with Ø 60 mm drains. SolarInside-ControlUnit: solar optimization on/off; Modulating premix fan and burner; High efficiency primary heat exchanger, in aluminum and silicon alloy; Sanitary heat exchanger to condense also in DHW with increased plates; Heating side expansion vessel of 12 litres; Heating side filling tap; Can be combined with CR 100 or CW thermoregulators Modulating digital thermoregulator, with soft touch display that can be installed on the wall, with an elegant and refined design, managed by a smart and functional app; Dimensions (WxLxH): 350 x 440 x 840mm; 43kg

Read more less

Technical features Model : Genus One 35 Product code : 3301020 Energy efficiency Energy class: A Sanitary energy class: A Load profile : XL Combustion Maximum useful thermal power in heating: 3.3 kW Minimum useful thermal power in heating: 3.3 kW Minimum nominal heat input in heating: 3.5 kW Maximum nominal heat input in heating: 3.10 kW Minimum nominal heat input in DHW: 3.5 kW Maximum nominal heat input in DHW: 34.5 kW Yield Efficiency at nominal heat input (60/80°C): 97.7% Efficiency at nominal heat input (30/50°C): 108.0% Efficiency at 30% (30°C) : 109.5% Performance Minimum temperature in high temperature heating : 35°C Maximum temperature in high temperature heating: 82°C Minimum temperature in low temperature heating: 20°C Maximum temperature in low temperature heating: 20°C Minimum temperature in domestic hot water: 36°C Maximum temperature in domestic hot water: 36°C Quantity of hot water (25°C): 19.8 l/min Quantity of hot water (35°C): 14.1 l/min Specific flow rate : 16.5 l/min Electrical data Power (V/Hz/Φ) : 220~240/50/1 Absorbed electrical power: 82.0 W Electrical system protection degree: IPX5D Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Heating and DHW energy efficiency class: Class A Nominal heat output: 34.0 kW Nominal heat input: 34.8 kW Sanitary nominal thermal power: 34.8 kW Sanitary flow rate ΔT = 30 K / Specific flow rate sec. EN 625: 16.7 / 15.3 l/min Sanitary temperature range that can be set: 40-60 °C NOx class: 5 Degree of protection: IP X4D Characteristics With expansion vessel, 3-way valve and circulator. Suitable for use with Ø 60 mm drains. Bosch Heatronic 3®, BUS system. Compatible with solar thermal systems for DHW. Patented active and passive solar optimization algorithm SolarInside-ControlUnit Possibility of electrically connecting an additional circulator. Continuous power modulation (DHW and heating). Modulating circulator. Heating side expansion vessel 12 liters (ZWBR and ZSBR). Patented high efficiency primary heat exchanger in aluminum and silicon alloy. Heating side filling cock. Dimensions Dimensions (HxWxD): 850x440x850 mm Weight: 50Kg

Read more less

CHAFFOTEAUX INOA GREEN Ebus2 24 EU CONDENSING BOILER Product code: 3310477 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency Class A Withdrawal profile: XL Characteristics of heating/DHW operation: Nominal heat input in heating max/min (Hi): 23.5/4.5 kW Max/min DHW nominal heat input (Hi): 23.5/4.5 kW Max/min heating thermal power (80°C-60°C): 23/4.4 kW DHW max/min thermal power: 22.9/4.4 kW Efficiency at nominal heat input: 97.7% Efficiency at 30% of the nominal heat input: 106.2% Energy efficiency stars: (dir 92/42/EEC) **** Expansion vessel capacity: 8 l Sanitary comfort stars (EN13203): ** Port. specific in healthcare (10 min. with ΔT= 30°C): 10.3 l/min Hot water flow rate at ∆T 25º C: 13.9 l/min Electrical system protection degree: IPX5D Extremely compact dimensions hxwxd: mm 745x400x315 ; 24kg METHANE power supply INOA GREEN Ebus2 EU The new compact condensing boiler with aluminum alloy condensing exchanger and with all the necessary requirements to achieve the required standards in terms of energy saving. Operation only methane. Sanitary comfort Sanitary heat exchanger in stainless steel. Domestic water performance: stars **. Flow rate 13.1 litres/minute with ΔT = 25ºC. (24kW) Heating comfort Efficiency up to 108% with energy savings up to 35%. 4-star combustion efficiency in compliance with the EN92/42 standard. Modulation range from 25% to 100% of maximum power. Condensing exchanger in aluminum alloy. Reduced polluting emissions, NOx class 5. High efficiency circulator with continuous modulation to improve acoustic comfort and reduce energy consumption. Arrangement for integration into a heating system via Ebus 2 communication protocol (boilers, solar, system management modules and modulating thermoregulation accessories). Possibility of managing single-temperature and multi-temperature zones only via Expert Control. Self-diagnosis system by code. LCD display. Comfort of use and installation Possibility of connection with external probe. Compatible with Expert Control, modulating accessories and on/ff. Easier starting: automatic purge function and directly accessible combustion regulation. Energy saving and respect for the environment Up to 20% energy savings in combination with chronothermostat and external probe. 40% reduction in CO 2 emissions **. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months

