Technical features Product code : DIVER 150 T-NA Power supply : 3x400V~ 50Hz Power : 1 kW (1.5 HP) Diameter : 127mm Operating range: from 0.6 to 12 m3 /h with head up to 96 metres Pumped liquid: Clean, without solid or abrasive bodies, non-aggressive Maximum presence of sand in the water: 50gr/ m3 Liquid Temperature Range : from 0°C to +35°C Maximum immersion : 20 metres Delivery port diameter: 1" 1/4 Gas Power Tolerance : +6% / -10% Maximum number of starts: 20/h Motor Protection Degree: IP 68 Engine Protection Class : F Installation : In wells, tanks and cisterns, in vertical position Special Executions on Request: Other voltages and/or frequencies. Automatic version with float. Applications DIVER electric pumps are used in systems for lifting clear water from wells, first collection tanks or cisterns, Roman wells or streams and are suitable for the distribution of pressurized water in domestic systems, small agriculture, sprinkler irrigation of gardens and vegetable gardens. The pump, particularly silent, used inside wells or tanks avoids all the problems related to suction and deactivation Construction features of the pump Submersible monobloc multistage pump with the hydraulic part under the motor which is cooled by the pumped liquid. Impellers and diffusers in Noryl reinforced with glass fiber with wear-resistant wear ring in stainless steel. Outer jacket, stator jacket, upper head with sleeve and closing ring in AISI 304 steel. Encapsulated stator. Cast iron supports. Rotor shaft extension in AISI 304. Motor side lip seal and silicon carbide/silicon carbide mechanical seal on pump side Construction Characteristics of the Engine • Submersible two-pole asynchronous type built completely in stainless steel, dry and cooled from the outside by the pumped liquid. Stator encapsulated in AISI 304L • Squirrel cage rotor mounted on ball bearings, and oversized to guarantee silence, reliability and durability • On request, the single-phase version is supplied with the CONTROL BOX • Protection by the user for the three-phase version • Automatic version with float available • Version with support base and side suction (DRY) available on request Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model: DIVERTRON Code: 60122623 Operating range: from 1 to 5.4 m 3 /h with heads up to 46 metres Pumped liquid: clean, without solid or abrasive bodies, non-aggressive Liquid temperature range: from 0°C to +35°C Maximum immersion: 12 meters Motor protection degree: IP 68 Engine protection class: F Installation: fixed or portable in vertical position Operation: manual or automatic with electronic ON/OFF (continuously with pump totally immersed) Power supply: 1 x 220-240V~50Hz Delivery port diameter: 1” Maximum diameter of the pump: 150mm DAB PUMPS There is a name in the electric pump sector that has been synonymous with high technology and reliability all over the world for over 30 years. This name is DAB, a company that has been designing and building electric pumps since 1975 with a very specific viewpoint: that of responding to the increasingly demanding market demands not only with products that attest to the highest levels of quality, but also with an efficient service and versatile. 35 years of experience and innovation Founded in 1975 in Veneto, DAB PUMPS SpA is today an international point of reference in the water handling sector. Its core business concerns the design, production and sale of electric hydraulic pumps able to satisfy any need for any type of domestic and professional application. A network as big as the world During its 35 years of constant growth, DAB PUMPS has also developed a sales network and technical assistance centers which provide widespread coverage of the national and international market. In addition to its 5 production plants located in Italy, the corporate structure is made up of 9 foreign branches and numerous distributors all over the world. The most reliable products With over 2 million pieces produced every year, DAB PUMPS electric pumps have become synonymous with high technology and reliability. DAB has a very wide range of water pumps, suitable for every need, made with cutting-edge materials that make them increasingly resistant to internal and external stresses, capable of guaranteeing high performance, quality and resistance over the long term, limiting the environmental impact. DAB pumps are the result of continuous research and technology, elements that try to offer flexible and easy-to-use solutions in every field of application. The specific attention that the company places on the materials and the homologation procedures to which each line is subjected before the production release, allows DAB PUMPS to simultaneously ensure the highest degree of resistance and the maximum performance of its products. DAB DIVERTRON Electronic Multi-impeller Electric Pump DAB's Divertron is a 6 inch electronic submersible clean water pump designed for pressurization and gardening and irrigation tasks in domestic and residential settings. Divertron is ideal for use in rainwater recovery systems and to increase the pressure of the water taken from a cistern or tank to be used, for example, to water the garden or vegetable garden. Divertron integrates a pressure switch , a flow sensor and the control electronics for automatic on and off. The automatic operation allows the pump to start and stop