TECHNICAL DATA Operating range: from 0.4 to 10.5 m3 /h with head up to 62 metres. Pumped liquid: clean, free from solid or abrasive substances, non-viscous, non-aggressive, non-crystallised and chemically neutral. Liquid temperature range: from 0°C to +35°C for domestic use (EN 60335-2-41) from 0°C to +40°C for other uses. Maximum ambient temperature: +40°C Maximum working pressure: 8 bar (800 kPa) Installation: fixed in horizontal position. Special executions on request: other frequencies and/or voltages. Motor protection degree: IP 44 Degree of protection on the terminal block: IP 55 Insulation class: F Series voltages: single-phase 220/240 V / 50 Hz three-phase 230/400V / 50Hz APPLICATIONS Self-priming centrifugal pump with excellent suction capacity even in the presence of air bubbles. Suitable for use with water with small sandy impurities. Particularly used for water supply in domestic systems. Suitable for small-scale agriculture and gardening, limited industrial services and where the self-priming function is required. CONSTRUCTION CHARACTERISTICS OF THE PUMP Pump body and motor support in cast iron. Technopolymer impeller, diffuser, venturi tube and sand guard. Double impeller for the JET 151 and 251 version. Stainless steel shim rings. Mechanical seal in carbon/ceramic. CONSTRUCTION CHARACTERISTICS OF THE ENGINE Asynchronous type, closed, cooled by external ventilation. Rotor mounted on greased-for-life and oversized ball bearings to guarantee silence and durability. Built-in thermo-amperometric protection and capacitor permanently inserted in the single-phase version. For the protection of the three-phase motor it is recommended to use a motor protection switch in accordance with current standards. Construction according to CEI 2-3 / CEI 61-69 (EN 60335-2-41) standards. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Dab control inverter for hydraulic pumps Model ACTIVE DRIVER PLUS MM 1 1 Code 60149661 Single-phase General characteristics Brand: Dab Code: 60149661 Model: ACTIVE DRIVER M/M 1.1 Power supply: Single-phase Data sheet Max motor current A: 8.5 Max engine power (Kw): 1.1 50Hz power supply: single-phase 1x230 Electric pump power supply: single-phase 1x230 Communication interface for groups: Yes Use with pump type: Surface, submersible 4" and 5" pumps with single-phase motor and motor draw up to 8.5A Pressure regulation (bar): 1-9 Weight (kg): 3.5 description The Active Driver Plus are inverters for the control and command of hydraulic pumps and find their natural application in constant pressure pumping systems: domestic, industrial and agricultural. Thanks to the OLED display there is an extremely simple and intuitive graphical interface. Viewing or modifying any parameter is extremely simple, this simplifies maintenance. Installation is very simple thanks to the assisted installation, the inverter asks the user for the parameters necessary to be configured. The Active Driver Plus allow a reduction in electricity consumption, thanks to the inverter technology and at the same time guaranteeing maximum comfort thanks to the constant pressure. They are extremely versatile because they do not require external sensors and non-return valves, in fact they have a pressure sensor, a flow switch and a non-return valve inside. The advantages of Active Driver Plus are: - comfort thanks to the constant pressure. - energy saving thanks to inverter technology. - greater silence - compactness - all integrated protections: dry running, amperometric, abnormal voltages, overtemperature and freezing. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

TECHNICAL FEATURES Model: 2K45/50M single-phase Code: 500124020 Power supply: 1 x 230V ~ 50Hz Power: 0.75kW x 2 (1HP x 2) Max pressure obtainable : 4.2 bar Pressure switch setting: 2.2÷3.3 bar 2K Lifting unit with 2 double impeller pumps k Lifting unit with 2 K-type double impeller centrifugal pumps complete with base, suction and delivery manifold, 2 diaphragm tanks. Particularly suitable for small and medium-sized systems for civil use. The use of K double-impeller centrifugal electric pumps characterizes a high power-pressure ratio, ensuring high efficiency and extremely low noise. They are distinguished by their constructive sturdiness, compactness and absolute reliability. CHARACTERISTICS: ELECTRICAL CABINET Automatic reverser, for exchanging the starting order of the pumps at each start-up. General switch . Possibility of inserting a float or pressure switch for protection against dry running. Low voltage auxiliary circuit complete with transformer and protection fuses. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