Read more less

Biasi BASICA COND 25s condensing boiler complete with LPG Low NOx ErP Fume Exhaust Kit - NEW Model BASICA COND 25S DHW nominal heat input kW (kcal/h) 26.0 (22356) Nominal heat input * heating kW (kcal/h) 21.0 Maximum useful power in heating 60/80° kW (kcal/h) 20.5 (17627) Useful power in domestic hot water 60/80° kW (kcal/h) ) 25.4 (21840) Efficiency at 100% load (50/30 °C) % 106.8 Sanitary flow rate ∆t =25°K l/min 14.7 NOx class 6 GPL code10302.2043.0 Dimensions HxWxD mm 700x400x325 BASIC COND Basica Cond Basica Cond completes the BIASI range with premixed condensing: perfect for radiator systems and suitable for radiant systems with mixing groups. Basica is the compact condensing boiler that ensures high efficiency, low consumption and respect for the environment. Available for heating and domestic hot water production, in power ratings of 25 and 30 kW. Main features Primary condensing exchanger in stainless steel with steel lining to offer maximum resistance to corrosion - Total premix burner, stainless steel (Class NOx 6) - Modulation 1:5 CNG and also LPG - Sanitary plate heat exchanger in stainless steel - 8 liter expansion tank - High efficiency pump with low energy consumption - Can be installed in a partially protected place - Integration with BIASI solar systems, using a solar kit - Analog pressure reading - Arrangement for remote control and external probe High circulation single coil primary heat exchanger Biasi introduces on the market the new stainless steel heat exchanger for condensing boilers: Round. Round is a compact monothermal heat exchanger based on a stainless steel coil with an oval section. The heat exchanger consists of a combustion chamber, condensing area and an insulated metal disc protected with silicone ceramic fiber which separates the two areas. By using a single strip of stainless steel to produce the coil, including inlet/outlet fittings, the following benefits are achieved: - The accumulation of dirt and debris is avoided - The water flow rate is constant, guaranteeing a higher average life of the product - Reduction of load losses with optimized circuit. The ease of cleaning and the sturdiness of this exchanger are one of the main strengths of the product since it can be used on new systems but also on old systems in the event of renovations. Round integrates the round flow function in which the water produces a centrifugal cleaning effect on the internal walls of the single coil. The absence of circuits in parallel guarantees an easy "washing" operation of the exchanger and the elimination of any air present in the system circuit. Included in delivery Boiler support bracket and paper template Boiler power cable Condensate collection siphon Quick instruction to the user. Control panel Summer/winter/off selector Heating temperature regulator DHW temperature regulator Analog pressure reading DHW and heating temperature visualization from the display Display of fault diagnostics, block status and fault history The display operates in the following modes : INFO – information available on the operating status and error history FREE programming – programmable parameters for generator/system adjustment and User SET INSTALLER programming - generator parameters ASSISTANCE programming - Authorized Assistance Center parameters commands The Basica Cond Range has the choice of 2 class V remote controls (they allow deduction at 65), in the Base and Top version with weekly chronothermostat functions with up to 4 programmable periods with independent temperatures, in addition to the remote control of all the information of the boiler display. Product Guarantee: All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

