Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Nominal heat input in heating max/min: Kw 23.5/5.5 Max/min nominal heat input in domestic hot water: Kw 23.5/5.5 Useful thermal power in heating: max/min: Kw 22.9/5.3 Efficiency at nominal heat input (60/80°C): 97.5% Efficiency at nominal heat input (30/50°C): 103.9% Efficiency at 30% at 30°C: 108.2% Max/min heating temperature (high temperatures): 82/35°C Max/min heating temperature (low temp.): 45/25°C Max/min DHW temperature: 60/36 °C Sanitary water production (DT=25°C): lt./min. 13.1 Specific flow rate (first 10' with DT=30°C): lt./min. 10.5 Total absorbed electric power W 87 Degrees of protection of the electrical system IP X5D Dimensions (HxWxD) mm 745 x 400 x 319 Power supply: CNG or LPG General characteristics Ariston condensing boilers 1 condensing boiler = -737kg CO2/year 1 condensing boiler = 60 more trees Together with the heat, a traditional boiler also produces water in the vapor state, usually evacuated through the exhaust fumes. Normal boilers, since they do not treat these fumes before releasing them into the environment, therefore have a thermal efficiency based exclusively on the lower calorific value. The water vapor is not recovered in any way, thus dispersing part of the energy produced during combustion. Condensation is the physical process which, inside the boiler, transforms the water again from the vapor state to the liquid one. Consistent convenience The new products, using condensing technology, eliminate waste with great energy and economic savings. Thanks to the savings in the bill, less than three years are enough to amortize the higher cost of a condensing boiler. After that, the lower consumption translates into a real gain. Imagine what a reduced bill of up to 35% every year, for many years, means for your economies... Zero waste, only benefits Today Ariston combines energy savings with tax savings, offering a great opportunity to those who have chosen to replace the old boiler with a condensing one. In fact, the Finance law provides for specific tax incentives in favor of taxpayers. HS Premium Performance ★★★★ NOx class 5 LCD display. Continuous modulation high efficiency circulator. Modulation ratio 1:4. Arrangement for integration with system configuration through the new Buss Bridgenet® communication protocol Arrangement for multi-zone and multi-temperature thermoregulation (with Sensys). Arrangement for solar system management. Aluminum alloy primary exchanger Sanitary plate heat exchanger. Self-diagnosis system by codes. Increased expansion tank lt.8. Cold water inlet and heating return filters. Protection against freezing, limescale and circulator blocking. Operation only with methane gas Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€670,00
ARISTON CONDENSING BOILER CLAS ONE L 30 kW METHANE COMPLETE WITH FUME EXHAUST KIT Wi-Fi OPTIONAL Technical features Product code: 3301024 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Nominal heat input max/min heating kW 28 / 4.3 Nominal DHW max/min heat input kW 30 / 4.3 Useful heat output max/min heating kW 27.4 / 3.9 Efficiency at nominal heat input (60/80°C) 97.9% Efficiency at nominal heat input (30/50°C) 107.3% Efficiency at 30% (30°C) 109.6% Heating max/min temperature (high temperature) °C 83/35 Heating max/min temperature (low temperature) °C 46/20 Max/min domestic hot water temperature °C 61 / 36 quantity of hot water (deltaT 25°C) 16.4 l/min Quantity of hot water (deltaT 35°C) 11.7 l/min Specific flow rate (first 10' with deltaT 30°C) 14.5 l/min Minimum operating temperature (-5°C with antifreeze kit)** °C > 0° Total absorbed electrical power 78 W Degree of protection of the electrical system IP X5D Dimensions 24 kW mm (HxWxD) 745 x 400 x 315 Power supply: METHANE Functionality: Wi-Fi optional XtraTech™ stainless steel primary exchanger AUTO, Comfort functions Indoor installation and partially protected places ONE Series, the new generation of condensing boilers New XTRATECH™ exchanger: Maximum quality. XtraTech™ is the new exclusive* Ariston stainless steel heat exchanger, the heart of the ONE condensing boilers, developed to guarantee reliability and performance over time. Increased passage sections: +142% compared to the previous exchanger. Higher prevalence, lower risk of clogging, better performance. Every day, as if it were the first. Every single component has been designed to guarantee performance and durability over time: Ariston guarantee, shown in each component. Every single component has been rigorously tested and controlled on the production line. 100% of the boilers are tested again before being shipped to our customers. The best materials have been selected, to work for a long time even in the most critical situations. Excellent results, over time Always connected with Ariston NET Wherever you are, always within reach of your Smartphone. Managing the comfort of your home has never been easier! Wherever you are, you can control the climate in your home using your smartphone. Use only the energy it needs. Easy to manage weekly time programming, directly from the app. Also, choose the savings "leaflet" for a real reduction in bill costs! Technical support always ON. Thanks to the innovative remote control system, the app warns your customer in case of malfunctions. By signing a maintenance contract, the Assistance Center will be able to intervene in the event of breakdowns, even remotely. Customer serenity is at the heart of Ariston NET. Absolute efficiency: Thermoregulation in class A+ The ONE condensing boilers achieve very high seasonal performance and thanks to the thermoregulation they reach class A+ ! Alteas and Genus ONE are also equipped with the innovative IGNITION system, which makes combustion always perfect thanks to the electronic control. Gas transformation? No problem, from the technical menu in one touch. Total Comfort: Innovative functions to meet your needs ONE is equipped with an innovative set of smart functions to guarantee comfort every day with minimum waste of energy. Auto function: Patented function that allows you to automatically optimize the operation of the boiler, eliminating continuous switching on and off, reducing the stress on the components to a minimum. Comfort function: Hot water without any waiting! Lots of water with minimum energy consumption. Integrated Programming: Weekly hourly programming integrated into Alteas and Genus ONE products. Care function: Automatic reminder of routine maintenance. NEW CLASS ONE L Clas ONE 30 L is the ideal condensing boiler for replacement, especially on large old systems. Advantages compared to the Clas ONE 30: 10-litre oversized expansion tank, 7-metre oversized high-efficiency circulator, 20-plate DHW exchanger, bypass with rigid spring. New XtraTech™ exchanger in exclusive* Ariston stainless steel, with high head Exchanger passage sections +142% compared to the previous version LCD display Class A+ in heating reachable with thermoregulation Modulation ratio 1:7 Prepared for Ariston NET connectivity BusBridgeNet® communication protocol AUTO function, Comfort Optimized internal silencer Sanitary heat exchanger increased 20 plates Expansion vessel increased real 10 l By-pass with rigid spring High efficiency circulator increased 7 m Installation in partially protected places Smoke outlet 80, 60, 50 mm Ecodesign directive: from 2015 only new condensing boilers After very long negotiations , the Ecodesign regulation was approved which introduces a new energy labeling on the minimum efficiency standards for boilers. In particular, an energy classification from A+ to G is envisaged for space heating appliances and from A to G for domestic hot water production appliances. Hence the obligation to install only condensing boilers, heat generators capable of recovering a large part of the latent heat contained in the fumes which, otherwise, would be dispersed in the chimney as occurs in traditional boilers. The recovered heat is transferred to the heating system, allowing to reach an efficiency of 106% against 92% of the traditional boiler and 84/85% of an old traditional generator. The installation obligation concerns boiler manufacturers who will no longer be able to place non-condensing ones on the market starting from 26 September 2015 . This means that starting from this date, anyone wishing to install a boiler in their own home will only have to install condensing models. Only a particular type of non-condensing boiler will continue to be produced which is technically called "open chamber" to be installed when it is not possible to replace an old boiler with a condensing boiler due to problems related to the collective flue of some multi-family buildings . What is Energy Labeling? Products for heating water and the environment represent around 30% of internal energy consumption in Europe. Designing eco-friendly products and