TECHNICAL FEATURES Model: 2 K55/50 M single-phase Code: 500124020 Power supply: 1 x 230V ~ 50Hz Power: 0.75kW x 2 (1HP x 2) Max pressure obtainable : 4.2 bar Pressure switch setting: 2.2÷3.3 bar 2K Lifting unit with 2 double impeller pumps k Lifting unit with 2 K-type double-impeller centrifugal pumps complete with base, suction and delivery manifold, 2 diaphragm tanks. Particularly suitable for small and medium-sized systems for civil use. The use of K double-impeller centrifugal electric pumps characterizes a high power-pressure ratio, ensuring high efficiency and extremely low noise. They are distinguished by their constructive sturdiness, compactness and absolute reliability. CHARACTERISTICS: ELECTRICAL CABINET Automatic reverser, for exchanging the starting order of the pumps at each start-up. General switch . Possibility of inserting a float or pressure switch for protection against dry running. Low voltage auxiliary circuit complete with transformer and protection fuses. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model: JET 151 M single-phase Code: 102160062 Power supply: 1 x 220-240V~50Hz Power: 1.1kW (1.5HP) Capacitor capacity: 31.5mF Operating range: flow rate up to 75 l/min (4.5 m3/h) with heads up to 61 metres. Liquid temperature range: from 0°C to +35°C or 40°C Maximum working pressure : 8 bar (800 kPa) Maximum ambient temperature: +40°C. To view more product information (dimensions, absorption) CLICK HERE and consult the attached images. DAB PUMPS There is a name in the electric pump sector that has been synonymous with high technology and reliability all over the world for over 30 years. This name is DAB, a company that has been designing and building electric pumps since 1975 with a very specific viewpoint: that of responding to the increasingly demanding market demands not only with products that attest to the highest levels of quality, but also with an efficient service and versatile. 35 years of experience and innovation Founded in 1975 in Veneto, DAB PUMPS SpA is today an international point of reference in the water handling sector. Its core business concerns the design, production and sale of electric hydraulic pumps able to satisfy any need for any type of domestic and professional application. A network as big as the world During its 35 years of constant growth, DAB PUMPS has also developed a sales network and technical assistance centers which provide widespread coverage of the national and international market. In addition to its 5 production plants located in Italy, the corporate structure is made up of 9 foreign branches and numerous distributors all over the world. The most reliable products With over 2 million pieces produced every year, DAB PUMPS electric pumps have become synonymous with high technology and reliability. DAB has a very wide range of water pumps, suitable for every need, made with cutting-edge materials that make them increasingly resistant to internal and external stresses, capable of guaranteeing high performance, quality and resistance over the long term, limiting the environmental impact. DAB pumps are the result of continuous research and technology, elements that try to offer flexible and easy-to-use solutions in every field of application. The specific attention that the company places on the materials and the homologation procedures to which each line is subjected before the production release, allows DAB PUMPS to simultaneously ensure the highest degree of resistance and the maximum performance of its products. General characteristics JET Self-priming centrifugal electric pumps DOMESTIC WATER SUPPLY Self-priming centrifugal pump with excellent suction capacity even in the presence of air bubbles. Particularly suitable for water supply in domestic systems, small-scale agriculture, gardening and in general where the self-priming function is required. Jet: pump body in cast iron. Motor support in cast iron, impeller, diffuser, Venturie tube in technopolymer sand guard. Stainless steel shim rings. Mechanical seal in carbon/ceramic. Asynchronous type motor, enclosed and cooled by external ventilation. Built-in thermo-amperometric protection and capacitor permanently inserted for the single-phase version. To protect the three-phase motor, the use of a motor protection switch is recommended in accordance with current standards. Series features: Operating range: from 0.4 to 10.5 m3/h with heads up to 62 metres. Liquid temperature range: from 0°C to +35°C for domestic use (EN60335-2-41) from 0°C to +40°C for other uses. Pumped liquid: clean, free from solid or abrasive substances, non-viscous, non-aggressive, non-crystallised and chemically neutral. Maximum ambient temperature: + 40°C. Maximum working pressure: 6 bar (600 kPa) for Jet and Jetcom. 