Technical Features Model : Full Condens EKOMB 22 Nominal Thermal Power: 22 kW Power supply: Methane Heating Seasonal efficiency: 93% Energy efficiency class: A Rated power : 5.4 ~ 17.8 kW Maximum power consumption: 80 W Domestic Hot Water Efficiency in ACS production: 84% Energy efficiency class: A (XL) Nominal heat input: 5.6 ~ 22.1 kW Seasonal efficiency: 89.2% Continuous service withdrawal (ΔT = 30°C): 10 l/min Continuous service withdrawal (ΔT = 25°C): 12 l/min Minimum withdrawal: 1.5 l/min Maximum power consumption: 55 W Electrical Data Emission class: NOx 5 Power absorbed by the circulator: 25 W Minimum power consumption: 2 W Dimensions and Weight Dimensions (LxHxD): 770x517x590 mm Weight: 30 Kg Simply Peace of Mind Guarantee To guarantee you maximum peace of mind, DAIKIN has designed “SEMPLICEMENTE SERENI”, an extension of the warranty up to the 5th year of your product's life, which includes the subscription to a Scheduled Maintenance Plan with specialized Daikin technicians. Daikin Full Condens Boiler Condensing boiler gas double condensing for heating and domestic hot water Why choose a condensing boiler? Daikin condensing boilers are a good solution for those who want to replace an existing boiler with a more efficient alternative, saving on costs. Our portfolio includes boilers for every need, from the wall-mounted D2C and Full condens and Full Condens TOP boilers, to the boiler with built-in GCU heat storage tank, to the floor-standing A2 diesel boiler. The new condensing boilers offer the advantages of condensation not only in heating but also in the production of domestic hot water. The heart of the condensing boilers is the innovative double-circuit aluminum exchanger: the mains water is heated directly in the boiler body, causing the combustion fumes to condense. Domestic hot water is produced with up to 20% greater efficiency than traditional condensing boilers. The higher the efficiency, the lower the consumption and the higher the savings! Comfort Daikin condensing boilers offer maximum comfort. They work optimally and reliably continuously, all year round, even in extreme weather conditions. For the production of domestic hot water, there are both Combi models, for instantaneous production, and models for combination with domestic hot water tanks or Daikin Sanicube thermal buffer tanks. A solution for every need! Energy efficiency Condensing technology This is a technology that exploits the latent heat present in the combustion gas and allows for high efficiencies to be achieved. The Benefits of the Simply Peace of Mind Guarantee Labor at no additional cost Free original spare parts Daikin Repair Warranty no extra costs for requests for intervention in the event of a fault under warranty The advantages of condensation in heating and domestic hot water production › Minimum operating costs thanks to the double circuit exchanger for condensation even in the production of domestic hot water › Easy, quick and space-saving installation thanks to the optional pre-assembled B-pack unit, containing all the auxiliary components Ease of installation and maintenance All components are accessible from the front and maintenance is reduced thanks to the adaptive gas combustion system Lambda Gx, a fully electronic gas-air combination. The Lambda Gx system is compatible with wall and floor units. Minimal maintenance Thanks to the innovative double-circuit aluminum exchanger, neither the plate exchanger nor the 3-way valve used by traditional condensing boilers are required for the production of domestic hot water. A smaller number of components translates into greater reliability and less and faster maintenance. Simplicity is its strength! Furthermore, having its own completely independent separate circuit, the production of domestic hot water is not interrupted in the event of failures in the heating circuit Simple, reliable and efficient Copper pipe dedicated to domestic hot water service Copper pipe dedicated to heating service Air-fume heat exchanger in aluminum in which copper pipes are drowned Condensation during ACS service point efficiency up to 101.7% and 20% more efficient than a traditional condensing boiler on an annual basis. Better performance, lower consumption and greater savings Absence of 3-way valve and plate exchanger greater reliability and less maintenance. Everything that is not there cannot break ACS service independent from the heating circuit hot water always available, even for example in the event of a water circulator breakdown Circulator active only during heating It consumes only 55W of electricity during the production of domestic hot water and extends the life of the water circulator Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Code : 20095435 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Seasonal heating efficiency % 93 Characteristics of heating/DHW operation: Heating/DHW nominal heat input: 25/29 kW Nominal heating thermal power: 24.45 kW Efficiency at rated power: 97.8% Efficiency at reduced load (30%): 102% Max electric power heating Watt 78 Electrical protection degree IP X5D Expansion tank capacity 8 litres Quantity of hot water with Δt=25°C: 17 l/min Minimum domestic water flow rate: 2 l/min Dimensions (hxlxp) mm 715x405x248 ; 29kg METHANE power supply Legend: C (heating + sanitary water) S (sealed chamber) I (electronic ignition, ionisation control). Exclusive services: Beretta offers 5 years of peace of mind thanks to the Kasko warranty extension formulas. To view more product information CLICK HERE General characteristics HELLO GREEN ErP Ciao Green: high energy efficiency, low gas consumption and low emissions. The entry into force of the European ErP Directive (26.09.2015) provides that even generators for the production of heating and domestic hot water are classified through the appropriate energy label indicating the class. Mandatory labeling provides greater transparency on the characteristics of products that can be easily compared, helping the user to find those with greater efficiency. Consequently, even with boilers it will be easier to contribute to the achievement of the "20-20-20" objective set for the year 2020 which consists of: reducing greenhouse gas emissions (CO2) by 20%, increasing by 20% the use of renewable energies and reduce energy consumption by 20% in EU countries. Condensing exchanger The innovative Beretta compact aluminum condensing exchanger is assembled with a brazing production process in a controlled atmosphere. In addition to allowing a more uniform distribution of heat, aluminum offers a high resistance to corrosion for the benefit of a longer duration over time. Aluminum is also chosen for its lightness, excellent conductivity, mechanical resistance, reliability and recyclability. The condensing exchanger makes it possible to recover a large part of the heat from the fumes by reducing losses in the chimney, and a large part of the latent heat, reaching a four-star energy efficiency value (according to European Directive EEC 92/42). The premix burner optimizes the combustion mixture by reducing NOx emissions to values ​​that place the boiler in Class 5, the highest according to the European Directive EN 677. Universal installation Ciao Green is designed to be installed outdoors in partially protected places or recessed thanks to the dedicated accessories and board anti-freeze protection down to 0 °C. In colder temperatures it is possible to extend the protection down to -10 °C using the special antifreeze heater kit together with the siphon antifreeze heater kit. If the boiler is installed outside, without embedding, the lower cover is required for greater protection. The management The electronic panel is the brain of boiler management. Simple and intuitive, it allows you to adjust the boiler parameters and activate the numerous functions. A liquid crystal display and LEDs provide information on the status of the device and the diagnostic codes. By turning the knobs, the heating water and domestic hot water temperature can be set easily and intuitively. The panel integrates the Sistema Clima Amico function. Characteristics: ErP boilers with synchronous modulating pump with low energy consumption (EEI≤0.20) Designed according to the ecodesign indications provided for by the European ErP Directive Energy Class > heating (class A) > DHW profile XL (class A) Seasonal heating efficiency 93% Aluminum condensing exchanger, two versions of 25 kW and 29 kW combined and one 25 kW heating only Designed following the ecodesign indications of the European ErP Directive Class 5 according to the UNI EN 483 European Standard It can also be installed externally and recessed through the adoption of special kits (optional) Display for viewing temperature and diagnostic codes IPX5D electrical protection degree Prepared for connection to the remote control (optional) Standard thermoregulation (optional external probe) Plumbing fittings, gas and sanitary taps (optional) Antifreeze kit available up to -10°C (optional) Beretta is “ERP”. The concrete commitment towards an eco-sustainable future The acronym ErP, acronym of "Energy related Products" (Products connected to the use of energy), identifies the Directive 2009/125/EC aimed at reducing the energy consumption of products through eco-compatible design. Starting from 26 September 2015 , the date of its effective entry into force in the European Union, it will mark an epochal turning point for heating products and the production of domestic hot water. On that date, other regulations issued at the same time for the energy labeling of products to supplement the corresponding Directive 2010/30/EU will also become effective. The regulation provides that all products intended for heating and for the production of domestic hot water with a nominal thermal power lower than or equal to 70 kW can only be placed on the market with an energy label that highlights the efficiency class * . Different energy efficiency labels have been provided