promoting high performance technologies to end users in 2020 will lead to: An annual energy saving equivalent to 56 million tons of oil, quantifiable to the savings obtained if the water and environmental heating systems of two large nations such as Italy were deactivated. As of 26 September 2015, ErP regulation and energy labeling will be applied in Europe to water and space heating products (boilers, heat pumps, micro-CHP devices, water heaters, and water storage tanks hot. How to read energy labels There are different labels, based on the type and functions of the product (water heating or space heating only or both, and in this case the label must show both classifications). In addition to the energy class, the label provides other information that could be useful for understanding which product has the least environmental impact (for example power and consumption in different climatic zones, noise, etc.). It is possible to increase the energy efficiency of hot water production and space heating by connecting several products and accessories in one system. In this case it is necessary to prepare a system label in addition to that relating to the single product Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€1.020,00€950,00
ATTENTION THE BOILER IS BORN WITH METHANE. THEREFORE, THE STANDARD TRANSFORMATION KIT WILL BE SUPPLIED. FOR INFO, CONTACT THE AUTHORIZED AREA ASSISTANCE CENTER IN ADVANCE Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Nominal heat input in heating max/min: Kw 23.5/5.5 Max/min nominal heat input in domestic hot water: Kw 23.5/5.5 Useful thermal power in heating: max/min: Kw 22.9/5.3 Efficiency at nominal heat input (60/80°C): 97.5% Efficiency at nominal heat input (30/50°C): 103.9% Efficiency at 30% at 30°C: 108.2% Max/min heating temperature (high temperatures): 82/35°C Max/min heating temperature (low temp.): 45/25°C Max/min DHW temperature: 60/36 °C Sanitary water production (DT=25°C): lt./min. 13.1 Specific flow rate (first 10' with DT=30°C): lt./min. 10.5 Total absorbed electric power W 87 Degrees of protection of the electrical system IP X5D Dimensions (HxWxD) mm 745 x 400 x 319 Power supply: CNG or LPG General characteristics Ariston condensing boilers 1 condensing boiler = -737kg CO2/year 1 condensing boiler = 60 more trees Together with the heat, a traditional boiler also produces water in the vapor state, usually evacuated through the exhaust fumes. Normal boilers, since they do not treat these fumes before releasing them into the environment, therefore have a thermal efficiency based exclusively on the lower calorific value. The water vapor is not recovered in any way, thus dispersing part of the energy produced during combustion. Condensation is the physical process which, inside the boiler, transforms the water again from the vapor state to the liquid one. Consistent convenience The new products, using condensing technology, eliminate waste with great energy and economic savings. Thanks to the savings in the bill, less than three years are enough to amortize the higher cost of a condensing boiler. After that, the lower consumption translates into a real gain. Imagine what a reduced bill of up to 35% every year, for many years, means for your economies... Zero waste, only benefits Today Ariston combines energy savings with tax savings, offering a great opportunity to those who have chosen to replace their old boiler with a condensing one. In fact, the Finance law provides for specific tax incentives in favor of taxpayers. HS Premium Performance ★★★★ NOx class 5 LCD display. Continuous modulation high efficiency circulator. Modulation ratio 1:4. Arrangement for integration with system configuration through the new Buss Bridgenet® communication protocol Arrangement for multi-zone and multi-temperature thermoregulation (with Sensys). Arrangement for solar system management. Aluminum alloy primary exchanger Sanitary plate heat exchanger. Self-diagnosis system by codes. Increased expansion tank lt.8. Cold water inlet and heating return filters. Protection against freezing, limescale and circulator blocking. Operation only with methane gas Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€670,00