autonomously according to the requests of the system and protects it from dry running . Supplied with integrated start capacitor, non-return valve and 15m power cable with Schuko plug Applications Multi-impeller electric submersible pumps with integrated electronics for automatic switching on and off. Ideal for use in rainwater systems and irrigation networks, for pumping water from tanks, ponds and wells and other applications that require high pressure. Available with 3 or 4 impellers. Integrated pressure switch, electronic board and flow sensor. Dry-running protection. Non-return valve integrated in the delivery. Easy to use, and high reliability. Suitable for pumping clean water. Excellent cooling of the motor which allows the operation of the pump even if only partially submerged. Supplied with stainless steel suction filter or with stainless steel fitting for use with suction kit, particularly suitable for tanks with possible presence of debris or dirt on the bottom. An equipped version with suction kit is also available Construction features of the pump: Anti-corrosion and anti-oxidation material Stainless steel debris filter Engine construction features: Continuous service asynchronous submersible type Thermal protection against overheating. Anti-wear crankshaft Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

D-CONNECT DAB Wi-Fi control cod. 60196424 DConnect is the new DAB cloud service that allows you to control and manage your installations remotely , in real time and wherever you are. You can control pumps for pressurization, for waste water management and circulators for heating and air conditioning. Technical assistance and constant remote monitoring 24/7 Improve your customer service and simplify your work It supports different types of applications Lower building management costs Can also be used in pre-existing systems (if compatible products and a permanent Internet connection are present at the installation site) Control your system from anywhere at any time. From home, from the office, from work, on the road, wherever there is an Internet connection! Thanks to D.Connect you can control and manage the pumps from your smartphone, tablet or PC as if you were on site even if you are hundreds of kilometers away! Connected pumps, like any other network-connected (IoT) object, present risks of cyber attacks. DAB has been developing a cybersecurity culture for years to ensure safe and secure solutions for our customers. DConnect, in its hardware and software components, has been tested following the most restrictive international security protocols. The DConnect service can be used to manage one or more pumps for water pressure boosting, wastewater management and circulation in heating and air conditioning systems. It is a multi-channel service with high added value which, regardless of the nature and size of the system, simplifies configuration by always showing the same interface and the same tools. The modularity offered by DConnect allows you to manage up to 8 different pumps and up to 4 pumps with the DConnect Box 2, in an extremely simple and integrated way. Compatible with: DAB IoP Internet of Pumps! The D.Connect service consists of a modern and advanced Cloud system and a hardware part, the D.Connect Box, essential for connecting the pumps to be controlled to the Internet. With this service, DAB pumps enter the IoT world, or rather IoP! IMMEDIATELY READY TO USE D.Connect does not require any particular infrastructure for installation: an internet connection near the installation and a smartphone are enough. The configuration takes place in a few simple guided steps. THE SERVICE THAT MAKES YOUR LIFE EASIER With D.Connect, monitoring DAB products becomes easier and more intuitive than ever and all the main adjustments can also be made remotely, in just a few steps. For total control and no surprises. TECHNOLOGY WITHIN EVERYONE'S REACH Made with the most recent technologies, DConnect guarantees many advantages compared to other traditional BMS applications. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model : Euro 40 /50 M single-phase Code : 102970080 Number of impellers : 4 Power : 0.75 kW (1 HP) Capacitor capacity : 25mF Operating range : Flow rate up to 80 l/min (4.8 m3/h) with heads up to 42.5 metres. Maximum working pressure : 8 bar (800 kPa) General characteristics Multistage centrifugal EURO electric pump, pump body in cast iron. Horizontal axis multistage centrifugal pump, characterized by extremely silent operation, suitable for domestic use for water supply and pressurization, irrigation of orchards and gardens, movement of water in general. Advantages Pump body in 200 UNI ISO 185 cast iron engine mount in die-cast aluminium seal holder cover in AISI 304 steel Mechanical seal in carbon/ceramic Motor shaft in AISI 304 steel Impellers, diffuser bodies and diffusers in technopolymer Stainless steel shim rings Features of the series Motor protection degree : IP 44 Degree of protection of the terminal block: IP 55 Insulation class : F Operating range : From 10 to 120 l/min with head up to 72 metres Pumped liquid: clean, free from solid or abrasive substances, non viscous, non aggressive, non crystallized and chemically neutral, close to the characteristics of water Liquid temperature range : From 0°C to +35°C for domestic use (EN 60335-2-41). From o°C to +40°C for other uses