8 bar (800 kPa) for Jetinox and jet 200-300-151-251. Degree of protection: IP 44 (IP 55 at the terminal board). Insulation class: F Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model Self-priming centrifugal electric pump Dab Model DP 151 T Energy efficiency Operating range: up to 4.3 m3/h. Pumped liquid: clean, free from solid or abrasive substances, not viscous, non-aggressive, non-crystallised and chemically neutral, close to the water features. Liquid temperature range: from 0°C to +35°C domestic use (EN 60335-2-41). from 0°C to +40°C for other uses. Maximum ambient temperature: +40°C Maximum working pressure: DP 82 - DP 102 6 bar (600 kPa). DP 151 - DP 251 8 bar (800 kPa). Installation: fixed in horizontal position. Special executions on request: other voltages and/or frequencies. Motor protection degree: IP 44 Degree of protection on the terminal block: IP 55 Insulation class: F Series voltage: single-phase 220-240V / 50Hz three-phase 230-400V / 50Hz APPLICATIONS Self-priming centrifugal pump for suctions up to 27 meters, reached through the use of the ejector (optional) to be introduced in wells of 4" or diameter greater. Used for the water supply of farmhouses and small agriculture. CONSTRUCTION CHARACTERISTICS OF THE PUMP Pump: Body and motor support in cast iron. Technopolymer impeller and diffuser. Stainless steel shim ring. Mechanical seal in carbon/ceramic. Ejector: Cast iron body. Venturi tube in technopolymer A and brass nozzle. The ejector is available in three models (E 20 - E 25 - E 30) depending on the performance required. CONSTRUCTION CHARACTERISTICS OF THE ENGINE Rotor mounted on greased-for-life and oversized ball bearings. Built-in thermo-amperometric protection and capacitor permanently inserted in single-phase motors. For the protection of the three-phase motor it is recommended to use a motor protection switch in compliance with the norms. Construction according to CEI 61-69 (EN 60335-2-41) standards. Self-priming centrifugal pump for suctions up to 27 meters, reached through the use of the ejector to be introduced in wells of 4” or greater diameter. Used for the water supply of farmhouses and small agriculture. Operating range: up to 4.3 m3/h. Liquid temperature range: from 0°C to +35°C domestic use (EN 60335-2-41). from 0°C to +40°C for other uses. Self-priming: up to 27 metres. Maximum working pressure: DP 82 - DP 102 6 bar (600 kPa). DP 151 - DP 251 8 bar (800 kPa). Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model: FEKA VS 1200 MA single-phase Power supply: 1 x 230V~50Hz Power: 1.2kW (1.6HP) Capacitor capacity: 30mF Operating range: flow rate up to 400 l/min (24 m3/h) with heads up to 14 metres. DAB PUMPS There is a name in the electric pump sector that has been synonymous with high technology and reliability all over the world for over 30 years. This name is DAB, a company that has been designing and building electric pumps since 1975 with a very specific viewpoint: that of responding to the increasingly demanding market demands not only with products that attest to the highest levels of quality, but also with an efficient service and versatile. 35 years of experience and innovation Founded in 1975 in Veneto, DAB PUMPS SpA is today an international point of reference in the water handling sector. Its core business concerns the design, production and sale of electric hydraulic pumps able to satisfy any need for any type of domestic and professional application. A network as big as the world During its 35 years of constant growth, DAB PUMPS has also developed a sales network and technical assistance centers which provide widespread coverage of the national and international market. In addition to its 5 production plants located in Italy, the corporate structure is made up of 9 foreign branches and numerous distributors all over the world. The most reliable products With over 2 million pieces produced every year, DAB PUMPS electric pumps have become synonymous with high technology and reliability. DAB has a very wide range of water pumps, suitable for every need, made with cutting-edge materials that make them