ARISTON GAS BOILER model CARES X 24 CF METHANE Low NOx OPEN CHAMBER - NEW Product code: 3301313 Energy label specifications according to the European ErP directive Class C heating energy efficiency Sanitary energy efficiency B XL withdrawal profile Technical specifications Internal, installation in branched collective pipe with natural draft Nominal heat input max/min (heating) PCI kW 25.8-11.0 Nominal heat input max/min (sanitary) PCI kW 27-11 Max/min useful heat output (heating) kW 23.2-9.8 Efficiency at nominal heat input PCI: 90.1% Efficiency at 30% of nominal flow rate PCI: 89.9% Max/min heating temperature: 82-35°C DHW max/min temperature: 60-36°C Port. specific in healthcare (10 min. with ΔT=30°C): 11.8 litres/min Quantity of hot water (ΔT=25°C): 14.2 l/min Quantity of hot water (ΔT=35°C): 10.1 l/min Minimum ambient temperature of use: 5°C Supply voltage/frequency V/Hz 230-50 Degree of protection of the electrical system IP X4D Dimensions: mm (HxWxD) 745 x 400 x 315 Power supply: methane or LPG Characteristics Digital multifunction display Continuous modulation high efficiency circulator Predisposition for on-off thermoregulation Predisposition solar systems natural circulation Self-diagnosis system by code Mono-temperature zone management Copper finned primary exchanger Double exchanger technology Integrated minimum pressure switch Cold water inlet and heating return filters Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€540,00
ARISTON HS PREMIUM 30 EU CONDENSING BOILER COMPLETE WITH METHANE FUME EXHAUST KIT - ErP Technical features Product code: 3300760 Energy label specifications according to the European ErP directive Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Nominal heat input in heating max/min: Kw 29.0/6.0 Max/min nominal heat input in domestic hot water: Kw 29.0/6.0 Useful thermal power in heating: max/min: Kw 28.4/5.8 Efficiency at nominal heat input (60/80°C): 97.8% Efficiency at nominal heat input (30/50°C): 104.0% Efficiency at 30% at 30°C: 108.0% Max/min heating temperature (high temperatures): 82/35°C Max/min heating temperature (low temp.): 45/25°C Max/min DHW temperature: 60/36 °C Sanitary water production (DT=25°C): lt./min. 16.3 Specific flow rate (first 10' with DT=30°C): lt./min. 11.6 Total absorbed electric power W 82 Degrees of protection of the electrical system IP X5D Dimensions (HxWxD) mm 745 x 400 x 319 Power supply: METHANE Ariston condensing boilers 1 condensing boiler = -737kg CO2/year 1 condensing boiler = 60 more trees Together with the heat, a traditional boiler also produces water in the vapor state, usually evacuated through the exhaust fumes. Normal boilers, since they do not treat these fumes before releasing them into the environment, therefore have a thermal efficiency based exclusively on the lower calorific value. The water vapor is not recovered in any way, thus dispersing part of the energy produced during combustion. Condensation is the physical process which, inside the boiler, transforms the water again from the vapor state to the liquid one. Consistent convenience The new products, using condensing technology, eliminate waste with great energy and economic savings. Thanks to the savings in the bill, less than three years are enough to amortize the higher cost of a condensing boiler. After that, the lower consumption translates into a real gain. Imagine what a reduced bill of up to 35% every year, for many years, means for your economies... Zero waste, only benefits Today Ariston combines energy savings with tax savings, offering a great opportunity to those who have chosen to replace the old boiler with a condensing one. In fact, the Finance law provides for specific tax incentives in favor of taxpayers. HS Premium Performance ★★★★ NOx class 5 LCD display. Continuous modulation high efficiency circulator. Modulation ratio 1:4. Arrangement for integration with system configuration through the new Buss Bridgenet® communication protocol Arrangement for multi-zone and multi-temperature thermoregulation (with Sensys). Arrangement for solar system management. Aluminum alloy primary exchanger Sanitary plate heat exchanger. Self-diagnosis system by codes. Increased expansion tank lt.8. Cold water inlet and heating return filters. Protection against freezing, limescale and circulator blocking. Operation only with methane gas Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€810,00