based on the different types of appliances/technologies, but all have the same graduated color scale that identifies the various levels of efficiency at a glance. The purpose of the labels is to give the consumer the possibility to easily identify the level of efficiency of a product and to be able to make a homogeneous comparison between products that use different technologies. For products whose transformation efficiency is influenced by external conditions, such as heat pumps, the efficiency data is reported by climatic bands. In addition to the product labels, the European regulation has provided for the creation of a system label in case systems are created with different appliances, components and related controls. This second type of labeling, thanks to the virtuous synergy between the different elements, will make it possible to create systems capable of reaching levels of efficiency even higher than those of the individual devices. Also starting from the same date, new seasonal efficiency limits will be triggered for products intended for heating and combined. These for products with nominal thermal power equal to or less than 400kW, will prevent less efficient products from being placed on the market. The obligation to comply with minimum heat loss limits will also apply to DHW tanks. For primary water tanks, these will be subject to compliance with an energy classification based on heat dispersion. For sanitary accumulations, up to 500 liters there will be a labeling obligation, from 500 to 2000 liters will be bound to compliance with the energy classification. For heat pumps for heating and mixed appliances, in addition to the seasonal efficiency limits, there will be specific noise emission limits for power sizes. Even water heaters, whether gas, heat pump or solar, in order to be placed on the market, in addition to energy labelling, will have to comply with a series of requirements in terms of efficiency. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Biasi c low NOx outdoor condensing boiler complete with flue gas exhaust kit - New NB: PRODUCT AVAILABLE IN 6-8 WEEKS Heating / DHW nominal heat input kW 21.0 / 26.0 Yield name 60°/80°C * % 96.6 NOx class n° 6 Minimum / maximum heating pressure bar 3.0 / 0.3 Expansion tank capacity (total / useful) l 7.0 / 3.5 Maximum flow rate (ΔT=25 K) / (ΔT=35 K) l/min 14.4 / 10.3 Voltage / Power at nominal heat input V~/ W 230/99 Degree of protection n° IPX5D Height x Width x Depth mm 946x509x287; 30.7 kW Performance Stars **** ARTICA PLUS Artica Plus is the new BIASI range of wall-mounted condensing boilers for outdoor use : excellent performance thanks to the new heat exchanger and ease of use thanks to the digital control panel with display. In the version for heating and domestic hot water production Artica Plus is available in two powers, 20 and 30 kW, in the same extremely compact dimensions (946 x 509 x 287 mm). Artica Plus has its strong point in the innovative heat exchanger designed to provide high yields that last over time. Digital control panel, designed to communicate with the user easily and conveniently thanks to the remote control plus supplied as standard. Like the entire BIASI condensing range, Artica Plus allows you to obtain maximum savings from climatic thermoregulation, based on the system in which the boiler is installed. Main features High yields (★★★★ compliant with yield directive 92/42 EEC and Legislative Decree 311/06) Sanitary comfort (★★★ EN 13203) Primary condensing exchanger in stainless steel with steel lining to offer maximum resistance to corrosion Total premix burner, built in stainless steel (Class NOx 6) Modulation 1:5 CNG and also LPG Sanitary plate heat exchanger in stainless steel 7 l expansion tank for mod. 25S and 10 l for mod. 35S Maximum power adjustable according to the system High efficiency pump with low energy consumption Degree of protection IPX5D Can be installed in a partially protected place Closing the covers by means of magnets makes system loading operations and access to the gas cock immediate Digital control panel with backlit display Analog reading of the pressure on the machine, digital on the remote Automatic filling via remote Remote control plus as standard Standard external probe. High circulation single coil primary heat exchanger Biasi introduces on the market the new stainless steel heat exchanger for condensing boilers: Round. Round is a compact monothermal heat exchanger based on a stainless steel coil with an oval section. The heat exchanger consists of a combustion chamber, condensing area and an insulated metal disc protected with silicone ceramic fiber which separates the two areas. By using a single strip