ATTENTION Possibility of propane supply by means of a simple regulation. For info, contact the local authorized assistance center in advance Hermann Saunier Duval MASTER CONDENS 31 kW condensing boiler with 42 liter methane or LPG boiler - NEW Heating efficiency class A Sanitary efficiency class - A Sanitary load profile - XL Heating Fireplace flow rate Qmin/max - 80/60°C kW 3.6 - 25.5 Sanitary Fireplace flow rate Qmin/max - 60°C kW 3.6 - 31.0 Specific flow rate (∆T = 25K) (EN13203) l/min 17.6 Dimensions mm (HxLxP) 892x470x582 MASTER CONDENS Wall mounted combined condensing boiler with integrated storage tank and Aquaspeed PLUS® system Limitless comfort. At the top of the range in terms of performance, sanitary comfort and optimization of consumption, the new Master Condens has a renewed design, flat casing to facilitate installation and an innovative touch-screen user interface. The improved Aquaspeed PLUS® technology, combined with the new FlameFit® gas-adaptable combustion system, guarantees exceptional sanitary comfort, while the two 21-litre boilers make Master Condens the ideal solution for large families and homes with several bathrooms, ensuring hot water reserve, immediately available. The new Smart Tank Loading function avoids unnecessary energy consumption: based on the user's daily needs recorded in the first few weeks, the boiler autonomously heats the water only when necessary. The range consists of three natural gas models of 26, 31 and 35kW, which can be converted to propane via simple electronic regulation. The hydraulic connections are unchanged from the previous version. Maximum sanitary comfort with the Aquaspeed PLUS® system Large quantities of hot water immediately available Temperature stability even with multiple simultaneous withdrawals New FlameFit® combustion technology Smart Tank Loading function High modulation up to 1:10 New 26kW model Modern design with touch-screen user interface New diagnostics and malfunction detection The new Master Condens range boasts exceptionally low consumption and is positioned at the top of the category both in terms of sanitary comfort and efficiency thanks also to the exclusive Aquaspeed PLUS ® system for the production of domestic hot water which allows for stable temperatures even in the event of large contemporary withdrawals for comfort at the highest levels. Innovation at the service of comfort. Aquaspeed PLUS® and integrated boilers: comfort is absolute Thanks to the implementation of the Aquaspeed PLUS® system and the two stainless steel boilers of 21 liters each, Master Condens guarantees exceptional sanitary comfort with extremely low gas consumption. The ideal solution to meet the need for large quantities of domestic hot water, the boiler is able to satisfy the simultaneous requests of multiple users while maintaining maximum stability of the temperature of the water supplied. By exploiting the principle of stratification, the two boilers are in fact able to supply up to 276 liters of water (ΔT = 30K) for ten minutes without temperature fluctuations: the water contained in the upper part of the first boiler is always kept hot and, in short time, the heat needed to reach the desired brewing temperature is transferred uniformly to the rest of the two interconnected boilers. FlameFit® technology: more efficiency, less consumption and emissions The innovative FlameFit® combustion technology with which all Master Condens models are equipped allows the boiler to be independently adapted to the different types and qualities of gas, always guaranteeing optimized and fully functioning safety. In fact, the flame control electrode detects the varied characteristics of the gas and automatically adjusts the parameters to ensure perfectly efficient combustion, adapting the operation of the boiler to the actual needs of the user, with consequent energy savings, reduction of consumption as well as polluting emissions . FlameFit® technology makes Master Condens ready to operate with any type of future gas, without the need for conversion kits. New touch screen user interface The interface of the new Master Condens features a modern digital touch display and has been designed to simplify boiler management by the user as much as possible. The symbology of the various keys and the "talking messages" that can be viewed on the display allow for a rapid understanding of the main functions and how to set parameters according to one's comfort needs. 