increasingly resistant to internal and external stresses, capable of guaranteeing high performance, quality and resistance over the long term, limiting the environmental impact. DAB pumps are the result of continuous research and technology, elements that try to offer flexible and easy-to-use solutions in every field of application. The specific attention that the company places on the materials and the homologation procedures to which each line is subjected before the production release, allows DAB PUMPS to simultaneously ensure the highest degree of resistance and the maximum performance of its products. General characteristics FEKA VS Submersible pumps WASTEWATER LIFTING Submersible pump in stainless steel with vortex impeller in precision cast steel. Suitable for wastewater and residential sewage containing solids up to 50mm in size. Handle covered in insulating rubber. Motor shaft in AISI 316 stainless steel. Double mechanical seal with interposed oil chamber (non-toxic oil), in carbon/alumina on the motor side and silicon carbide/silicon carbide on the pump side. Seal holder cover, motor case, cap with handle in stainless steel. Construction features of the pump Pump body, seal holder cover, motor casing, cap with handle in AISI 304 stainless steel. Impeller in precision cast steel. Handle covered in insulating rubber. Motor shaft in AISI 316 stainless steel. Double mechanical seal with interposed oil chamber (non-toxic oil), in carbon/alumina on the motor side and silicon carbide/silicon carbide on the pump side. Engine construction features Dry motor, asynchronous type, watertight, cooled by the pumped liquid. Rotor mounted on greased-for-life ball bearings, oversized and selected to ensure low noise and durability. Standard thermo-amperometric protection for the single-phase version, provided by the user for the three-phase version. Capacitor permanently inserted in the single-phase version. Continuous service with liquid at 35 °C and totally immersed pump. The single-phase version can be supplied with a float for automatic operation. Power cable: 10 meters H07RN-F, with plug for the single-phase version. Number of poles: 2 Max starts/hour: 20 Series features: Operating range: from 0 to 32 m3/h with head up to 14 metres. Pumped liquid: sewage and used water in general, however non-aggressive. Free passage: 50 mm Liquid temperature range: - from 0°C to +35°C for domestic use (EN 60335-2-41) - from 0°C to +50°C for other uses Maximum ambient temperature for pump operation with the motor surfaced: +40°C Maximum immersion depth: 7 meters Motor protection degree: IP 68 Insulation class: F Series voltage: 220-240V~ 50Hz Single-phase 380-415V~ 50Hz Three-phase Power cable: 10 meters H07RN-F, with plug for the single-phase version Installation: fixed or portable, vertical Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model Self-priming centrifugal electric pump Dab Model DP 151 M Energy efficiency Operating range: up to 4.3 m3/h. Pumped liquid: clean, free from solid or abrasive substances, not viscous, non-aggressive, non-crystallised and chemically neutral, close to the water features. Liquid temperature range: from 0°C to +35°C domestic use (EN 60335-2-41). from 0°C to +40°C for other uses. Maximum ambient temperature: +40°C Maximum working pressure: DP 82 - DP 102 6 bar (600 kPa). DP 151 - DP 251 8 bar (800 kPa). Installation: fixed in horizontal position. Special executions on request: other voltages and/or frequencies. Motor protection degree: IP 44 Degree of protection on the terminal block: IP 55 Insulation class: F Series voltage: single-phase 220-240V / 50Hz three-phase 230-400V / 50Hz APPLICATIONS Self-priming centrifugal pump for suctions up to 27 meters, reached through the use of the ejector (optional) to be introduced in wells of 4" or diameter greater. Used for the water supply of farmhouses and small agriculture. CONSTRUCTION CHARACTERISTICS OF THE PUMP Pump: Body and motor support in cast iron. Technopolymer impeller and diffuser. Stainless steel shim ring. Mechanical seal in carbon/ceramic. Ejector: Cast iron body. Venturi tube in technopolymer A and brass nozzle. The ejector is available in three models (E 20 - E 25 - E 30) depending on the performance required. CONSTRUCTION CHARACTERISTICS OF THE ENGINE Rotor mounted on greased-for-life and oversized ball bearings. Built-in thermo-amperometric protection and capacitor permanently inserted in single-phase motors. For the protection of the three-phase motor it is recommended to use a motor protection switch in compliance with the norms. Construction according to CEI 61-69 (EN 60335-2-41) standards. Self-priming centrifugal pump for suctions up to 27 meters, reached through the use of the ejector to be introduced in wells of 4” or greater diameter. Used for the water supply of farmhouses and small agriculture. Operating range: up to 4.3 m3/h. Liquid temperature range: from 0°C to +35°C domestic use (EN 60335-2-41). from 0°C to +40°C for other uses. Self-priming: up to 27 metres. Maximum working pressure: DP 82 - DP 102 6 bar (600 kPa). DP 151 - DP 251 8 bar (800 kPa). Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model : Kit 2 E.SYBOX + E.SYTWIN Product code : 60170272 Power supply : 1 x 220 - 240V ~ 50Hz Power : 1.55 lW (2.1 HP) Weight : 66Kg Operating range : Flow rate up to 120 l/min, head up to 65 metres Pumped liquid: Clean, free from solid or abrasive substances, non viscous, non aggressive, non crystallized and chemically neutral Liquid Temperature Range : From 0°C to +35°C for domestic use From 0°C to +40°C for other uses Maximum suction depth: 8 meters Maximum Ambient Temperature: +50° C Maximum working pressure: 8 bar (800 kPA) Motor Protection Degree: IPX4 Insulation class : F Installation : Fixed horizontal or vertical position Special versions on request: Other types of electric plug on request E. sybox We imagined e.sybox following our idea of ​​ergonomic technology* and we designed it so that it could enclose and express all the technological know-how of DAB based on 37 years of experience in the mechanical and electronic sector The result of this work is a PATENTED system unique in its kind, efficient, compact, easy and satisfying to use both for the installer and for the end user All these features make e.sybox the most advanced ergonomic system in the world in the field of water pressurization in domestic and residential environments E.sybox is first of all an integrated electronic system equipped with inverter technology, each component has been developed to make the most of it with minimum effort, bringing innovation to the service of simplicity. all enclosed in a "box" with a typically Italian design Inverter Electronic Board Thanks to the Inverter technology, the e.sybox absorbs the necessary energy according to the water requirement, thus avoiding useless waste and allowing for significant economic savings sensors The new compact electronic pressure transducer with integrated temperature sensor developed by DAB, together with the flow sensor both positioned on the pump delivery, send the necessary signals to the electronic board to adequately control the system Internal Hydraulic Connections Designed to minimize overall dimensions, they guarantee compactness to the system and make maintenance easier Expansion vessel Integrated into the system, it has a capacity of 2 liters and is certified for drinking water. Guaranteed for 5 years without the need for maintenance Installation The features and design of e.sybox make it a system that is easily adaptable to any type of installation. Horizontal or vertical, in a ventilated room or in a recess, any environment will be perfect for making the most of the e.sybox. which guarantees a reduction of at least 30% of the overall dimensions compared to any other traditional system EXTERNAL CONNECTIONS Covered by caps equipped with a gasket. Easy to remove, they allow you to choose which system inputs and outputs to use depending on the installation DISPLAY Adjustable high resolution 70x40 mm LCD to adapt readability to the various installations. The intuitive interface allows you to access all the information and customize the main settings according to the specifics of the application TECHNICAL ROOM Allows easy access to rotor shaft, vertical filler cap and expansion tank. It is also a practical housing for maintenance tools and the user guide, functional to the use of the system MOTOR New highly corrosion resistant water-cooled engine. Allows the system to be installed in a recess NON-RETURN VALVE ON DELIVERY Allows both horizontal and vertical installation of the system. It is easily removable for easier maintenance PROTECTION AGAINST FREEZING OF WATER IN THE SYSTEM (ANTI FREEZE) E.sybox is equipped with a protection that prevents the formation of ice inside by activating the electric pump in the event that the temperature drops to values ​​close to freezing QUIET AND COMFORTABLE Every detail of E.sybox has been taken care of with the utmost