Technical features Model : Luna Alux 24 Ga ErP energy efficiency class (heating and DHW): A Load profile: XL DHW nominal heat input kW 24.7 Heating nominal heat input kW 20.6 Sanitary nominal thermal power kW 24 Energy efficiency (92/42/EEC) **** Efficiency at 100% Pn (80-60°C): 97.7% Efficiency at 100% Pn (50-30°C): 105.5% Expansion/pre-charge vessel capacity l/bar 8/0.8 Sanitary water temperature adjustment °C 35-60 Sanitary water production ∆T 25°C l/min 13.8 Degree of protection: IPX5D NOx class (EN 483) 5 Dimensions ( HxWxD ) : 763 x 450 x 345 mm Weight : 42Kg Power supply: LPG Wall-hung gas condensing boilers ideal for replacing old systems with cast iron/lamellar steel radiators The new condensing range Luna Alux is divided into two models, 24 and 33 kW for heating and instant domestic hot water production. Luna Alux was designed in compliance with the requirements of the Ecodesign and Labeling Directives. The labeling directive (2010/30/EU) requires the labeling of products according to a decreasing energy scale that goes from A++ to G starting from 09/26/2015 and from A+++ to D from 09/26/2019. The label was created to allow the final consumer, by providing true and comparable data, to make informed choices by targeting high-efficiency products. Exclusive design aluminum heat exchanger Luna Alux is the new Baxi condensing boiler equipped with a corrosion-resistant aluminum-silicon alloy exchanger which makes this boiler particularly solid. The exchanger, designed and produced on an exclusive Baxi design, has been studied with large water passage sections to make the boiler particularly suitable for replacement in old heating systems with cast iron or lamellar steel radiators In these types of systems, the replacement of the existing boiler with a new LUNA ALUX: Significantly lowers the risk of clogging due to impurities in the system water Makes operation particularly quiet The high water content inside the exchanger determines: Less temperature fluctuations Increased overheat protection More effective DHW pre-heating Furthermore, the exchanger can be inspected and this facilitates periodic maintenance Digital control panel The Luna Alux range of boilers is equipped with a digital control panel with backlit LCD display, easy to use thanks to dedicated and independent keys to adjust the temperature of the domestic hot water and the heating. The display allows you to view all the information and set the operating parameters in a clear and immediate way. Efficiency and savings Wide modulation range: Greater efficiency given by less switching on and off: with a high modulation ratio, the reduction of continuous switching on/off cycles leads to a significant reduction in consumption (by 8-10%) and an equal reduction in polluting emissions adjustment of the thermal power produced to the power dissipated thus avoiding excessive overheating/cooling of the premises Hydraulic group in brass Baxi has chosen to maintain quality in its components. The brass hydraulic group, in fact, is a guarantee of: Robustness Greater durability Recyclability Wide modulation range 1:7 greater efficiency given by fewer starts and stops: with a high modulation ratio, the reduction of continuous on/off cycles leads to a significant reduction in consumption (by 8-10%) and an equal reduction in polluting emissions • power adjustment produced at the dissipated power thus avoiding excessive overheating/cooling of rooms A Gas Adaptive Control The innovative GAC (Gas Adaptive Control) automatic combustion control system guarantees a wide modulation range up to 1:10: high efficiency and energy savings are ensured as the boiler is able to adjust the thermal power produced to the actual power dissipated from the building avoiding excessive heating/cooling of the building. High efficiency total modulation pump The Alux range is equipped with a high-efficiency, fully modulated circulation pump. The pump is equipped with a permanent magnet motor with a variable rotation speed controlled by the boiler board. The high efficiency total modulation pump allows: Lower electricity consumption Better performance Greater durability Characteristics: Wide modulation range 1:7 greater efficiency and silence GAC (gas adaptive control): automatic combustion control to constantly maintain the maximum efficiency values ​​(operation on methane only) High efficiency circulation pump with total modulation Aluminum-silicon alloy exchanger with large water passage sections Hydraulic group in brass 10 liter expansion vessel (mod. 33) Easy maintenance thanks to front access to components Digital control panel with large backlit LCD display Arrangement for combination with the Baxi integrated solar system Electronic system deaeration function to facilitate air removal during initial ignition Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