4-star energy classification (92/42/EEC) with yields up to 109.5%; 3-star DHW comfort (EN 13203-1), thanks to the exclusive Aquaspeed PLUS® technology with DHW plate heat exchanger in stainless steel and double dynamic storage tank (42 litres). Solar Easy . All models in the Master Condens range are compatible with all solar systems. If solar radiation is not sufficient to keep the domestic water at the desired temperature, the boiler intervenes as an integration. Master Condens is compatible with the MiGo WiFi control unit . The wall-mounted boiler is ready to be managed remotely simply with a smartphone. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Fondital ISCHIA KC 28 kW condensing boiler complete with Low NOx Methane flue kit KIOI02KC28 - ErP KC 28 S CNG Class A space heating DHW heating A XL load profile Dimensions LxHxP 400x700x250 33.5 Nominal thermal power (Pnominal) kW 26 Seasonal space heating energy efficiency (ηs) % 92 Water heating energy efficiency (ηwh) % 80 Nominal heat input (Qn) kW 26.4 Nominal thermal power (80-60°C) (Pn) kW 25.5 Thermal power (50-30°C) kW 28.0 Reduced heat input (Qr) kW 3.3 Useful efficiency at nominal flow rate (80-60°C) % 96.7 Useful efficiency at nominal flow rate (50-30°C) % 105.9 Useful efficiency at 30% (30°C return) % 107.5 Heating expansion vessel capacity l 9 DHW nominal heat input kW 30.4 Specific sanitary flow rate ΔT=30K l/min 15.0 NOx emission class - 6 IP electrical protection degree IPX4D ISCHIA KC WALL-MOUNTED CONDENSING BOILER WITH INSTANT PRODUCTION OF DOMESTIC HOT WATER PLUS High domestic hot water production, more power during domestic hot water operation (28 - 30 kW) Class 6 of NOx emissions Modulation ratio 1:9 Multifunction relay for connection to systems with zone valves or external pump management or remote alarm signalling 9 liter expansion vessel High efficiency modulating circulator with built-in deaerator TECHNICAL FEATURES LCD user interface with diagnostics Management of 2 types of solar thermal system (with additional kit) Thermoregulation with external probe (optional) Compact, only 250 mm deep Arrangement for connection to the Remote Control (optional, supplied by the manufacturer) Programmable parameters to adapt the boiler to the installation and alarm history Automatic by-pass Heat exchanger in thermopolymers and stainless steel 3-speed circulator with built-in deaerator Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION The boiler will be supplied with methane. For LPG operation, the standard LPG conversion kit is supplied. Technical features Model : CLAS B ONE WIFI 24 Code: 3302127 Nominal heat input in heating max/min PCI : 22.0 / 3.3 kW Nominal heat input in DHW max/min PCI : 26.0 / 3.3 kW Power supply: methane Specifications Energy efficiency according to the European ErP directive Heating Energy Efficiency Class: A Sanitary Energy Efficiency Class: A Withdrawal profile: XL Combustion efficiency (flue gas) % 97.9 Efficiency at nominal heat input (60/80°C) PCI % 97.7 Efficiency at nominal heat input (30/50°C) PCI % 106.1 Efficiency at 30% at 30°C PCI % 109.8 Minimum efficiency (60/80°C) PCI % 95.6 health circuit Min/max DHW temperature °C 40 / 65 Specific flow rate in sanitary mode (10 min. with ΔT=30°C) l/min 18.8 Instantaneous quantity of hot water ΔT=25°C l/min 22.6 Instantaneous quantity of hot water ΔT=35°C l/min 16.1 Domestic water pressure max/min bar 7/0.2 Minimum withdrawal of hot water l/min 2 Dimensions and weight LEGEND A \ System delivery B \ Hot water outlet C \ Gas inlet D \ Cold water inlet E \ System Return Weight : 57.2kg Description Condensing boiler with integrated 40 l storage tank AUTO FUNCTION: Maximum comfort, efficiency and energy saving based on the automatic analysis of the environmental conditions, the connected external devices and the required performance. COMFORT FUNCTION: Speeds up hot water dispensing in two modes: Comfort Plus mode (always hot water in just 5'') and Comfort mode (hot water for 30' after the last tap). SYSTEM MANAGEMENT: New communication protocol designed to ensure complete system management. SUPER SILENCE: Silence in all operating modes. XtraTech™ heat exchanger in exclusive Ariston stainless steel, with high head Wifi integrated in the boiler Compatible with Ariston NET APP Modulation ratio 1:8 2 stainless steel stratification boilers of 20 lt Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE OPERATION OF THE METHANE OR LPG BOILER IS USED THROUGH THE STANDARD KIT. FOR INFO, CONTACT THE AUTHORIZED AREA ASSISTANCE CENTER IN ADVANCE Ariston condensing boiler CARES PREMIUM EXT 25 for outdoor methane or LPG complete with flue exhaust kit cod. 3301229 Product code: 3301229 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Heating/sanitary features: Nominal heat input max/min (heating) PCI: 23.5/5.5kW Nominal heat input max/min (sanitary) PCI: 23.5/5.5 kW Max/min useful heat output (heating): 22.9/5.3 kW Efficiency at nominal heat input (60/80°C) PCI: 97.5% Efficiency at nominal heat input (30/50°C) PCI: 103.9% Efficiency at 30% (30°C) PCI: 108.3% Max/min heating temperature (high temperature): 82-35°C Max/min heating temperature (low temperature): 45-20°C DHW max/min temperature: 60-36°C Quantity of hot water (deltaT 25°C): 12.6 l/min Quantity of hot water (deltaT 35°C): 9.0 l/min Specific flow rate (first 10' with deltaT 30°C): 10.5 l/min minimum operating temperature (with antifreeze kit) -15°C Power supply voltage/frequency V/Hz 230-50 Total absorbed electric power: 80W Degree of protection of the electrical system IP X5D Dimensions mm (HxWxD) 770 x 505 x 240 External installation Power supply: methane Functionality: Thermoregulation included: Sensys system manager + external probe CARES PREMIUM EXT Aluminum-silicon condensing exchanger Modulation ratio 1:4 BusBridgeNet® communication protocol Sensys system manager and standard external probe Minimum operating temperature down to -20°C* Electro-galvanized coat for outdoors Smoke outlet 80, 60 mm MET/LPG operation with standard kit (model 25) Comfort function Speeds up hot water dispensing in two modes: Comfort Plus Mode (always hot water in just 5") and Comfort Mode (hot water for 30' after the last draw). Auto function Maximum comfort, efficiency and energy savings based on the automatic analysis of the environmental conditions, connected external devices and required performance. Easy Installation Small footprint for easy installation. System management New communication protocol designed to ensure complete system management. High efficiency Product characterized by high energy performance, reduction of consumption and polluting emissions. Extra small size Extremely small footprint to adapt to any space problem. Made in Italy Made entirely in Italy. Modulating circulation Modulating circulator for optimizing consumption and maximizing performance. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

CAUTION Natural gas, LPG and propane air operation without the need for a kit. The transformation takes place thanks to the combustion control by selecting the type of gas from the technical menu. For info, contact the local authorized assistance center in advance Ariston condensing boiler ALTEAS ONE NET+ 24 kW A+ with Integrated Wi-Fi Methane or LPG voice control SENSYS HD as standard - NEW 3301771 Technical features Nominal heat input in heating max/min PCI 22.0 / 2.5 Nominal heat input in DHW max/min PCI kW 26.0 / 2.5 efficiency at nominal heat input (60/80° c) PCI (TBC) % 97.7 yield at 30% (30th c) PCI (TBC) % 109.8 NOx class Class 6 Maximum heating pressure 3 bar Expansion vessel capacity l 8 Supply voltage/frequency V/Hz 230/50 Minimum ambient temperature of use 2 °C > 0° Degree of protection of the electrical system IP X5D Energy class A+ (Achievable with standard thermoregulation accessory and web reference for external temperature) Energy class in sanitary A XL withdrawal profile Dimensions WxHxD mm 400x745x385 ALTEAS ONE NET+ Latest generation condensing boiler with integrated Wi-Fi and voice control. Compatible with hydrogen blends up to 20%. Voice Control With Alteas one net+ your voice is enough to manage the comfort of your home thanks to the integration of the Ariston Smart NET with Google Home and Alexa. H2Ready Compatible with hydrogen blends up to 20%. Ariston's important commitment to introduce hydrogen in heating. Class A+ Thanks to the integration