attention to guarantee levels of comfort that set new reference standards in the sector Simply connect the e.sybox to the electrical outlet to have all the water you need available when you need it The perceived noise as well as the vibrations are minimized with a silence of only 45 dB in standard use DAB HYDRAULICS Self-priming multistage up to 8 m MOTOR The new water-cooled motor eliminates the noise generated by traditional cooling fans INVERTER ELECTRONICS The new variable speed electronics ensures constant pressure in relation to the flow rate. The systems with inverter technology are less noisy than the traditional on/off ones because they adjust the motor revolutions according to need and are also equipped with gradual start-up and shutdown CARENE in ABS material enclose the system with a protective and sound-absorbing function ANTI-VIBRATION FEET They ensure effective absorption of vibrations making e.sybox even more silent and comfortable. They are designed for horizontal and vertical installation of the system ACCESSORIES With E.sybox the accessories become real functional components, ergonomic extensions of the product. E.sydock, E.sytwin and E.sywall have been developed to provide a new installation and use experience E.SYTWIN is the evolution of e.sydock, of which it maintains all the benefits for creating groups with two pumps. It offers exceptional performance thanks to the possibility of combined operation, with dimensions reduced by 50% compared to any other equivalent traditional system. 1"¼ NPT inlet and outlet can be configured on either side of the e.sytwin to make connection to piping as easy as possible A BETTER AND LONGER LIFE E.sytwin guarantees constant water supply to the home thanks to the BACKUP function. The new software algorithms constantly analyze the functioning of the system, thus optimizing the alternating use of the two units. MORE POWER, LESS ENCUMBRANCE E.sytwin offers exceptional performance thanks to the possibility of combined operation, with dimensions reduced by 50% compared to any other equivalent traditional system ALL THAT YOU NEED the wireless interface manages the communication between the two units, e.sydock ensures the hydraulic connection and it is thanks to this technology that e.sytwin does not require any other additional component for its installation and operation. Functionality of the group viewable on each individual display Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model: FEKA VS 550 MA single-phase Power supply: 1 x 230V~50Hz Power: 0.55kW (0.75HP) Capacitor capacity: 20mF Operating range: flow rate up to 300 l/min (18 m3/h) with heads up to 7.4 metres. DAB PUMPS There is a name in the electric pump sector that has been synonymous with high technology and reliability all over the world for over 30 years. This name is DAB, a company that has been designing and building electric pumps since 1975 with a very specific viewpoint: that of responding to the increasingly demanding market demands not only with products that attest to the highest levels of quality, but also with an efficient service and versatile. 35 years of experience and innovation Founded in 1975 in Veneto, DAB PUMPS SpA is today an international point of reference in the water handling sector. Its core business concerns the design, production and sale of electric hydraulic pumps able to satisfy any need for any type of domestic and professional application. A network as big as the world During its 35 years of constant growth, DAB PUMPS has also developed a sales network and technical assistance centers which provide widespread coverage of the national and international market. In addition to its 5 production plants located in Italy, the corporate structure is made up of 9 foreign branches and numerous distributors all over the world. The most reliable products With over 2 million pieces produced every year, DAB PUMPS electric pumps have become synonymous with high technology and reliability. DAB has a very wide range of water pumps, suitable for every need, made with cutting-edge materials that make them increasingly resistant to internal and external stresses, capable of guaranteeing high performance, quality and resistance over the long term, limiting the environmental impact. DAB pumps are the result of continuous research and technology, elements that try to offer flexible and easy-to-use solutions in every field of application. The specific attention that the company places on the materials and the homologation