Maximum working pressure : 8 bar (800 kPa) Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model: JET 151 T three-phase Code: 60145787 Power supply: 1 x 230-400V~50Hz Power: 1.1kW (1.5HP) Capacitor capacity: 31.5mF Operating range: from 0.4 to 10.5 m³/h with head up to 62 metres Liquid temperature range: from 0°C to +35°C or 40°C Maximum working pressure : 8 bar (800 kPa) Maximum ambient temperature: +40°C. To view more product information (dimensions, absorption) CLICK HERE and consult the attached images. DAB PUMPS There is a name in the electric pump sector that has been synonymous with high technology and reliability all over the world for over 30 years. This name is DAB, a company that has been designing and building electric pumps since 1975 with a very specific viewpoint: that of responding to the increasingly demanding market demands not only with products that attest to the highest levels of quality, but also with an efficient service and versatile. 35 years of experience and innovation Founded in 1975 in Veneto, DAB PUMPS SpA is today an international point of reference in the water handling sector. Its core business concerns the design, production and sale of electric hydraulic pumps able to satisfy any need for any type of domestic and professional application. A network as big as the world During its 35 years of constant growth, DAB PUMPS has also developed a sales network and technical assistance centers which provide widespread coverage of the national and international market. In addition to its 5 production plants located in Italy, the corporate structure is made up of 9 foreign branches and numerous distributors all over the world. The most reliable products With over 2 million pieces produced every year, DAB PUMPS electric pumps have become synonymous with high technology and reliability. DAB has a very wide range of water pumps, suitable for every need, made with cutting-edge materials that make them increasingly resistant to internal and external stresses, capable of guaranteeing high performance, quality and resistance over the long term, limiting the environmental impact. DAB pumps are the result of continuous research and technology, elements that try to offer flexible and easy-to-use solutions in every field of application. The specific attention that the company places on the materials and the homologation procedures to which each line is subjected before the production release, allows DAB PUMPS to simultaneously ensure the highest degree of resistance and the maximum performance of its products. General characteristics JET Self-priming centrifugal electric pumps DOMESTIC WATER SUPPLY Self-priming centrifugal pump with excellent suction capacity even in the presence of air bubbles. Particularly suitable for water supply in domestic systems, small-scale agriculture, gardening and in general where the self-priming function is required. Jet: pump body in cast iron. Motor support in cast iron, impeller, diffuser, Venturie tube in technopolymer sand guard. Stainless steel shim rings. Mechanical seal in carbon/ceramic. Asynchronous type motor, enclosed and cooled by external ventilation. Built-in thermo-amperometric protection and capacitor permanently inserted for the single-phase version. To protect the three-phase motor, the use of a motor protection switch is recommended in accordance with current standards. Series features: Operating range: from 0.4 to 10.5 m3/h with heads up to 62 metres. Liquid temperature range: from 0°C to +35°C for domestic use (EN60335-2-41) from 0°C to +40°C for other uses. Pumped liquid: clean, free from solid or abrasive substances, non-viscous, non-aggressive, non-crystallised and chemically neutral. Maximum ambient temperature: + 40°C. Maximum working pressure: 6 bar (600 kPa) for Jet and Jetcom. 8 bar (800 kPa) for Jetinox and jet 200-300-151-251. Degree of protection: IP 44 (IP 55 at the terminal block). Insulation class: F Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model: JET 251 T three-phase Code: 60145849 Power supply: 3 x 230-400V~50Hz Power: 1.85kW (2.5HP) Capacitor capacity: 31.5mF Operating range: from 0.4 to 10.5 m³/h with head up to 62 metres Liquid temperature range: from 0°C to +35°C or 40°C Maximum working pressure : 8 bar (800 kPa) Maximum ambient temperature: +40°C. To view more product information (dimensions, absorption) CLICK HERE and consult the attached images. DAB PUMPS There is a name in the electric pump sector that has been synonymous with high technology and reliability all over the world for over 30 years. This name is DAB, a company that has been designing and building electric pumps since 1975 with a very specific viewpoint: that of responding to the increasingly demanding market demands not only with products that attest to the highest levels of quality, but also with an efficient service and versatile. 