of the standard SENSYS HD, it is possible to reach class A+ guaranteeing energy savings. Characteristics Patented XtraTech™ high head stainless steel heat exchanger Modulation ratio 1:10 Low NOx levels (24 mg/kWh) Silent operation (only 46 db(A) Mod. 24kW) Compatibility with natural gas, LPG and propane air without the use of kits Ignition Control System+, stable and safe performance Hydro Sensor System, constant monitoring of system pressure Flow Control System+, optimal balance of flow and comfort Integrated Wi-Fi and ARISTON NET connectivity as standard Tempered and scratch resistant glass panel Large LCD display with touch interface Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Riello Family AQUA CONDENS 3.5 condensing boiler with 60 lt boiler complete with flue gas exhaust kit - ErP ErP technical data Energy class A XL load profile Characteristics of exercise in SANITARY Nominal heat input kW 34.6 Nominal thermal power kW 34.6 Reduced heat input kW 3.5 | 6.2 Kettle water content l 60 Features exercise in sanitary Maximum heating pressure 3.0 bar Heating water content 4.3 l Expansion tank l 10.0 Electrical data Supply voltage V-Hz 230-50 IP X5D degree of protection Dimensions HxWxD mm 940x600x460 WATER CONDENS FAMILY AQUA CONDENS: LOTS OF HOT WATER FOR THE WHOLE FAMILY Family Aqua Condens is the condensing boiler which, thanks to the integrated 60-litre stainless steel storage tank, allows you to have a large availability of domestic hot water that is always ready; combines the advantage of immediately offering lots of hot water with energy savings that only condensing technology can achieve, guaranteeing high yields and low polluting emissions. Family Aqua Condens guarantees a large availability of domestic hot water and makes it possible to satisfy all the needs of medium and large domestic users, with two or more bathrooms, hydromassage tubs and to better manage simultaneous withdrawal requests. Family Condens combines excellent performance with a modern and refined design. The captivating user interface that allows access to the special Family functions and the lower connection cover give the boiler versatility and elegance. TECHNOLOGY KEEPING UP WITH SIMPLICITY All the parameters and special functions of the Family Condens boiler can be set and managed directly from the control panel with an original design and easy to use. The parameters and boiler operating status are displayed on the large digital display developed vertically. MEMORY KEY The machine intelligence is activated with the Memory key. - Heating memory: the delivery temperature is managed independently by the boiler to reduce heating times and limit sudden changes in temperature in the radiators. - Memory in DHW: the DHW usage habits are memorized with the Memory key; the boiler activates a water pre-heating process only when necessary and without waste. TOUCH&GO FUNCTION If the domestic hot water usage habits change, opening and closing the tap activates the instantaneous pre-heating which prepares the hot water only for that drawing. Reopening the tap after a few moments, hot water is immediately available. WELLNESS KEY By selecting the wellness button, the ideal water temperature for the shower is set, avoiding having to look for the right mix between hot and cold water. The temperature can be customized between 35 and 45°C at intervals of 0.5°C. INTELLIGENT FILLING WITH THE DROP BUTTON The flashing icon signals the need to fill the system before there is a total lack of water and the boiler blocks; by simply pressing the button, the automatic filling cycle is activated in total safety. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE OPERATION OF THE METHANE OR LPG BOILER IS USED THROUGH THE STANDARD KIT. FOR INFO, CONTACT THE AUTHORIZED AREA ASSISTANCE CENTER IN ADVANCE nb: optional body, to be selected in related products Ariston condensing boiler CARES PREMIUM IN 25 built-in methane or LPG complete with flue kit cod. 3301231 Product code: 3301231 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Nominal heat input max/min (heating) PCI: 23.5/5.5kW Nominal heat input max/min (sanitary) PCI: 23.5/5.5 kW Max/min useful heat output (heating): 22.9/5.3 kW Efficiency at nominal heat input (60/80°C) PCI: 97.5% Efficiency at nominal heat