procedures to which each line is subjected before the production release, allows DAB PUMPS to simultaneously ensure the highest degree of resistance and the maximum performance of its products. General characteristics FEKA VS Submersible pumps WASTEWATER LIFTING Submersible pump in stainless steel with vortex impeller in precision cast steel. Suitable for wastewater and residential sewage containing solids up to 50mm in size. Handle covered in insulating rubber. Motor shaft in AISI 316 stainless steel. Double mechanical seal with interposed oil chamber (non-toxic oil), in carbon/alumina on the motor side and silicon carbide/silicon carbide on the pump side. Seal holder cover, motor case, cap with handle in stainless steel. Construction features of the pump Pump body, seal holder cover, motor casing, cap with handle in AISI 304 stainless steel. Impeller in precision cast steel. Handle covered in insulating rubber. Motor shaft in AISI 316 stainless steel. Double mechanical seal with interposed oil chamber (non-toxic oil), in carbon/alumina on the motor side and silicon carbide/silicon carbide on the pump side. Engine construction features Dry motor, asynchronous type, watertight, cooled by the pumped liquid. Rotor mounted on greased-for-life ball bearings, oversized and selected to ensure low noise and durability. Standard thermo-amperometric protection for the single-phase version, provided by the user for the three-phase version. Capacitor permanently inserted in the single-phase version. Continuous service with liquid at 35 °C and totally immersed pump. The single-phase version can be supplied with a float for automatic operation. Power cable: 10 meters H07RN-F, with plug for the single-phase version. Number of poles: 2 Max starts/hour: 20 Series features: Operating range: from 0 to 32 m3/h with head up to 14 metres. Pumped liquid: sewage and used water in general, however non-aggressive. Free passage: 50 mm Liquid temperature range: - from 0°C to +35°C for domestic use (EN 60335-2-41) - from 0°C to +50°C for other uses Maximum ambient temperature for pump operation with the motor surfaced: +40°C Maximum immersion depth: 7 meters Motor protection degree: IP 68 Insulation class: F Series voltage: 220-240V~ 50Hz Single-phase 380-415V~ 50Hz Three-phase Power cable: 10 meters H07RN-F, with plug for the single-phase version Installation: fixed or portable, vertical Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model Dab Submersible Electric Pump Model Nova Up 600 M-NA For Draining Clear Water For Domestic Use Energy efficiency Operating range: from 1 to 15 m3 /h with heads up to 10 metres. Liquid temperature range: from 0°C to +35°C for domestic use. Pumped liquid: cloudy water without fibers Minimum draft depth: NOVA UP 300 MA 120 mm NOVA UP 300 M-NA 60 mm NOVA UP 600 MA 165 mm NOVA UP 600 M-NA 70 mm Maximum immersion: 7 meters. Installation: vertical, fixed or portable. Degree of protection: IP68. Insulation class: F. APPLICATIONS The submersible drainage pump with vertical delivery is suitable for domestic use of stationary applications with automatic operation, for draining basements and garages subject to flooding. Thanks to its compact and handy shape, it also finds particular application as a portable pump for emergencies such as: drawing water from tanks or rivers, emptying pools and fountains or excavations and underpasses. Also suitable for gardening and hobby work in general. This pump can be used with liquids containing sized bodies solid up to 10mm. The level switch allows a fixed installation guaranteeing its automatic operation. Equipped with a removable filter, it sucks down to a minimum of 2/3mm (with filter removed). CONSTRUCTION CHARACTERISTICS OF THE PUMP Pump body, impeller, cap and suction grille in water-resistant technopolymer. Motor, rotor shaft and screws in stainless steel. Triple seal with interposed rings with pre-oil chamber. CONSTRUCTION CHARACTERISTICS OF THE ENGINE Continuous service asynchronous submersible type. Stator inserted in a stainless steel hermetic casing and covered by a cap that encloses wiring, microswitch and capacitor. Rotor mounted on greased-for-life and oversized ball bearings to guarantee silence and durability. Thermo-amperometric protection built-in and permanently inserted capacitor. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Dab EvoPlus B 150/250.40 M electronic circulator EVOPLUS circulators they can be used in heating, ventilation and air conditioning systems for residential and commercial buildings such as offices, condominiums, hospitals and schools. The EVOPLUS line consists of a complete range of circulators , with a maximum flow rate up to 75.6 m3/h and maximum head up to 18 m3. they are equipped with fl anged ports up to DN 100 in single and twin versions. INTELLIGENT PRODUCT Choosing Evoplus means saving while respecting the environment. Evoplus is an innovative product because it was designed to really improve life: cutting-edge components and electronics guarantee high performance, low consumption and simple and immediate usability. The impact on the environment is significantly reduced, with a real reduction in consumption of over 70% compared to the old circulators. Evoplus: technological intelligence and eco-friendly design at your service. Evoplus: technological intelligence and eco-friendly design at your service Technology and integrated electronics guarantee constant optimization of the operating regime which eliminates waste and lengthens the life cycle of a product designed to last over time. Speed ​​and power are determined by the specific performance request, allowing an action that is always effective and effi cient, personalized in all application contexts. Simple and usable technology Evoplus simplifies the installation, maintenance and control processes, with savings in terms of time and costs which confirm the competitiveness of the entire range. • ease of installation thanks to the elimination of the by-pass in the system • clear and intuitive interface guaranteed by an easy and clear display for viewing the operating status, which favors the practical selection of the regulation mode • constant control ensured by the remote control function which allows interactive, easy and immediate management, at any time and from any location SUSTAINABLE Eco-compatibility is a strategic choice and a mandatory requirement, thanks to the Erp Ecodesign Directive. Evoplus circulators with an efficiency technology oriented towards respect for the environment, today offer a safe change, with a view to sustainable and aware development. The Erp "Eco-design" 2009/125/EC regulation: involves all "energy-related products" and aims in various steps to direct the market towards the diffusion of high-efficiency "intelligent" products. Implementation step of the Regulation: • From 1 August 2015: the EEI limit value will be further lowered to 0.23 also for pumps integrated in heat generators and solar stations. • From 1 January 2020: the validity of the limit value EEI 0.23 will also apply to the replacement of pumps integrated in existing heat generators TECHNICAL DATA Operating range: from 3 to 75.6 m³/h with head up to 18 metres; Liquid temperature range: -10°C to +110°C Pumped liquid: clean, free from solids and mineral oils, non-viscous, chemically neutral, close to the characteristics of water. (glycol max 30%) Maximum working pressure: 16 bar (1600 kPa) Standard flanging: DN 32, DN 40, DN 50, DN 65, PN 6 / PN 10 / PN 16 (4 slots), DN 80 and DN 100, PN 6 (4 slots) Maximum ambient temperature: + 40°C. Minimum head pressure: the values ​​are shown in the relative tables. Special executions on request: DN 80 , DN 100 PN 10 / PN 16 (8 holes) Accessories (Counterflanges): PN 10 DN 32 - DN 40 - DN 50 - DN 65 PN 6 DN 80 - DN 100 Electromagnetic compatibility: EVOPLUS circulators comply with EN 61800-3 standard, in category C2, for electromagnetic compatibility. Electromagnetic emissions: residential environment (containment measures may be required in some cases). Conducted emissions: residential environment (in some cases they can be required containment measures) APPLICATIONS EVOPLUS electronic circulation pumps can be used in heating, ventilation and air conditioning systems for residential and commercial buildings such as: - Large residential buildings - Condominiums and blocks of flats - Homes - Clinics and hospitals - Schools - Office buildings - Real estate All models are available in both single and twin versions. Execution with bronze pump body for the recirculation of sanitary water, available in single version with flanged ports DN 32, DN 40, DN 50 and DN 65. Arranged as standard for control via external 0-10 v signal. or PWM and for connection to ModBus plant management systems (LonBus with special optional communication module). It is possible to remotely control the single version thanks to the Dconnect service (with Dconnect Box supplied separately) Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less