IMMERGAS VICTRIX ZEUS SUPERIOR 26 KW METHANE CONDENSING BOILER WITH BOILER COMPLETE WITH FUME EXHAUST KIT - NEW ERP Technical features Healthcare services: Useful thermal power for hot water production (kcal/h) 25.8 (22188) kW; DHW temperature °C 20 - 60: Sanitary pressure 2.5 bar: Withdrawal in continuous service (∆t 30°C) litres/min 13.1; Specific flow rate x 10 min. (∆t 30°C) litres/min 16.0; Boiler losses kW 0.174; Nominal expansion vessel capacity liters 2.0 (1.2) Power supply: METHANE Model: Wall mounted condensing boiler with 45 liter Boiler; Energy class in heating: A; Sanitary energy class: A; Sanitary load profile: XL; Heating power: 23.9 kW; DHW power: 25.8 kW; Hot water production (∆t 30 °C) l/min: 16.0 Nominal Current: 0.64A; Electrical insulation degree IP X5D; Heating performance: Nominal system expansion vessel capacity (min./max.): 10.0/7.1 L; Head available with flow rate 1000 l/h kPa (m wc) 26 (2.65); Benefits and functions: Display: backlit liquid crystal, provides the main operating information; It is possible to take advantage of the tax deductions in force; Low consumption, and can be combined as an optional with thermoregulators, which improve comfort and increase energy savings; 45 l kettle; Eco-compatible technology: in compliance with the ErP and ELD European Directives, it allows to achieve high energy efficiency classes in heating and hot water production; Ecological class 5: reduced emissions of nitrogen oxides. General characteristics Immergas boiler, easy to install in any environment and compatible with existing fittings and whirlpool tubs, designed to respect the environment while enjoying maximum comfort with low energy consumption given its low consumption circulator. Equipped with a 54-litre boiler made of stainless steel to be unalterable over time with minimal heat loss so as to resist even outdoors. The wide flange optimizes cleaning and maintenance operations, which allows excellent thermoregulation, guaranteeing very high performance in terms of comfort. Inside the boiler, in turn, there is a stainless steel coil wound in a double concentric spiral which ensures rapid heat exchange. The Zeus boiler is intuitive and simple to use and to program to your liking thanks also to the practical knobs and a backlit display that allow you to manage and view the boiler settings. Finally, given its great reliability not only in performance but also in resistance (IPX4D protection degree) it can be installed both indoors and partially covered outdoors. Dimensions (HxWxD): 900x600x460cm; Warranty The guarantee on this article is 24 months from the date of purchase.

Read more less

NB IN THE ABSENCE OF THIS PRODUCT, THE NEW MODEL WILL BE SUPPLIED : VICTRIX ZEUS 25! IMMERGAS VICTRIX ZEUS 26 KW LPG CONDENSING BOILER WITH BOILER - COMPLETE WITH FUME EXHAUST KIT - ERP Technical features Model: Wall mounted condensing boiler with 45 liter Boiler; Energy class in heating: A; Sanitary energy class: A; Sanitary load profile: XL; Heating power: 23.6 kW; DHW power: 26.0 kW; Hot water production (∆t 30 °C) l/min: 15.6  Nominal Current: 0.78A; Electrical insulation degree IP X5D; Heating performance: Nominal system expansion vessel capacity (min./max.): 8.0/5.8 L; Head available with flow rate 1000 l/h kPa (m wc) 31.0 (3.16); Healthcare services: Useful thermal power for hot water production (kcal/h) 32.0 (27,520) kW; DHW temperature °C 30 - 60: DHW pressure (min./max) 0.3/10 bar: Min. domestic hot water withdrawal 1.5 litres/min; Power supply: LPG. Benefits and functions: It is possible to take advantage of the tax deductions in force; Low consumption, and can be combined as an optional with thermoregulators, which improve comfort and increase energy savings; 45 l kettle; Eco-compatible technology: in compliance with the ErP and ELD European Directives, it allows to achieve high energy efficiency classes in heating and hot water production; Ecological class 5: reduced emissions of nitrogen oxides. General characteristics Immergas boiler, easy to install in any environment and compatible with existing fittings, designed to respect the environment while enjoying maximum comfort with low energy consumption given its low consumption circulator. Equipped with a 45 liter stainless steel boiler which allows excellent thermoregulation, guaranteeing very high performance in terms of comfort. The Zeus boiler is intuitive and simple to use and to program to your liking thanks also to the practical knobs and a backlit display that allow you to manage and view the boiler settings. Finally, given its great reliability not only in performance but also in resistance (IPX4D protection degree) it can be installed both indoors and partially covered outdoors. Dimensions (HxWxD): 890x580x380mm; Product Guarantee The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE PRODUCT IS NEW AND 100% WORKING, BUT HAS DENT ON THE TOP (SEE PHOTO NEXT TO THE MAIN IMAGE) NB The boiler will be supplied with methane, for LPG operation you must contact your local Authorized Assistance Centre. Technical features Model : Divacondens D Plus Nominal thermal power: 24 kW Power supply: methane Specifications Energy efficiency according to the European ErP directive Heating Energy Efficiency Class: B Seasonal Space Heating Energy Efficiency : 89% Performance Heating Thermal Capacity : 7,5 ~ 25,0 kW Heating Thermal Power: 7.2 ~ 24.2 kW Ultimate Thermal Efficiency 30% Pmin : 100.1% Domestic Hot Water Production 25°C Δt 30°C : 13,9 ~ 11,6 l/min NOx emissions 6 Dimensions and weight Dimensions (LxHxP): 400x700x330 mm Weight : 35Kg Ferroli Divacondens D Plus Boiler The Simplest Solution For A Condensing Boiler DIVACONDENS D PLUS is the condensing heat generator for traditional heating systems. The tried and tested Ferroli technology in the field of traditional wall mounted boilers has been enriched by increasing the performance of the product in the simplest way, with the use of a robust recuperator which preheats the primary circuit using the residual heat of the exhaust fumes and a new cooled burner with low NOx emissions. The Range Divacondens D Plus is offered in a single model for heating and instantaneous production of domestic hot water Characteristics > Condensing boiler for heating high temperature systems and producing domestic hot water. It is not suitable for combination with direct delivery to systems with low temperature radiant panels > Compact geometry primary exchanger > Instant production of domestic hot water with dedicated plate exchanger > Post-recovery of the latent heat of condensation, in function of pre-heating of the primary circuit > Forced draught sealed chamber boiler, with water-cooled atmospheric burner with low NOx emissions > Standard automatic hydraulic by-pass > Minimum polluting emissions (class 6 according to EN 15502-1) > High efficiency low consumption circulator (ErP - Class A) with anti-blocking system by activation for a few seconds every 24 hours of inactivity > Can be combined with the modulating remote timer control > Simple and complete control panel, display user interface, with setting keys > Robust post-condenser fed by the closed circuit of the primary. The heat exchange with the fumes takes place inside large diameter water passages. > Generator with simple and rational operation > ECO function in DHW for greater savings in the period of low use of hot water > Predisposition for solar systems: prearranged for the production of domestic hot water combined with solar panel systems > Place of installation: also for outdoors in a partially protected place down to -5°C as standard > Certified operation also with propane air (50% air - 50% G31) by means of a specific transformation to be requested from the Authorized Assistance Center > Also works on LPG with the use of a special conversion kit to be requested from the Authorized Assistance Centre Boiler control The DIVACONDENS D PLUS control unit consists of an easy-to-use interface with a backlit display. Using the buttons, it is possible to easily adjust the heating flow temperature, the domestic hot water setpoint, switch the generator on/off or activate the comfort function, monitoring the status of the boiler. The control panel is completed by a traditional pressure gauge which can check the system pressure at any time. The performances Energy classification DHW load profile (maximum flow rate at the corresponding efficiency declared in DHW) Efficiency in the production of domestic hot water FOR COMBINED BOILERS The "climate-energy 20/20/20" package sets ambitious targets for the reduction of greenhouse gas emissions, of energy consumption as well as the increase in the use of renewable energies, corresponding to a percentage of 20% to be reached by 2020. In this context, the European regulation ErP (Energy Related Products) introduces an energy classification also for water generators hot water for space heating and domestic hot water purposes. This classification translates into an energy label which must necessarily accompany all the products affected by the Regulation, introduced on the market from 26 September 2015. The labeling constitutes an easy guide for the consumer, who can choose - through standardized and objective indications - the product more efficient. In this way, the choice will be the most sparing in terms of consumption for the benefit of the user, but also the most virtuous for energy balances and consequently, for the environment. The most significant parameters indicated on the label are the seasonal efficiency index in heating and efficiency in the eventual production of domestic hot water, according to a scale which, in the case of the single boiler product, ranges from A to G*. Furthermore, for combined boilers, a load profile is indicated corresponding to the DHW flow rate of the appliance measured in a series of typical samplings, guaranteeing at least the declared DHW efficiency. This index is identified with a letter/”size” (S, M …XXL). Solar circuit integration DIVACONDENS D PLUS boasts electronics that simplify integration with thermal solar systems, both with natural and forced circulation. The microprocessor controls the temperature of the water coming from the solar circuit through the domestic hot water sensor and turns on the burner only if necessary. To reach the desired temperature, SUN EASY allows considerable savings even during the coldest seasons, exploiting and integrating even the smallest solar contribution, otherwise lost. In case of insufficient irradiation and therefore a modest pre-heating of the domestic water, the boiler will contribute with the heat necessary to reach the required set point temperature. If the sun and the solar system fulfill their "duty" no integration by the boiler will be necessary, the hot water will be conveyed to the tap, without the need for additional devices, with the mixing of the thermostatic valves. Safety and comfort ANTIFREEZE In the event that the temperature in the boiler drops to 5°C, the burner ignites automatically and the circulator is activated in order to protect the appliance from damage caused by frost. This function is active with the boiler powered by the gas circuit and under electrical voltage. POST-CIRCULATION This function makes it possible to recover all the heat supplied by thermal inertia of the exchanger and transfer it to the heating system, and consequently to the rooms to be heated. This is a timer function (customizable duration) and is active after the burner goes out in heating mode. SLIDING TEMPERATURE OPERATION With the installation of the “external probe” kit it is possible to operate the boiler in sliding temperature. This means that without using the system temperature adjustment keys, the boiler will self-regulate according to the variations in external temperatures. All this translates into energy savings while ensuring maximum comfort for the user. EASY CONTROL The electronic board of DIVACONDENS D PLUS adopts the Opentherm protocol. It allows the integration of other peripheral control units such as, for example, the ROMEO remote timer control. In fact, the Opentherm standard has been specially designed to share the logic and operating algorithms of the boiler with other additional control units. As a digital protocol, it allows total integration between the boiler and the satellite, with full control of the functions from the boiler and similarly from its satellite. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Unical KON X SLIM 35 C condensing boiler complete with low NOx methane fume exhaust kit - New Minimum/nominal useful power in condensing kW 4.6 ÷ 33.8 Heating efficiency class A Declared load profile XL Sanitary efficiency class A Efficiency at nominal thermal power in high temperature regime (Tr 60°C / Tm 80°C) η4 % 88.7 Production DHW cont. Dt 25 K (mixed) l/min 18.6 Total expansion vessel capacity l 6 IP X5D degree of protection NOx class 5 Dimensions HxWxD mm 800x520x180 KON X SLIM KONx SLIM is a condensing boiler running on methane or LPG, with instantaneous production of domestic hot water. Covered with a satin finish AISI 304 stainless steel casing, it is ideal for outdoor installations, but equally elegant indoors. KONx SLIM is: Performant 24 and 35 kW (Range rated) Modulation ratio 1:8 Low NOx class 5 High energy efficiency A+ (System) the top of the category, >98% Hs (superior calorific value) Insulated and protected IP X5D, suitable for outdoor installation according to current standards (up to -15°C with antifreeze kit) Extremely compact with its depth of only 18 cm, Unical's record among wall-hung condensing boilers KONx SLIM, thanks to the RCh chronothermostat, OT multiprogram modulator, connected to the ambient and external probes supplied as standard, reaches seasonal efficiency equal to energy class A+ in heating. HWS "Hot Water Speed" is the new KONx SLIM electronics that switches from heating to DHW function with burner and pump always active, considerably improving user comfort who does not have to wait for hot water. Covered with a satin-finish AISI 304 stainless steel casing with a tapered-edge casing finish, KONx SLIM appears to have an essential and very elegant line, combining, with its hi-tech style, with the other appliances in the house Super small size depth of only 18cm Management of 2 temperature zones (high/low) by applying a second on/off thermostat Sliding temperature programmed to operate with the lowest possible delivery temperature to help save energy Intelligent system filling to guarantee functionality If the pressure is below 0.4 bar in the system circuit, the automatic water filling starts for 30 seconds once a day. If the request is repeated several times, a warning signal appears on the remote control Anti-overheating post-circulation automatically after the burner goes out, the boiler keeps the pump running for 5 minutes, preserving the components Chimney sweep function allows maintenance technicians to carry out the checks required by current standards in terms of efficiency and emissions Multigas operation (natural gas or LPG) with simplified switching Double expansion tank If necessary, it can mount an external auxiliary expansion tank (optional) Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Unical KON1 28C kW Methane or LPG Condensing Boiler Complete with Fume Exhaust Kit, various colors available - NEW ErP Energy efficiency: Seasonal efficiency class for heating A Declared load profile: XL Sanitary seasonal efficiency class: A Technical data: Nominal useful power: 28.9 kW Seasonal heating energy efficiency ambient ηs 93% Useful thermal power in high temperature regime. (Tr 60 °C / tm 80 °C): 15.8 kW Efficiency at nominal thermal power in high temperature regime (Tr 60 °C / Tm 80 °C) η4: 88% Useful power at 30% of nominal heat output in low temperature regime (Tr 30 °C) P1 kW: 5.3 kW Efficiency at 30% of nominal thermal power in low temperature regime (Tr 30 °C) η1: 97.9% Annual electricity consumption QHE GJ: 49 Heating energy efficiency. of water ηWH: 85% Daily fuel consumption Qfuel : 23.05 kWh Sound power level indoors Lwa dB(A) 55.2 Annual electricity consumption AEC: 402 kWh DHW production in cont. Dt 25 K (mixed): 15.5 l/min Expansion vessel capacity: 10 l Heating circuit pressure (min-max): 0.5-3.0 bar DHW circuit pressure (min-max): 0.5-6.0 bar IP X5D degree of protection NOx class: 6 Dimensions (HxWxD): 810x450x345 mm; 41kg Gas transformation kit inside documentation envelope. KON1 KON1 is the latest among the "furnishing boilers" that Unical presents in synergy with the ArtÙ Design Studio. Soft lines and an elegant front, available in different colours, enclose a latest generation condensing boiler running on methane or LPG, with instantaneous hot water production up to 18 l/min. KON1 can also be installed with a completely hidden flue system. The range includes 3 powers: 24, 28 and 35 kW. The exclusive Unical system of both hydraulic connections and the totally disappearing smoke outlet, allows an elegant installation and integration of KON1 in both modern and classic environments, avoiding unsightly exposed pipes. HWS “Hot Water Speed” is the new electronics of KON1 which switches from heating to DHW function with burner and pump always active, considerably improving the comfort of the user who does not have to wait for hot water. Secondary exchanger In AISI 316L stainless steel - with 12 plates (mod. 24) - with 16 plates (mod. 28 and 35) Particularly efficient because it is suitable for condensing boilers by exploiting their low temperature. Its "ecological" project is distinguished by a new design of the plates which allows for the transfer of a greater quantity of heat by making the most of the characteristics of stainless steel. Outstanding modulation ratio up to 1:8 Efficiency >107% (ex dir. CE 92/42) ηs 93% (EU regulation 813/2013 - dir. ERP 2009/125/CE) Energy