input (30/50°C) PCI: 103.9% Efficiency at 30% (30°C) PCI: 108.2% Max/min heating temperature (high temperature): 82-35°C Max/min heating temperature (low temperature): 45-20°C DHW max/min temperature: 60-36°C Quantity of hot water (deltaT 25°C): 12.6 l/min Quantity of hot water (deltaT 35°C): 9.0 l/min Specific flow rate (first 10' with deltaT 30°C): 10.5 l/min minimum operating temperature (with antifreeze kit) -15°C Power supply voltage/frequency V/Hz 230-50 Total absorbed electric power: 80W Degree of protection of the electrical system IP X5D Dimensions mm (HxWxD) 1140 x 590 x 240 Installation: Recessed Power supply: methane Functionality: Thermoregulation included: Sensys system manager + external probe CARES PREMIUM IN Aluminum-silicon condensing exchanger Modulation ratio 1:4 BusBridgeNet® communication protocol Sensys system manager and standard external probe Minimum operating temperature down to -20°C* Electro-galvanized coat for outdoors Smoke outlet 80, 60 mm MET/LPG operation with standard kit (model 25) Comfort function Speeds up hot water dispensing in two modes: Comfort Plus Mode (always hot water in just 5") and Comfort Mode (hot water for 30' after the last draw). Auto function Maximum comfort, efficiency and energy savings based on automatic analysis of the environmental conditions, connected external devices and required performance. System management New communication protocol designed to ensure complete system management. High efficiency Product characterized by high energy performance, reduction of consumption and polluting emissions. Extra small size Extremely small footprint to adapt to any space problem. Made in Italy Made entirely in Italy. Modulating circulation Modulating circulator for optimizing consumption and maximizing performance. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

THE BOILER IS BORN WITH METHANE. THEREFORE, YOU MUST REQUEST THE TRANSFORMATION KIT. FOR INFO, CONTACT THE AUTHORIZED AREA ASSISTANCE CENTER IN ADVANCE Technical features Model : EoTEC Plus VMW 236/5-3+ Product code : 0010034554 Power supply: LPG Performance Heating power : 5.2 ~ 23.0 kW Sanitary rated power : 5.2 ~ 23.0 kW Energy efficiency class in heating: A Sanitary energy efficiency class: A Sanitary load profile : XL NOx class : 5 Performance Stars : ★★★★ Domestic hot water production (ΔT = 30K) 11.0 l/min Domestic hot water temperature adjustment: 35°C ~ 65°C Modulation : 1:5 Expansion vessel capacity: 10 litres Installation data Flue connection diameter: 60/100 mm Possible diameter of flue gases : 60/100 - 80/125 - 80/80 - 60/60 Gas pipe diameter: 12.70 mm (1/2") Hydraulic piping diameter : 19.05 mm (G3/4") Dimensions and weight Dimensions (HxWxD): 720x440x338 mm Weight : 33Kg Warranty extension to 7 years Wall-mounted condensing boiler ecoTEC pro VMW + Reliable and flexible for Vaillant replacements on Vaillant All models in the VMW ecoTEC pro range feature etas = 94% efficiency. For this reason, if combined with a class VI thermoregulation, such as vSmart, they reach a system efficiency of 98% and therefore the ErP system energy class in heating A+ . The VMW ecoTEC pro boiler is available in 23 kW and 28 kW outputs. ecoTEC pro was born as the natural evolution of Vaillant's consolidated technology and experience in condensing technology. ecoTEC pro has been designed to offer the right balance between performance and comfort both in heating and in the production of domestic hot water. With the new high-efficiency pump and new electronics, ecoTEC pro consumes very little electricity, guaranteeing considerable savings throughout the year. Its simplicity of adjustment makes it the ideal boiler for all users, as well as having an extremely simple interface with plain text and backlit display for ease of use ecoTEC pro is the ideal wall-mounted combined boiler for Vaillant on Vaillant replacements thanks to its ease of installation and availability of accessories. Once installed, it will win you over with its extraordinary ease of adjustment The small size of ecoTEC pro VMW allows it to be installed in any environment: 70cm height 44cm wide 35cm deep Identical to the previous version Control the heating with your smartphone Thanks to its free App, vSMART represents a new approach to home efficiency, transforming