of stainless steel to produce the coil, including inlet/outlet fittings, the following benefits are achieved: Accumulation of dirt and debris is avoided The water flow is uniformly distributed and guarantees a homogeneous heat exchange The water flow is constant for a longer life of the product Reduction of pressure drops with optimized circuit. The ease of cleaning and the robustness of this exchanger are one of the main strengths of the product since it can be used on new systems but also on old systems in the event of renovations. Round integrates the round flow function in which the water produces a centrifugal cleaning effect on the internal walls of the single coil. The absence of circuits in parallel guarantees an easy "washing" operation of the exchanger and the elimination of any air present in the system circuit. Control panel Summer/winter/off selector Heating temperature regulator DHW temperature regulator Analog pressure reading DHW and heating temperature visualization from the display Display of fault diagnostics, block status and fault history Recommended fill display and fill guide View annual maintenance expiry The display operates according to the modes: 1. INFO. Info mode displays the following information: - External temperature (in case of external probe connected) - K value (in case of external probe connected) - Sanitary / heating temperatures chosen by the user - Smoke temperatures 2. PROGRAMMING. The programming mode allows you to change the boiler parameters. - In chimney sweep mode it is possible to test the boiler and adjust the gas valve. Thermoregulation By connecting the external probe (standard) and the remote control plus (standard) directly to the boiler, climatic regulation can be used. Artica Plus will adapt the system water temperature to the external climatic conditions, ensuring that the desired room temperature is reached without waste and optimizing consumption. By using the climatic regulation, the regulation efficiency is also raised, giving greater value to your home. Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

BUILT-IN UNIT EXCLUDED! Technical Features ErP energy efficiency class (heating and DHW): A Load profile: XL Nominal heat output 24.7 kW Nominal thermal power 24 kW Energy efficiency (92/42/EEC) **** Nominal efficiency 80/60°C % 97.7 Yield at 30% % 108.8 Heating circuit water temperature regulation °C 25-80 Sanitary water temperature regulation °C 35-60 Sanitary water production ∆T 25°C l/min 13.8 Minimum flow rate of sanitary water: 2 l/min Minimum operating temperature: -15°C Expansion vessel capacity/pre-charge l/bar: 8/0.8 NOx class (EN 483): 5 Dimensions (hxwxd) - with case: mm 1170 x 600 x 245 Dimensions (hxwxd) - boiler mm 770 x 470 x 238; 32.5 kg Power supply: LPG Luna Duo-Tec IN+ The efficiency of compact built-in comfort Baxi has always offered the ideal system solution for any type of home: for this reason the Duo-tec+ range is expanding with built-in and outdoor installation models. Luna Duo-tec IN+ is the built-in condensing boiler, specifically designed to make it suitable for replacing an old built-in generator but also for new installations. The extremely compact size of the boiler makes it suitable for installation in small/medium-sized apartments, and in general in all housing units where efficient space management is an important objective (for example in technical rooms or in the presence of containment boxes) Outdoor recessed installation Luna Duo-tec IN+ is the built-in condensing boiler, specifically designed to make it suitable for replacing an old built-in generator but also for new installations. The extremely compact size of the boiler makes it easy to install in small/medium-sized apartments, and in general in all housing units where efficient space management is an important objective (for example in technical rooms or in the presence of containment boxes). Inside the packaging there are the bracket and installation fittings for inserting the boiler into the containment box Characteristics: Wide modulation range up to 1:7 greater efficiency and silence GAC (gas adaptive control): automatic combustion control Automatic plant loading system Minimum operating temperature: -15°C Remote digital control panel with LCD display Predisposition for combination with the Baxi integrated solar system High efficiency circulation pump with total modulation Ultra-compact dimensions: 770x470x238 mm (boiler) STANDARD installation kit (gas tap / gas inlet / telescopic fittings) Anti-freeze function and IPX5D protection degree Digital control panel The Duo-tec+ boiler range is equipped with a digital control panel with a backlit LCD display, easy to use thanks to