class A Primary exchanger in ultra-flat Al/Si/Mg Electronics with HWS “Hot Water Speed” function Low NOx class 6 (according to EN 15502-1) thanks to the modulating premix burner Hot water production up to 18.3 l/min Dt 25 with special heat exchanger Management of 2 temperature zones (high/low) by applying a second on/off thermostat "Pit stop" maintenance and convenient internal control panel for technical assistance interventions EASYr : remote control (standard) with chronothermostat functions, applicable wirelessly to the wall or free-standing with support High efficiency modulating circulator Prepared for future applications in systems and suitable to meet the requirements of the new installation standards No controls visible on the boiler, but EASYr (standard) which, without wires, performs the dual function of chronothermostat and remote control inside the home. Two-way radio frequency communications; Operating parameters control; Weekly programming; Room antifreeze function; Can be combined with external probe; Applicable to the wall or free-standing with support Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model : Full Condens EKOMB 28 Nominal thermal power: 28 kW Power supply: methane Heating Seasonal efficiency : 93% Energy efficiency class: A Rated Power: 6.9~22.8kW Maximum power consumption: 80W Domestic hot water Efficiency in ACS production : 87 % Energy efficiency class : A (XL) Nominal heat input : 7.1 ~ 28.0 kW Seasonal efficiency: 93.8% Withdrawal in continuous service (ΔT = 30°C): 12.5 l/min Withdrawal in continuous service (ΔT = 25°C): 15 l/min Minimum withdrawal : 1.5 l/min Maximum power consumption: 55W Electrical data Emission class : NOx 5 Power absorbed by the circulator: 25 W Minimum electrical absorption: 2 W Dimensions and weight Dimensions (LxHxP): 830x577x650 mm Weight : 33Kg Simply Serene Guarantee To guarantee you maximum serenity, DAIKIN has studied "SIMPLY SERENIOUS", an extension of the guarantee up to the 5th year of life of your product, which provides for the subscription of a Scheduled Maintenance Plan with specialized Daikin technicians. Daikin Full Condens boiler Double condensing gas condensing boiler for heating and domestic hot water Why choose a condensing boiler? Daikin condensing boilers are a good solution for those wishing to replace an existing boiler with a more efficient alternative, saving on costs. Our portfolio includes boilers for every need, from the D2C, Full condens and Full Condens TOP wall-mounted boilers, to the GCU boiler with built-in thermal accumulator, to the A2 oil-fired floor-standing boiler. The new condensing boilers offer the advantages of condensation not only in heating but also in the production of domestic hot water. The heart of the condensing boilers is the innovative double circuit aluminum exchanger: the mains water is heated directly in the boiler body, bringing the combustion fumes to condense. Domestic hot water is produced up to 20% more efficiently than traditional condensing boilers. The higher the efficiency, the lower the consumption and the higher the savings! Comfort Daikin condensing boilers offer maximum comfort. They work optimally and reliably continuously, all year round, even in extreme weather conditions. For the production of domestic hot water, both Combi models are available, for instantaneous production, and models for coupling with domestic hot water tanks or Daikin Sanicube storage tanks. A solution for any need! Energy efficiency Condensing technology It is a technology that exploits the latent heat present in the combustion gas and allows to achieve high efficiencies The Benefits Guarantee Simply Serene Labor at no extra cost Free original spare parts Daikin warranty on repairs no extra costs for requests for intervention in the event of a breakdown under warranty The advantages of condensing in heating and domestic hot water production › Minimum operating costs thanks to the double circuit heat exchanger for condensing even in the production of domestic hot water › Easy, fast and space-saving installation thanks to the optional B-pack pre-assembled unit, containing all ancillary components Ease of installation and maintenance All components are accessible from the front and the required maintenance is reduced thanks to the Lambda Gx adaptive gas combustion system, a fully electronic gas-air combination. The Lambda Gx system is compatible with wall and floor standing units Minimum maintenance Thanks to the innovative double circuit aluminum exchanger, neither the plate exchanger nor the 3-way valve used by traditional condensing boilers are required for the production of domestic hot water. A smaller number of components translates into greater reliability and less and faster maintenance. Simplicity is its strength! Furthermore, having its own completely independent separate circuit, the production of domestic hot water is not interrupted in the event of a failure in the heating circuit Simple, reliable and efficient Copper pipe dedicated to the domestic hot water service Copper pipe dedicated to the heating service Aluminum flue gas heat exchanger in which the copper pipes are embedded Condensing during DHW service punctual efficiency up to 101.7% and 20% more efficient than a traditional condensing boiler on an annual basis. Better performance, lower consumption and greater savings Absence of 3-way valve and plate heat exchanger greater reliability and less maintenance. Anything that isn't there can't be broken DHW service independent of the hot water heating circuit that is always available, even for example in the event of a water circulator breakage Circulator active only during heating