smartphones or tablets into remote control systems and allowing ecoTEC Pro to be controlled and adjusted at any time, from anywhere, quickly and intuitively First ignition free Vaillant guarantees, through the work of its technicians, the free first ignition service on all wall-hung condensing boilers. ecoTEC Pro Comfort and simplicity within everyone's reach Solution for heating and domestic hot water Reduced installation costs Sanitary comfort even with low flow rates High efficiency pump Intuitive display and simplified adjustments Frost resistance -5°C Steel primary exchanger Combustion system Pneumatic Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

THE BOILER IS BORN WITH METHANE. THEREFORE, YOU MUST REQUEST THE TRANSFORMATION KIT. FOR INFO, CONTACT THE AUTHORIZED AREA ASSISTANCE CENTER IN ADVANCE Technical features Model : EcoTEC Pure VMW 246/7-2 Product code : 0010019985 Power supply: LPG Performance Heating power : 7.5 ~ 24.0 kW Sanitary rated power : 7.0 ~ 28.0 kW Energy efficiency class in heating: A Sanitary energy efficiency class: A Sanitary load profile : XL NOx class : 5 Performance Stars : ★★★★ Domestic hot water production (ΔT = 30K) 13.5 l/min Domestic hot water temperature adjustment: 35°C ~ 60°C Modulation : 1:4 Expansion vessel capacity: 8 litres Installation data Flue connection diameter: 60/100 mm Possible diameter of flue gases : 60/100 - 80/125 - 80/80 - 60/60 Gas pipe diameter: 12.70 mm (1/2") Hydraulic piping diameter : 19.05 mm (G3/4") Dimensions and weight Dimensions (HxWxD): 720x440x335 mm Weight : 30.8Kg Warranty extension to 7 years EcoTEC Pure VMW wall-mounted indoor condensing boiler The simplest that adapts to everyone's needs The new ecoTEC pure design immediately recalls the quality and reliability that characterize Vaillant's DNA. Indoor condensing boiler with Vaillant standard measurements 72 cm high, 44 cm wide and 33 cm deep. ecoTEC pure was designed with the intention of offering the ideal solution for replacing traditional boilers, including those of other brands , thanks to the vertical hydraulic connections, which guarantee great flexibility. A series of connection kits allow the rapid replacement of the atmo-turboBLOCK models. Ease of management thanks to a series of commands and a very simplified display , suitable for all types of customers. Vaillant has identified an innovative solution to prevent freezing of the condensate siphon, the element most sensitive to frost and thanks to the ecoLEVEL accessory it is possible to convey the condensate into the appropriate drains. The boiler features a new high-efficiency pump with high performance , a stainless steel exchanger and an 8-litre expansion vessel. Simply Vaillant Best value for money ecoTEC pure represents the ideal solution for anyone who wants to switch to Vaillant without worries because it is equipped with vertical connections that make installation quick and easy. Vaillant quality guarantees low consumption and good energy efficiency: the boiler is in class A both in heating and in DHW. The pure range consists of a single natural gas model with combined production. One kit allows you to switch to propane and propane air power. The boiler features a new thermo-hydraulic module equipped with a modulating pump to guarantee low electricity consumption while a new stainless steel exchanger and a wide modulation range up to 1:4 guarantee gas savings ecoTEC pure is the range dedicated to the replacement of boilers of other brands, possible thanks to the simplicity of the vertical connections and ease of use. First ignition free Vaillant guarantees, through the work of its technicians, the free first ignition service on all wall-mounted condensing boilers. ecoTEC pure the easiest way to switch to Vaillant condensing Solution for heating and domestic hot water Complete range of accessories for replacing traditional boilers Reduced consumption thanks to the high efficiency pump Simplicity of management Small size Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