ATTENTION THE BOILER IS BORN WITH METHANE. THEREFORE, THE STANDARD TRANSFORMATION KIT WILL BE SUPPLIED. FOR INFO, CONTACT THE AUTHORIZED AREA ASSISTANCE CENTER IN ADVANCE Ariston CARES S 24 EU condensing boiler complete with methane or low NOx LPG fume exhaust kit 3301637 - NEW Heating energy class A Sanitary energy class A XL load profile Nominal heat input max min heating 20.0/4.7 kW Nominal max min DHW heat input 23.5/4.7 kW Heating temperature max min 82 / 35 °C Quantity of hot water deltaT=25°C 13.2 litres/min Power frequency voltage 230/50 V/Hz Electrical protection degree X5D IP NOx class 6 CARES S The condensing boiler suitable for every need, able to combine great performance and high robustness. Thanks to the stainless steel condensing exchanger, CARES S represents the right balance between comfort and performance. Reduction of energy consumption up to 35% Stainless steel condensing exchanger More robust design thanks to the new metal front panel Better accessibility thanks to the front hydrometer MADE IN ITALY produced entirely in Italy SMALL SIZE small footprint for easy installation SYSTEM MANAGEMENT new communication protocol set up to guarantee complete management of the system. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€737,00€715,00
ATTENZIONE IL PRODOTTO È NUOVO E CONTROLLATO DAI NOSTRI TECNICI, PRESENTA DIFETTI DA TRASPORTO: AMMACCATURA ALLA BASE BOZZATURE SUL PANNELLO FRONTALE IMBALLO NON ORIGINALE (PER MAGGIORI DETTAGLI VISUALIZZA LE FOTO ACCANTO ALL'IMMAGINE PRINCIPALE). CALDAIA ARISTON modello CARES X 24 CF METANO Low NOx A CAMERA APERTA Codice prodotto: 3301313 Specifiche etichetta energetica secondo direttiva Europea ErP Efficienza energetica riscaldamento Classe C Efficienza energetica sanitario B Profilo di prelievo XL Specifiche tecniche Interna, installazione in canna collettiva ramificata tiraggio naturale Portata termica nominale max/min (riscaldamento) PCI kW 25,8-11,0 Portata termica nominale max/min (sanitario) PCI kW 27-11 Potenza termica utile max/min (riscaldamento) kW 23,2-9,8 Rendimento alla portata termica nominale PCI: 90,1% Rendimento al 30% della portata nominale PCI: 89,9% Temperatura max/min riscaldamento: 82-35°C Temperatura max/min sanitario: 60-36°C Port. specif. in sanit. (10 min. con ΔT=30°C): 11,8 litri/min Quantità di acqua calda (ΔT=25°C): 14,2 l/min Quantità di acqua calda (ΔT=35°C): 10,1 l/min Temperatura ambiente minima di utilizzo: 5°C Tensione/frequenza di alimentazione V/Hz 230-50 Grado di protezione impianto elettrico IP X4D Dimensioni: mm (HxLxP) 745 x 400 x 315 Alimentazione: Metano o GPL Caratteristiche Display multifunzione digitale Circolatore ad alta efficienza a modulazione continua Predisposizione termoregolazione on-off Predisposizione sistemi solari circolazione naturale Sistema di autodiagnosi mediante codice Gestione zone mono-temperatura Scambiatore primario alettato in rame Tecnologia a doppio scambiatore Pressostato di minima integrato Filtri ingresso acqua fredda e ritorno riscaldamento Garanzia Prodotto Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.
€445,00
ATTENZIONE IL PRODOTTO È NUOVO E FUNZIONANTE, MA PRESENTA SEGNI DI RIPARAZIONE AD UN GANCIO DI PLASTICA POSTO SUL LATO INFERIORE DELLA CALDAIA E L'IMBALLO È USURATO. (PER MAGGIORI INFORMAZIONI VISUALIZZA LE FOTO ACCANTO ALL'IMMAGINE PRINCIPALE) N.B LA CALDAIA NASCE A METANO, QUINDI VERRÀ FORNITO IL KIT DI TRASFORMAZIONE DI SERIE. PER INFO CONTATTARE PREVENTIVAMENTE IL CENTRO ASSISTENZA AUTORIZZATO DI ZONA Caldaia Ariston CARES S 24 EU a condensazione completa di kit scarico fumi Metano o GPL low NOx 3301637 Classe energetica riscaldamento A Classe energetica sanitario A Profilo di carico XL Portata termica nominale max min riscaldamento 20,0/4,7 kW Portata termica nominale max min sanitario 23,5/4,7 kW Temperatura di riscaldamento max min 82 / 35 °C Quantità di acqua calda deltaT=25°C 13,2 litri/min Tensione frequenza alimentazione 230/50 V/Hz Grado di protezione elettrico X5D IP Classe NOx 6 CARES S La caldaia a condensazione adatta per ogni esigenza, in grado di coniugare grandi performance ed elevata robustezza. Grazie allo scambiatore condensante in acciaio inox, CARES S rappresenta il giusto equilibrio fra comfort e prestazioni. Abbattimento dei consumi energetici fino al 35% Scambiatore condensante in acciaio INOX Design più robusto grazie al nuovo pannello frontale metallico Migliore accessibilità grazie all’idrometro frontale MADE IN ITALY prodotto interamente in Italia DIMENSIONI RIDOTTE ingombro ridotto per una facile installazioneGESTIONE DI SISTEMA nuovo protocollo di comunicazione predisposto per garantire la completa gestione del sistema. Garanzia Prodotto Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.