consumes only 55W electricity during the production of domestic hot water and extends the life of the water circulator Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Energy label specifications according to the European ErP directive Heating energy class: A Nominal thermal power (kW) 20 Noise level indoors (dB) 39 Domestic hot water profile / energy class: L/A Heat generator + climate control unit package label: A Characteristics of heating/DHW operation: Code: REB-KA2024FF Forced flow sealed chamber Nominal thermal power (kW) 19.5 Nominal heat input on Sanitary PCI (kW) 24.0 EN677 efficiency on PCI (80-60°C) (%) 96.1 EN677 efficiency on PCI (50-30°C) (%) 103.2 Marking of NOx pollution class 5 Expansion vessel content (l) 8 Heating maximum operating temperature (°C) 80 Domestic hot water delivery (ΔT=35°C) (l/min) 9.6 Domestic hot water delivery (ΔT=25°C) (l/min) 13.5 Dimensions (W x H x D) (mm) 440x660x280; 29kg Version: LPG Complete with Mirai Standard remote control I looked Domestic instantaneous condensing gas heat generator for heating and domestic hot water. Complete with intelligent digital Mirai Standard remote control with adjustment and self-diagnosis function. Advantages Energy class A. Climatic probe integrated inside Copper heat exchanger with large passage section Integrated siphon which, with the addition of granules, neutralizes the acidity of the condensate First ignition free of charge by an authorized technical assistance centre Rinnai Antifreeze as standard up to -20°C IPX5D protection Mirai Standard Command (Standard) The standard Mirai remote control is included as standard on MIRAI range-domestic boilers. Installable in the same room as the boiler or in another room according to your preferences, the thermostat is the brain of the boiler. Elegant in design, easy to use also thanks to the colored display, the control panel shows the operating temperature, the methods of use and allows you to easily adjust all the basic operating parameters of the boiler, such as the desired room temperature or that of the shower. It is possible to integrate the thermostat with a chronothermostat. Mirai WiFi (optional) Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

RIELLO RESIDENCE IN CONDENS 32 KIS LPG CONDENSING BOILER WITH FUME KIT + BUILT-IN UNIT - NEW ErP Technical features Product code: 20096732 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Firebox thermal power (heating): 30 kW Useful thermal power (sanitary): 32 kW Energy efficiency (92/42/EEC) **** Useful efficiency at Pn* (50°C-30°C): 104.7% Profit return 30% (47th return): 109.8% Sealed chamber, forced draught Quantity of hot water with Δt 25°C: 18.3 l/min Minimum domestic water flow rate: 2 l/min Dimensions (hxwxd) mm 785 x 553 x 268 ; 43kg Built-in dimensions (hxlxp) mm 1223 x 654 x 286 ; 24kg Electrical protection degree: IP X5D NOx class: 5 Power supply: METHANE RESIDENCE IN CONDENS Yield **** Low polluting emissions Aluminum condenser, with premix burner Heating only models and combined models For outdoor recessed installations Residence In Condens allows for the technological level and high performance of the Residence Condens indoor version to be concealed in the wall. The innovative Riello heat exchanger, completely made of seamless aluminum, is synonymous with efficiency and durability, resistant to system dirt, offers excellent head and high heat exchange. Thermoregulation is managed directly by the boiler board and via the external probe (accessory) it allows suitably adapting the temperature of the heating system to the external climatic conditions. Residence In Condens is available with powers from 25 to 32 kW. Characteristics: Modulation ratio 1:8 which allows the boiler to respond to all heat requests Self-modulating circulator, low consumption (IEE≤0.20) "Winter with Pre-heating" function: allows the DHW exchanger to be kept at the right temperature, reducing waiting times during withdrawal (instantaneous combined models only) Antifreeze function that protects the heating and DHW circuits down to -5°C (external and built-in versions) with the possibility of extending the protection down to -15°C (optional) The remote control panel (optional) allows you to manage the boiler directly from inside the home Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Heating energy class: A DHW energy class (domestic hot water): A (ErP) Nominal heat output: 23 kW Nominal heat input: 24.6 kW Sanitary nominal thermal power: 28 kW Useful thermal efficiency at nominal power 40/30 °C: 101% Useful thermal efficiency at 30% nominal load 40/30 °C: 109% Continuous sanitary production: 14.1 l/min Sanitary temperature range that can be set: 40/60°C Forced draft sealed chamber Declared load profile XL NOx class: 5 Degree of protection: IP X4D Methane gas General characteristics The new Beretta CerepurHM has an easy-to-use LCD display that can also be programmed comfortably from your smartphone by downloading the JunkersHome App from any system. It works through the 1.8 mod, giving comfort with low consumption. Delivered for outdoor installation, in a fairly protected place, in compliance with current legislation. Functions: Can be combined with solar thermal systems for DHW using the Solar Kit; Can be combined with solar thermal systems for heating and DHW integration; Suitable with Ø 60 mm drains. SolarInside-ControlUnit: solar optimization on/off; Modulating premix fan and burner; High efficiency primary heat exchanger, in aluminum and silicon alloy; Sanitary heat exchanger to condense also in DHW with increased plates; Heating side expansion vessel of 12 litres; Heating side filling cock; Can be combined with CR 100 or CW thermoregulators Modulating digital thermoregulator, with soft touch display that can be installed on the wall, with an elegant and refined design, managed by a smart and functional app; Dimensions (WxLxH): 350 x 440 x 840mm; 43kg