URBIA ADVANCE LINK 35 kW Chaffoteaux condensing boiler free flue kit with 4 liter micro-accumulator Integrated Wi-Fi - ErP Reference 3310610 MET/LPG/AP gas Energy class in heating A Energy class in sanitary A Pickup profile XXL Weight 42kg Dimensions (Height x Width x Depth) 745 x 440 x 460 mm ENERGY PERFORMANCE Nominal heat input in heating max/min (Hi) Qn 31 / 3.5 kW kW Nominal heat input in heating max/min (Hs) Qn 34.4 / 3.9 kW Nominal DHW heat input max/min (Hi) Qn 34.5 / 3.5 kW Max/min DHW nominal heat input (Hs) Qn 38.3 / 3.9 kW Heating output max/min (80°C-60°C) Pn 30.2 / 3.3 kW Heating output max/min (50°C-30°C) Pn 33,1 / 3,7 kW DHW max/min useful power Pn 33.1 / 3.4 kW Efficiency at 30% of Qn with return to 30°C Hi/Hs 106.9 / 96.3% Performance stars (dir. 92/42/EEC) **** SANITARY CIRCUIT Min/max DHW temperature 40 / 65 °C Instantaneous amount of hot water ?T=25°C 20.1 l/min Sanitary comfort stars (EN13203) *** ELECTRICAL DATA Power supply voltage/frequency 230 / 50 V Total absorbed electrical power 89.9 W Degree of protection of the electrical system IP X5D URBIA ADVANCE LINK Urbia Advance Link represents the perfect mix between sanitary comfort and reduced consumption. It stands out for its 4-litre micro-accumulator, electronic combustion control and integrated Chaffolink connectivity and standard Expert Control. MAXIMUM PERFORMANCE: SPINTECH New single coil primary heat exchanger in stainless steel. Passage sections increased by 142% compared to the previous version. 1 m more head. Seasonal yield at 94%. Class A+ reachable with thermoregulation. Performance certified by the TÜV RHEINLAND Group. MAXIMUM COMFORT Modulation ratio 1:10. Electronic combustion control E-Burning System. SRA function. Gas transformation from the technical menu without the need for a kit. Chaffolink connectivity integrated in the boiler. External temperature from the internet thanks to integrated connectivity. HEALTHCARE COMFORT Integrated mini-accumulator in 316L stainless steel of 4 liters. Domestic hot water performance ***, maximum level foreseen by the EN 13203 standard. Flow rate from 16.0 to 20.1 l/min with ?T = 25ºC. DHW production controlled by a modulating pump to respond to needs without waiting times and at a constant temperature, even when withdrawals are very small. DHW programmer to control the storage heating time slots. EASY INSTALLATION Installation in partially protected places. Smoke outlets 80, 60, 50 mm. Intuitive electrical connections. ENERGY SAVING AND RESPECT FOR THE ENVIRONMENT Up to 25% energy savings in combination with Expert Control and the SRA function. Up to 35% energy savings by combining Expert Control, the SRA function, the external probe and the radiant floor. Reduced polluting emissions, NOx class 6. Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Product code: 3310508 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency Class A Withdrawal profile: XL Characteristics of heating/DHW operation: Nominal heat input in heating max/min (Hi) : 23.5/4.5 kW Max/min DHW nominal heat input (Hi) : 23.5/4.5 kW Max/min heating thermal power (80°C-60°C): 23/4.4 kW Efficiency at nominal heat input: 97.7 / 88% Efficiency at 30% of the nominal heat input: 104.3 / 94% Expansion vessel capacity: 8 l Min/max heating temperature (high temperature range) °C 35/82 Min/max heating temperature (low temperature range) °C 25/45 DHW temperature min/max °C 36/60 Instantaneous quantity of hot water ΔT=25°C l/m 13.9 Instantaneous quantity of hot water ΔT=35°C l/m 9.9 Minimum withdrawal of hot water l/m <2 Electrical data: Supply voltage/frequency V/Hz 230/50 Total absorbed electric power W 34 Electrical protection degree IP X5D CX GREEN EU   The compact condensing boiler with aluminum alloy condensing exchanger and with all the necessary requirements to achieve the required standards in terms of energy saving. Operation only methane. Sanitary comfort Sanitary heat exchanger in stainless steel. Domestic water performance: stars **. Flow rate 13.1 litres/minute with ΔT = 25ºC. (24kW) Heating comfort Efficiency up to 108% with energy savings up to 35%. 