35 years of experience and innovation Founded in 1975 in Veneto, DAB PUMPS SpA is today an international point of reference in the water handling sector. Its core business concerns the design, production and sale of electric hydraulic pumps able to satisfy any need for any type of domestic and professional application. A network as big as the world During its 35 years of constant growth, DAB PUMPS has also developed a sales network and technical assistance centers which provide widespread coverage of the national and international market. In addition to its 5 production plants located in Italy, the corporate structure is made up of 9 foreign branches and numerous distributors all over the world. The most reliable products With over 2 million pieces produced every year, DAB PUMPS electric pumps have become synonymous with high technology and reliability. DAB has a very wide range of water pumps, suitable for every need, made with cutting-edge materials that make them increasingly resistant to internal and external stresses, capable of guaranteeing high performance, quality and resistance over the long term, limiting the environmental impact. DAB pumps are the result of continuous research and technology, elements that try to offer flexible and easy-to-use solutions in every field of application. The specific attention that the company places on the materials and the homologation procedures to which each line is subjected before the production release, allows DAB PUMPS to simultaneously ensure the highest degree of resistance and the maximum performance of its products. General characteristics JET Self-priming centrifugal electric pumps DOMESTIC WATER SUPPLY Self-priming centrifugal pump with excellent suction capacity even in the presence of air bubbles. Particularly suitable for water supply in domestic systems, small-scale agriculture, gardening and in general where the self-priming function is required. Jet: pump body in cast iron. Motor support in cast iron, impeller, diffuser, Venturie tube in technopolymer sand guard. Stainless steel shim rings. Mechanical seal in carbon/ceramic. Asynchronous type motor, enclosed and cooled by external ventilation. Built-in thermo-amperometric protection and capacitor permanently inserted for the single-phase version. To protect the three-phase motor, the use of a motor protection switch is recommended in accordance with current standards. Series features: Operating range: from 0.4 to 10.5 m3/h with heads up to 62 metres. Liquid temperature range: from 0°C to +35°C for domestic use (EN60335-2-41) from 0°C to +40°C for other uses. Pumped liquid: clean, free from solid or abrasive substances, non-viscous, non-aggressive, non-crystallised and chemically neutral. Maximum ambient temperature: + 40°C. Maximum working pressure: 6 bar (600 kPa) for Jet and Jetcom. 8 bar (800 kPa) for Jetinox and jet 200-300-151-251. Degree of protection: IP 44 (IP 55 at the terminal board). Insulation class: F Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model: EUROPRO 100M single-phase Power supply: 1 x 230V~50Hz Power: 0.75kW (1HP ) Capacitor capacity: 25mF Maximum noise level: 66 db(A) Operating range: up to 400 l/min with head up to 15 m. Liquid temperature range: up to 60°C. PH Range: 6.5-8.4. Self-priming: up to 2 m (without foot valve) . Pumped liquid: clean or slightly dirty water with suspended solids or water treated with a chlorine process To view more product information (dimensions, absorption) CLICK HERE and consult the attached images. DAB PUMPS There is a name in the electric pump sector that has been synonymous with high technology and reliability all over the world for over 30 years. This name is DAB, a company that has been designing and building electric pumps since 1975 with a very specific viewpoint: that of responding to the increasingly demanding market demands not only with products that attest to the highest levels of quality, but also with an efficient service and versatile. 35 years of experience and innovation Founded in 1975 in Veneto, DAB PUMPS SpA is today an international point of reference in the water handling sector. Its core business concerns the design, production and sale of electric hydraulic pumps able to satisfy any need for any type of domestic and professional application. A network as big as the world During its 35 years of constant growth, DAB PUMPS has also developed a sales network and technical assistance centers which provide widespread coverage of the national and international market. In addition to its 5 production plants located in Italy, the corporate structure is made up of 9 foreign branches and numerous distributors all over the world. The most reliable products With over 2 million pieces produced every year, DAB PUMPS electric pumps have become synonymous with high technology and reliability. DAB has a very wide range of water pumps, suitable for every need, made with cutting-edge materials that make them increasingly resistant to internal and external stresses, capable of guaranteeing high performance, quality and resistance over the long term, limiting the environmental impact. DAB pumps are the result of continuous research and technology, elements that try to offer flexible and easy-to-use solutions in every field of application. The specific attention that the company places on the materials and the homologation procedures to which each line is subjected before the production release, allows DAB PUMPS to simultaneously ensure the highest degree of resistance and the maximum performance of its products. Features General EUROPRO Pumps for swimming pools, ponds and salt water High efficiency self-priming centrifugal electric pumps with large capacity built-in pre-filter. Engine completely isolated from water. Extremely silent and highly reliable, developed for the circulation and filtration of water in domestic and residential swimming pools. Also