dedicated and independent keys to adjust the temperature of the domestic hot water and heating. The display allows you to view all the information and set the operating parameters clearly and immediately. Adaptive Gas Control The innovative automatic combustion control system GAC ( Gas Adaptive Control ) guarantees a wide modulation range of up to 1:10: high efficiency and energy savings are ensured as the boiler is able to adapt the thermal power produced to the actual power dissipated by the building, avoiding excessive overheating/cooling of the building. Antifreeze function The boilers have been designed to allow the boiler to operate down to -15°C. Furthermore, the anti-freeze function provides for the automatic ignition of the burner, avoiding freezing phenomena. Wide modulation range 1:7 greater efficiency given by fewer on-off cycles: with a high modulation ratio, the reduction of continuous on/off cycles leads to a significant reduction in consumption (8-10%) and an equal reduction in polluting emissions adjustment of the thermal power produced to the dissipated power, thus avoiding excessive overheating/cooling of the rooms Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

Vaillant ecoTEC Exclusive VM 296/7-5+ Condensing Boiler Natural Gas Heating Only with ErP Ready Fume Exhaust Kit Technical features CNG item code: 0010017088 Heating Efficiency Class: A Nominal Thermal Power (80/60°C): 29.7 kW Nominal Thermal Power (60/40°C): 30.6 kW Nominal Thermal Power (50/30°C): 32.0 kW Nominal Thermal Power (40/30°C): 32.1 kW Nominal Thermal Power in Sanitary: 28 kW Nominal heat capacity in sanitary water: 28.6 kW Nominal heat input in heating: 30.3 kW Nominal efficiency (80/60°C) : 98% Efficiency at 30% : 108.5% Performance Stars : **** Inlet Gas Pressure: 37 mbar Consumption at Nominal Power : 3 m 3 /h Class : NOx 5 Nominal flow rate in Heating (ΔT=20K) : 1075 l/h Inbound Adjustment Temperature: 35-75 °C Water Content in the Generator : 2,2 l Power supply (V/Hz): 230/50 Total Electric Power: 81 W Stand-By Electric Power: <2 Gas connection: 20 mm Smoke Exhaust Fitting: 60/100 mm Sound Power : 50 dB(A) Degrees of Protection : IP X4 D Dimensions and weight Boiler dimensions (HxPxL): 720x338x440 Boiler weight: 35 Kg ecoTEC Exclusive VM+ All the comfort you are looking for with maximum efficiency and reliability The ecoTEC exclusive WM + wall-mounted condensing boiler has been designed to guarantee minimum harmful emissions into the environment, guaranteeing maximum performance for domestic comfort . This model of indoor boiler allows a lower consumption of gas and electricity thanks to the high quality components mounted inside such as the high efficiency pump which allows a wide modulation range. Furthermore, the ecoTEC exclusive adjusts itself automatically to provide the best comfort by making the most of the principle of condensation. The boiler internally mounts a gateway which, in combination with the multiMATIC 700 control unit (accessory that can be ordered separately, not included in the supply, mandatory for connectivity), can be interfaced with the home router with a LAN cable or a Wi-Fi transmission dongle ( can be ordered separately); through a free app developed by Vaillant it will be possible to regulate the boiler comfortably from a smartphone . This boiler model is for the production of heating only , but if combined with a Vaillant boiler it can also supply domestic hot water. ecoTEC Exlusive is the Green iQ branded condensing boiler. The boiler reaches 94% (Etas) of energy efficiency in heating thanks to the performance of the ExtraCondens exchanger which has an additional section capable of increasing DHW production efficiency by 10%. The boiler is fitted with the VR920 device which, combined with the multiMATIC 700, allows you to connect the boiler to the home WiFi network and, using an App (iOS and Android), to control it even from outside the home. It self-adapts to any type of gas and consists of 82% recyclable material effect of the made in Germany conception. The boiler has already received the Reddot Design Award. Advantages Comfort Very low noise Hot water production up to 17 l/min Unparalleled sanitary and environmental comfort savings Energy class A+ with multiMATIC 700 Excellent energy/efficiency ratio Gas self-adaptation/regulation Up to 10% annual savings compared to normal condensation Safety Environmentally friendly: 82% recyclable boiler and components Strict controls to ensure the high quality standards of Green iQ Simplicity Built-in connectivity Free app for remote management from smartphone, tablet or PC Easy and intuitive programming Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less