4-star combustion efficiency in compliance with the EN92/42 standard. Modulation range from 25% to 100% of maximum power. Condensing exchanger in aluminum alloy. Reduced polluting emissions, NOx class 5. High efficiency circulator with continuous modulation to improve acoustic comfort and reduce energy consumption. Arrangement for integration into a heating system via the Ebus2 communication protocol (boilers, solar, system management modules and modulating thermoregulation accessories). Possibility of managing single-temperature and multi-temperature zones only via Expert Control. Self-diagnosis system by code. LCD display. Comfort of use and installation Possibility of connection with external probe. Compatible with Expert Control, modulating accessories and on/ff. Easier starting: automatic purge function and directly accessible combustion regulation. Energy saving and respect for the environment Up to 20% energy savings in combination with chronothermostat and external probe. 40% reduction in CO 2 emissions **. Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION POSSIBILITY OF SUPPLY TO PROPANE THROUGH A SIMPLE ADJUSTMENT. FOR INFO, CONTACT THE AUTHORIZED AREA ASSISTANCE CENTER IN ADVANCE Hermann Saunier Duval THEMA CONDENS 31 IS condensing boiler complete with low NOx fume kit for multi-family solutions Methane or propane Model: Efficiency class Heating efficiency class A Sanitary efficiency class - A Sanitary load profile - XL Heating/Sanitary Nominal power Pmin/max heating - 80/60°C kW 6.4 / 25.6 Min/Max Nominal Power (60°C) (kW) DHW 6.4 / 31.0 Continuous flow rate (ΔT = 25K) l/min 18.0 generals Supply gas - Methane Nox class - 5 Electrical protection IPX - 5D Dimensions mm (HxLxP) 740x418x344 CONVERTIBLE TO PROPRANO THROUGH SERVICE CENTER THEMA Condens IS Solution for multi-family units Ideal for structures with single flue gas outlet Smoke kit included, non-return valve already installed High sanitary comfort Hot water immediately available thanks to Aquaspeed® technology New design with flat casing and touch-screen user interface Continuous domestic hot water production up to 18 l/min ErP class A+ in combination with MiGo climatic control unit Wall-mounted combined condensing boiler for heating and domestic hot water of multi-family units with single ducting The new Thema Condens IS has a renewed aesthetic with modern and essential lines, with a flat casing and an innovative touch-screen user interface. It is the Hermann Saunier Duval solution designed to replace wall-mounted boilers (traditional or condensing) in multi-family complexes where the various boilers discharge into the same flue with a single pressurized ducting system. It is in fact equipped with a dedicated flue kit (included in the supply) for direct connection to a single flue system. The boiler has C(10)3 and C(12)3 certification which makes it possible to install it in multi-family housing structures even where there are boilers from different manufacturers. The high sanitary comfort is guaranteed by the pre-heating function with stainless steel plate sanitary exchanger and by the Aquaspeed® technology for the immediate delivery of hot water. Thema Condens IS is available in two power sizes: the new 26 kW and the 31 kW with methane fuel, but with the possibility of regulation for propane fuel. Standard smoke kit A version dedicated to multi-family systems with a single pressurized ducting system within the same flue, Thema Condens IS is equipped with a standard flue kit that facilitates installation, presenting itself as the optimal solution in case of replacement in the aforementioned structures . The supplied kit consists of an 80/125 mm adapter with an 87° bend and a rigid connection section for connection directly to the main flue outlet of the multi-family complex. The non-return valve is already installed in the boiler. The safety systems present in the kit guarantee maximum reliability of the entire system, safeguarding against the risk of undesired evacuation of exhausted fumes - also coming from other boilers in the housing unit - inside the installation room of the boiler itself, in full compliance with the Italian standard UNI 7129 part 3. Thema Condens IS stands out in its reference market boasting two additional certifications C(10)3 and C(12)3 - thanks to which it is possible to install a condensing boiler inside single pressurized flue systems manufactured by third parties which already include other boilers from different manufacturers, without in any way affecting the level of performance of the system in terms of efficiency and yields in heating and domestic hot water production. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less