suitable in particular applications where the handling of aggressive liquids is required, in fish farms, agriculture and industry. Series features: Operating range: up to 42 m3/h with head up to 22 m. Pumped liquid: clean or slightly dirty water with suspended solids, long fibres; particularly aggressive water with high percentages of chlorine/bromine and PHMB (Poly Hexamethylene Biguanide) or water treated with chlorine-electrolysis process. PH Range: 6.5-8.4 Liquid temperature range: up to 60°C Maximum ambient temperature: 50°C Maximum working pressure: 2.5 bar Nominal operating pressure: 0.8 - 1.2 Bar (ideal 1 Bar) Installation: fixed or portable in horizontal position. Special executions on request: other frequencies and/or voltages Fittings on request: 2"/50 - 63 kit (two fittings + O-ring - see "Accessories") Reference standard: IEC - 60364 Degree of protection of the motor and of the terminal box: IP55 Degree of protection on the terminal block: IP 55 Insulation class: F Series voltage: single-phase 220/240 V - 50 Hz three-phase 230/400 V - 50 Hz Construction features of the pump: Pump body in glass fiber reinforced technopolymer. Pre-filter cover in transparent and anti-oxidation polycarbonate to ensure constant visibility over time. Nylon filter. Impeller in glass fiber reinforced technopolymer, developed to ensure total coverage and insulation of the motor shaft from the pumped liquid. Reinforced technopolymer diffuser. Mechanical seal in carbon / alumina / NBR / AISI 316. Pump body O-ring in NBR, screws and reinforcement ring nuts in AISI 316 steel. Butterfly filler and drain plugs that do not require the use of tools for removal and repositioning. Engine construction features: Continuous service asynchronous motor (S1) with 2 poles with a wide range of powers from 0.5 HP to 3 HP both single-phase and three-phase (see technical specifications). Motor casing in die-cast aluminum with cataphoresis surface treatment to prevent oxidation even in aggressive environments. Support base supplied as standard with rubber feet to reduce vibrations. Single-phase version with built-in thermo-amperometric protection and permanently inserted capacitor (PSC) and assembled inside the terminal box for all versions. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model: JETCOM 82 M single-phase Power supply: 1 x 220-240V~50Hz Power: 0.6kW (0.8HP) Capacitor capacity: 12.5mF Operating range: flow rate up to 60 l/min (3.6 m3/h) with head up to 47 metres. Liquid temperature range: from 0°C to +35°C or 40°C Maximum working pressure: 6 bar (600 kPa) Maximum ambient temperature: +40°C. To view more product information (dimensions, absorption) CLICK HERE and consult the attached images. DAB PUMPS There is a name in the electric pump sector that has been synonymous with high technology and reliability all over the world for over 30 years. This name is DAB, a company that has been designing and building electric pumps since 1975 with a very specific viewpoint: that of responding to the increasingly demanding market demands not only with products that attest to the highest levels of quality, but also with an efficient service and versatile. 35 years of experience and innovation Founded in 1975 in Veneto, DAB PUMPS SpA is today an international point of reference in the water handling sector. Its core business concerns the design, production and sale of electric hydraulic pumps able to satisfy any need for any type of domestic and professional application. A network as big as the world During its 35 years of constant growth, DAB PUMPS has also developed a sales network and technical assistance centers which provide widespread coverage of the national and international market. In addition to its 5 production plants located in Italy, the corporate structure is made up of 9 foreign branches and numerous distributors all over the world. The most reliable products With over 2 million pieces produced every year, DAB PUMPS electric pumps have become synonymous with high technology and reliability. DAB has a very wide range of water pumps, suitable for every need, made with cutting-edge materials that make them increasingly resistant to internal and external stresses, capable of guaranteeing high performance, quality and resistance over the long term, limiting the environmental impact. DAB pumps are the result of continuous research and technology, elements that try to offer flexible and easy-to-use solutions in every field of application. The specific attention that the company places on the materials and the homologation procedures to which each line is subjected before the production release, allows DAB PUMPS to simultaneously ensure the highest degree of resistance and the maximum performance of its products. General characteristics JETCOM extension Self-priming centrifugal electric pumps DOMESTIC WATER SUPPLY Self-priming centrifugal pump with excellent suction capacity even in the presence of air bubbles. Suitable for use with water with small sandy impurities. Particularly used for water supply in domestic systems. Suitable for small-scale agriculture and gardening, limited industrial services and where the self-priming function is required. Series features: Operating range: up to 0.6 to 5.4 m3 /h with head up to 54 metres. Pumped liquid: clean, free from solid or abrasive substances, non-viscous, non-aggressive, non-crystallised