Read more less

ATTENTION ! The boiler will be supplied with methane, for the conversion to LPG and propane air, contact the area Thermotechnical Assistance. Technical features Model : Cerapur Modul Solar ZBS 30/210-3 SOE Product code : 7738100533 Installation : Indoor / outdoor Positioning : Standing / on the ground Power supply: methane Energy efficiency Heating energy efficiency class: A Water heating energy efficiency class: A Declared load profile : XL Seasonal space heating energy efficiency : 92% Performance Nominal heat input : 6.5 ~ 30 .0 kW Nominal heat output 40°/30° : 7.1 ~ 30.6 kW Rated heat output: 6.4~29.4kW Specific flow rate (∆T = 30 K) : 26.2 l/min Boiler capacity: 204 litres Useful efficiency 40°/30° : 103 ~ 109 % Useful efficiency 80°/60° : 98,5 % Heating expansion vessel capacity: 12 litres DHW expansion vessel capacity: 8 litres Solar expansion vessel capacity: 16 litres Fan residual head : 80 Pa NOx class : 6 Electrical protection degree : X4D Dimensions and weight Dimensions (LxWxH): 600x600x1860 mm Weight : 171Kg Floor-standing condensing boiler with integrated Cerapur Modul Solar stratified solar tank Compact solar system The solar system is really very compact, in fact, in about 0.4 m², there are all the components necessary for the construction of a solar thermal system for the production of domestic hot water (DHW). Collectors are excluded. Maximum sanitary comfort The boiler has been awarded, by the European Standard EN13203-1/2, the "3-star sanitary comfort", i.e. the maximum score obtainable by appliances for the production of domestic hot water. Robust and reliable boiler Robustness and reliability of the boiler are a guarantee, thanks to the primary exchangers made with a resistant Al-Si aluminum alloy. Guaranteed energy savings Savings in energy consumption are guaranteed up to an extra 10%, thanks to the intelligent stratification function of the 204-litre storage tank, with integrated exchanger. Characteristics Primary exchanger made with Al-Si aluminum alloy Compact solar system: in about 0.4 m² all the components necessary for the construction of a solar thermal system for DHW production, collectors excluded 3-star sanitary comfort: the maximum obtainable according to EN13203-1/2 thanks to the 200-litre stratified boiler Savings in energy consumption up to an extra 10% thanks to the intelligent management of the 200-litre stratified storage tank (with integrated solar exchanger) Connectivity via MB LAN2 module as an accessory Can be installed in any context thanks to the possibility of using fume exhaust systems with a diameter of up to 60 mm External installation, in a partially protected place, in compliance with current legislation Methane version convertible to LPG and Propane Air by means of the appropriate regulation, contact the Thermotechnical Assistance Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

BOILER SUPPLIED WITH CONVERTIBLE METHANE THROUGH A SERVICE CENTER Overview VAILLANT ecoTEC PLUS CONDENSING BOILER VMW 256/5-5 + vSMART WiFi COMPLETE WITH FUME KIT - NEW ErP 2015 LPG Cod. 0020222964ÿ Technical specifications For heating and domestic hot waterÿ Forced draft sealed chamber Nominal heat input in sanitarywarekW 25 ErP energy class (Heating and DHW): class A Stars of yield (according to Dir. 92/42CEE) - **** Domestic hot water production (T = 30K) 11.9 lt Domestic hot water comfort stars (prEN 13203) - *** Expansion tank capacity 10 l Massimcontenutd?Ó?water in plantl 180 Dimensions (hxpxl) mm 720 x 338 x 440 Total electric power/pump (max speed) W 80/35 NOx class - 5 Adjustable in wi-fi from smartphone ThermostatvSMART as standard Version:ÿLPGÿ Features list Vaillant condensing boilerÿ With the strategic plan 20/20/20, Europe has the goal of producing 20% ​​less CO2, using 20% ​​more renewable energy and consuming 20% ​​less primary energy. Tuttquestentril 2020. To achieve these objectives, the EU has issued the ErP Directive (energy related products) which specifies the minimum eco-design requirements for energy-using equipment, including energy efficiency. The world of heating will also be affected by this revolutionary change. In fact, from 2015 the energy efficiency of boilers will be based on new performance indexes that will take into account seasonal performance. Among the most significant changes in the new methodology for measuring seasonal efficiency are the introduction of different nominal temperatures, operation even at partial loads and in standby mode. The new methodology will make it possible to evaluate the performance of a boiler in real conditions, based on the level of efficiency calculated over an entire year. ecoTEC PLUS ecoTEC plus the excellence of wall-mounted condensing boilers minimum consumption, maximum efficiency and versatility TheÿecoTEC plus series, wall-mounted condensing boiler of the latest generation, conceived to guarantee maximum energy savings and maximum comfort and designed to satisfyÿthe requirements of European regulationsÿconcerning energy efficiency which will enter into force inÿSeptember 2015. In addition, all the new products and systems for heating and water production hot water heaters must be labeled with an indication of their energy efficiency class. TheÿecoTEC plusÿlabeling signals theÿclass A. ecoTEC plusÿreaches this result easily because, in addition to the typical elements of Vaillant boilers, it has new completely innovative components: the combustion management system (ELGA), which, skilfully mixing air and gas, results in a reduction in gas consumption, new electronics and the very high efficiency to ensure considerable savings in electricity. For example, the electricity consumption of the boiler in stand-by is less than 2Watt (less than half of a working radio). ecoTEC plusÿguarantees maximum comfort: the boiler supplies immediately available hot water without sudden changes in temperature. Thanks to its small dimensions (70 cm high, 44 cm wide and 35 cm deep)ÿecoTEC plusÿ can be easily installed on any wall. Today it is possible to install it outdoors where the climate is mild even in winter. ecoTEC plusÿhas, in fact, also an anti-gel device which allows it to resist up to temperatures that reach -5°C. The newÿsimple and intuitive design, thanks to the display with clear text and backlighting, makes the boiler functional, allowing the user easy setting and simple control. ecoTEC plus compatible with all Vaillant components and accessories already on the market. Features:ÿ Boiler ready for 2015 regulations ErP: class A Preheat DHWÿ *** DHW comfortÿ Antigel-5øC as standard **** Efficiency in heating Modulation 1:8ÿ Modulating pump (Class A) Primary heat exchanger Vasexpansion 10 lÿ ELGA combustion system transfer kit from methane propan supplied WiFi programming from smartphone tablet wherever you are with vSMART and App vSMART VaillantÿvSMARTÿ the advanced WiFi thermoregulation system that allows you to configure the comfort of your home at any time with a simple click on your smartphone tablet. The benefits of vSMART are not limited to convenience. Using andvSMART you drastically reduce the start/stop cycles of the boiler thus allowing you to save on gas and electricity and to extend the life of your appliance. vSMARTÿtransforms your smartphone tablet into a remote control system for your heating. Wherever you are and whatever you are doing, you will be able to control and adjust the comfort of your home in extremely intuitive mod-rapid using your WiFi network. Download the free ÿvSMARTÿapp from the tuStore. To download the App, simply enter the tuStore, search for vSMART and start the download. The Vaillant vSMART App is available for iOS and Android systems. vSMARTÿ Designed to ensure comfort and extreme ease of use. You can install it on the wall by connecting it to the electricity supply and place it where you prefer using common AA + batteries. Elegant and essential, it integrates perfectly into any environment. One device to save energy for others. With vSMART you can - Control heating and domestic hot water via App.ÿ - Have 30 pre-configured and customizable standard profiles available.ÿ - Monitor energy efficiency at all times.ÿ - Control the heating systems of several homes (e.g. two flats, two houses).ÿ - Check the historical data of temperature, mode and hours of operation.ÿ - Regulate the temperature based on climate data collected from the internet.ÿ - Quickly set the function or Away from home? or Antifreeze? for greater savings.ÿ - Take advantage of the self-learning function that recognizes your programming over time to make your life even easier. The new EU legislation Starting from 26 September 2015 it is no longer possible to produce traditional forced draft boilers. Instead, it will be possible to continue producing condensing boilers and traditional open chamber boilers equipped with high efficiency pumps and compliant with the new ErP requirements such as emission levels, noise levels and efficiency. In particular, the installation of traditional open chamber boilers will only be possible in replacement of old boilers installed in multi-family buildings which discharge fumes into branched collective flues (CCR). Products placed on the market before 26/09/2015 that do not comply with the requirements of the new directive, such as traditional forced draft boilers and boilers not equipped with a high efficiency pump, can still be purchased, sold and installed. ErP and ELD: what they mean and how they differ ErP: The EU has issued new obligations for Energy Using Products (ErP). The new directive, known as the Ecodesign directive, prescribes minimum efficiency requirements and emission limits for appliances that produce heating and domestic hot water. The Ecodesign directive addresses two relevant product categories for installers and retailers in the sector: -ÿCategory 1ÿIncludes space heating appliances: electric, gas, oil, combined boilers, heat pumps and cogenerators up to 400 kW. -ÿCategory 2ÿIncludes appliances for the production of domestic hot water: electric, gas, diesel, heat pumps for DHW, solar systems up to 400 kW and boilers up to 2000 litres. ELD:ÿIn addition to the ErP directive, the EU has also introduced a mandatory energy labeling for the same types of appliances up to 70 kW and boilers up to 500 litres. The energy labeling directive is called ELD and requires that new products and systems for heating and the production of domestic hot water are labeled with an indication of their energy efficiency class. By combining products and components, for example by adding a temperature control unit, the energy classification of the system can be increased, which will be calculated by the installer and indicated on the package label. 7 year guarantee The 7-year guarantee on new boilers is another excellent reason to offer Vaillant to your customers. In addition, know that by replacing a Vaillant boiler over 15 years old with a new generation one, the warranty extension will be provided free of charge by the Official Vaillant Technical Assistance Center against a maintenance contract. Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less