and chemically neutral. Liquid temperature range: from 0 °C to +35°C for domestic use (EN 60335-2-41). Maximum ambient temperature: +40°C Maximum working pressure: 6 bar (600 kPa) Maximum suction depth: 8 meters. Installation: fixed or portable in horizontal position. Special executions on request: other voltages and/or frequencies. Motor protection degree: IP 44 Degree of protection on the terminal block: IP 55 Insulation class: F Series voltage: single-phase 220/240V / 50Hz three-phase 230/400V / 50H Construction features of the pump Pump body in technopolymer and motor support in die-cast aluminium. Technopolymer impeller, diffuser, venturi tube and sand guard. Stainless steel shim rings. Mechanical seal in carbon/ceramic. Engine construction features Asynchronous type, closed, cooled by external ventilation. Rotor mounted on greased-for-life and oversized ball bearings to guarantee silence and durability. Built-in thermo-amperometric protection and capacitor permanently inserted in the single-phase version. For the protection of the three-phase motor it is recommended to use a motor protection switch in accordance with current standards. Construction according to CEI 2-3 / CEI 61-69 (EN 60335-2-41) standards. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Product code : DTRON 2 35/120 Power supply : 220~240/50/1 Power : 0.6 kW (0.8 HP) Maximum ambient and liquid temperature: 50°C Factory cut-in : 2.4 bar (±0.2) Flanging or delivery thread : Threaded 1" 1/4 Dimensions : 611x185mm New DTron 2 series The evolution of the submerged autoclave 43 years of experience. An unstoppable drive towards innovation. Constant communication with all markets. This is the ecosystem in which DAB products are born and evolve. The new DTron series is proof of this: an important step forward in redefining the characteristics of submersible pumps , made with the security of the market leader DTron 2 and DTron 3 are born from the desire to create a range of "easy" but extremely efficient pumps . Technologically advanced but simple to use. Reliable and performing, in the various applications, thanks also to a set of intelligent accessories. DTron 2 Together with a series of fully integrated and modular accessories, they represent an offer of solutions for every use in different types of installations. The customized value For Dab it is essential to design solutions according to the real needs of all the players in the sector The new DTron submersible pumps guarantee advantages for installers, distributors and end users by saving them space, time and costs A large, constant and rapid evolution possible only thanks to the attention and listening of our top market experts: you. A Global Listen We move water all over the world, with over 2 million pumps installed every year we are also able to handle special needs. In Australia where nature still has a dominant role in the territory, the functioning of our products is put to the test by insects and small reptiles that infiltrate the pumps to make their den Thanks to this experience DAB has designed the new models of the DTron range making them unassailable by any external agent, solving the case that emerged in Australia and in fact making our solutions even safer in all geographical areas of the world Experiences and Innovation 43 years of experience, an unstoppable drive towards innovation and constant communication with all markets. This is the ecosystem in which DAB products are born and evolve The new DTron series is proof of this: an important step forward in redefining the characteristics of pumps submerged, made with the safety of the market leader DTron 2 was created to create a range of "easy" but extremely efficient pumps. Very advanced but simple to use. Reliable and performing, in the various applications, thanks also to a set of intelligent accessories Integrated vase A quick and easy installation. A more essential and less bulky system. Greater reliability in time. The expansion vessel improves the pressure tightness of the system, avoiding unnecessary restarts, reducing water hammer and lengthening the life of the pump. With this integrated component, installation times are reduced NFC technology A simple and constant control of the pump. Maximum ease and autonomy in the installation of accessories. NFC (Near Field Communication) allows the use of pumps with float and level sensor* without the need for any additional wiring. The accessories attach without having to disassemble the pump body. All this guarantees speed and reliability. PLC technology Only for DTron 3 A simple and constant control of the pump. Maximum ease and autonomy in the installation of accessories. PLC (Power Line Communication) allows the use of the Com Box electronic control device without the need for any physical connection but through the electric power supply line. DConnect With DConnect Box 2 you access the DAB cloud service. The new App allows you to manage and monitor the system pressure, the alarms and the residual availability of water in the tank directly from your smartphone or tablet wherever you are! DTron 3 thus becomes the first submersible pump equipped with a display DOC68 Maximum installation flexibility. The ultimate in waterproofing. The maximum of unassailability. With this accessory and the IP68 certification, DTron pumps can also be installed out of the water, thus transforming submersible pumps into real traditional autoclaves Vent valve Benefits during installation and throughout use. The vent valve allows for immediate priming upon first installation and always guarantees the correct functioning of the pump. Facilitated maintenance Modular and functional construction. Thanks to the modular components of the pump it is possible to make maintenance easier. Elements that can be disassembled, repaired and replaced separately which simplify the management of any problems, reducing maintenance costs. Com Box Only for DTron 3 More comfortable. Smarter. With Com Box you can intervene on the pump pressure parameters and view any alarms. No direct connection to the pump is required (PLC Optional accessories X-Kit for the X version Combined with the X version, it allows the suction of water at a level such as to avoid the pumping of dust and sludge present on the bottom of wells and tanks DOC68 With the DOC68 it is possible to install DTron also outdoors as an IP68 certified surface pump Floating Allows the water level of the tank to be detected, preventing emptying of the same, and the pump to go into blockage, avoiding dry running due to too low a water level Level sensor Only for DTron 3 Connected to the DConnect Box 2, it checks the water level in the tank and communicates it to the user via the App (only on DTron 3) COM Box Only for DTron 3 It allows you to change the start and stop pressure and to check any pump alarms, in an easy and intuitive way DConnect Box 2 Only for DTron 3 Thanks to DConnect Box 2 you can control the pump, set the start and stop parameters, see alarm details and monitor the pressure directly from your smartphone, obtaining the best performance and lightness of maintenance never seen before Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION The product will be available on order and will be shipped in 10 working days! Technical features Product code : JET 251 M Power supply : 1x 220-240V ~ 50Hz Power : 1.85 kW (2.5 HP) Pumped liquid: clean, free from solid or abrasive substances, non viscous, non aggressive, non crystallized and chemically neutral Operating range: from 0.4 to 10.5 m 3 /h with head up to 62 metres. Liquid Temperature Range: from 0°C to +35°C for domestic use, from 0°C to +40°C for other uses Maximum Ambient Temperature: +40° C Maximum working pressure: 8 Bar (800 kPa) Installation : Fixed in horizontal position Special Executions on Request: Other frequencies and/or voltages Motor Protection Degree: IP 44 Degree of protection on the terminal block: IP 55 Insulation class : F Applications • Self-priming centrifugal pump with excellent suction capacity even in the presence of air bubbles • Suitable for use with water with small sandy impurities • Particularly used for water supply in domestic systems. • Suitable for small-scale agriculture and gardening, limited industrial services and where the self-priming function is required Construction features of the pump • Pump body and motor support in cast iron • Technopolymer impeller, diffuser, venturi tube and sand guard • Double impeller for the JET 151 and 251 version • Stainless steel shim rings • Carbon/ceramic mechanical seal Construction Characteristics of the Engine • Asynchronous type, closed, cooled by external ventilation • Rotor mounted on greased-for-life and oversized ball bearings to guarantee silence and durability • Incorporated thermo-amperometric protection and capacitor permanently inserted in the single-phase version • To protect the three-phase motor, it is recommended to use a motor protection switch in accordance with current standards • Construction according to CEI 2-3 / CEI 61-69 (EN 60335-2-41) standards Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model : Genix 130 Power supply : 1 x 230V ~ 50Hz P1 Maximum : 490 kW P2 Nominal : 0.32kW ~ 0.44HP Liquid Temperature Range : from 0° to +50 °C Pumped Liquid : Wastewater As Regulated by EN 12050-3 Third party approvals : VDE-GS, LGA, VDE-EMC Capacity : Approved for 6 and 9 liter toilets according to EN12050-3 Protection class : IP44 Dimensions and weight DAB Genix Automatic Collection and Lifting Station Its use is indispensable in cases where waste water from toilets, showers, washbasins or bidets cannot be expelled by gravity. These lifting stations collect and pump wastewater through a small pipe to the nearest gravity drain. The GENIX models are characterized by the front toilet discharge connection. The GENIX WL version differs from the lateral toilet attachment, specifically designed for applications with wall-hung sanitary ware or when there is not enough space behind the toilet. In the 110 model it is possible to connect, in addition to the toilet, an additional user such as a sink. In the 130 model, in addition to the toilet, three further utilities, such as a sink, shower and bidet. The proposed models are characterized by silent operation, further improved in the Comfort versions. The powerful, reliable pump and nickel-plated stainless steel grinder make the product durable and virtually maintenance-free. Extraordinary maintenance in the event of a blockage is extremely easy, with the possibility of accessing the motor unit from the outside without the need to remove the product, guaranteeing clean and problem-free maintenance. The installation kit is complete with connections that can be adapted to different pipe diameters with quick coupling and integrated non-return valves. An audible flood alarm and an extension adapter tube are available as accessories to adapt the GENIX to pre-existing installations. Construction Characteristics of the Pump Tank in polypropylene loaded with 30% barium. In the soundproofed version, soundproofing in polypropylene loaded with 70% barium. Impeller in PPO 30% glass fibre. Motor shaft in stainless steel. Grinder in nickel-plated stainless steel Construction Characteristics of the Engine Asynchronous type in stainless steel. Shaft and cap in stainless steel. Thermal protection against overheating. Anti-wear crankshaft GENIX is the new DAB shredder, designed to provide the highest level of efficiency in the 3 main phases of its life cycle. Quick installation, comfort of use and simplified maintenance make the GENIX a new point of reference for the creation of a bathroom, where a bathroom you would never have thought was possible Everything you need is standard GENIX is equipped with everything needed for a quick and easy installation. Fittings equipped with non-return valves, clamps, adapters, screws for fixing to the ground, anti-vibration feet and illustrated quick guide. Connect to the site with the QR code and you will be able to see for yourself how easy and immediate installation really is Silent and Reliable Newly developed shredder: robust, durable and reliable  High performance and silent motor Anti-odour system Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

Technical features Model: MULTI INOX 5 Code : 60122694 Number of impellers : 5 Operating range: flow rate up to 90 l/min; head up to 59 m Liquid temperature range: from 0°C to +35°C for domestic use, from 0°C to +40°C for other uses. Pumped liquid: clean, free from solid or abrasive substances, non-viscous, non-aggressive, non-crystallised and chemically neutral. Maximum suction depth: 8 meters Maximum ambient temperature: +40°C Degree of protection: IPX4 Insulation class: F Installation: fixed or portable in horizontal position Special versions on request: other voltages and/or frequencies Packing dimensions : 460 x 230 x 270 Weight 12.5kg DAB PUMPS There is a name in the electric pump sector that has been synonymous with high technology and reliability all over the world for over 30 years. This name is DAB, a company that has been designing and building electric pumps since 1975 with a very specific viewpoint: that of responding to the increasingly demanding market demands not only with products that attest to the highest levels of quality, but also with an efficient service and versatile. 35 years of experience and innovation Founded in 1975 in Veneto, DAB PUMPS SpA is today an international point of reference in the water handling sector. Its core business concerns the design, production and sale of electric hydraulic pumps able to satisfy any need for any type of domestic and professional application. A network as big as the world During its 35 years of constant growth, DAB PUMPS has also developed a sales network and technical assistance centers which provide widespread coverage of the national and international market. In addition to its 5 production plants located in Italy, the corporate structure is made up of 9 foreign branches and numerous distributors all over the world. The most reliable products With over 2 million pieces produced every year, DAB PUMPS electric pumps have become synonymous with high technology and reliability. DAB has a very wide range of water pumps, suitable for every need, made with cutting-edge materials that make them increasingly resistant to internal and external stresses, capable of guaranteeing high performance, quality and resistance over the long term, limiting the environmental impact. DAB pumps are the result of continuous research and technology, elements that try to offer flexible and easy-to-use solutions in every field of application. The specific attention that the company places on the materials and the homologation procedures to which each line is subjected before the production release, allows DAB PUMPS to simultaneously ensure the highest degree of resistance and the maximum performance of its products. General characteristics Self-priming, multi-impeller pump, ideal for water supply in domestic and garden applications. Very performing and highly silent. Available with 3, 4 and 5 impellers in AISI 304 stainless steel. Anti-corrosion and anti-overheating materials. Double insulation system between motor and hydraulic part. Excellent resistance to low temperatures. Equipped with power cable plus plug. Engine construction features: Stainless steel pump jacket. Pressure body, suction body and motor support in technopolymer. Impellers in AISI 304 steel, diffuser bodies and diffusers in technopolymer. Mechanical seal in carbon/ceramic. Rotor shaft in AISI 304 steel. Continuous service single-phase asynchronous motor. Built-in thermo-amperometric protection and permanently inserted capacitor. APPLICATIONS Multistage centrifugal pump with horizontal axis, self-priming with excellent suction capacity even in the presence of air bubbles, characterized by extremely silent operation suitable for domestic use for water supply and pressurization, irrigation of orchards and gardens, movement of water in general. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less