€685,00
Open Chamber Boiler Ariston HS X 24 CF Low NOx Methane - NEW Energy efficiency class in heating C Energy class in Sanitary B XL load profile Nominal heat input max/min kw 25.8 / 11.0 Useful thermal power max/min kw 23.2 / 9.8 Nominal heat input max/min (sanitary) PCI 27/11.0 kW Hot water flow rate at ΔT 25º C 14.2 l/min Low NOx emissions < 56 mg/kWh Supply voltage 230 V~ (50 Hz) Electrical protection degree IP X4D Dimensions HxWxD 745x400x315 mm New HS X The new Ariston HS-X boiler leaves behind the traditional room thermostat and can work with internal and external temperature probes. Prepared for thermoregulation. These exclusive Ariston thermoregulation peripherals allow for a further 15% gas saving, offering greater stability at room temperature. Ready for use with solar thermal energy in domestic hot water. Digital multifunction display Continuous modulation high efficiency circulator Predisposition for on-off thermoregulation Predisposition solar systems natural circulation Self-diagnosis system by code Mono-temperature zone management Copper finned primary exchanger Double exchanger technology Integrated minimum pressure switch Cold water inlet and heating return filters Low NOx emissions < 56 mg/kWh Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€520,00
ARISTON GAS BOILER model CLAS X 28 CF METHANE Low NOx OPEN CHAMBER Technical features. Product code: 3301314 Energy label specifications according to the European ErP directive Class C heating energy efficiency Sanitary energy efficiency B XL withdrawal profile Technical specifications Rated heat input max/min (heating) PCI: 29.5-13kW Nominal heat input max/min (sanitary) PCI: 29.5-13 kW Max/min useful heat output (heating): 26.6-11.6kW Efficiency at nominal heat input PCI: 90.2% Efficiency at 30% of nominal flow rate PCI: 90.3% Max/min heating temperature: 82-35°C DHW max/min temperature: 60-36°C Port. specific in healthcare (10 min. with ΔT=30°C): 13.2 litres/min Quantity of hot water (ΔT=25°C): 15.8 l/min Quantity of hot water (ΔT=35°C): 11.3 l/min Minimum ambient temperature of use: 5°C Supply voltage/frequency V/Hz 230-50 Total absorbed electric power: 52,1W Degree of protection of the electrical system IP X4D Dimensions mm (HxWxD) 745 x 400 x 315 Power supply: methane or LPG Functionality AUTO, Comfort functions Internal, installation in branched collective pipe with natural draft Characteristics LCD display Continuous modulation high efficiency circulator Prepared for Ariston Net connectivity Bus Bridgenet® communication protocol Arrangement for multi-zone and multi-temperature thermoregulation Arrangement for solar system management Car function and comfort Copper finned primary exchanger Cold water inlet and heating return filters Low NOx emissions < 56 mg/kWh Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€810,00
ATTENZIONE IL PRODOTTO È NUOVO E FUNZIONANTE, MA PRESENTA UNA LIEVE AMMACCATURA SULLA PARTE POSTERIORE E LATERALE E L'IMBALLO È USURATO. (PER MAGGIORI INFORMAZIONI VISUALIZZA LE FOTO ACCANTO ALL'IMMAGINE PRINCIPALE) CALDAIA ARISTON modello CARES X 24 CF METANO Low NOx A CAMERA APERTA - NEW Codice prodotto: 3301313 Specifiche etichetta energetica secondo direttiva Europea ErP Efficienza energetica riscaldamento Classe C Efficienza energetica sanitario B Profilo di prelievo XL Specifiche tecniche Interna, installazione in canna collettiva ramificata tiraggio naturale Portata termica nominale max/min (riscaldamento) PCI kW 25,8-11,0 Portata termica nominale max/min (sanitario) PCI kW 27-11 Potenza termica utile max/min (riscaldamento) kW 23,2-9,8 Rendimento alla portata termica nominale PCI: 90,1% Rendimento al 30% della portata nominale PCI: 89,9% Temperatura max/min riscaldamento: 82-35°C Temperatura max/min sanitario: 60-36°C Port. specif. in sanit. (10 min. con ΔT=30°C): 11,8 litri/min Quantità di acqua calda (ΔT=25°C): 14,2 l/min Quantità di acqua calda (ΔT=35°C): 10,1 l/min Temperatura ambiente minima di utilizzo: 5°C Tensione/frequenza di alimentazione V/Hz 230-50 Grado di protezione impianto elettrico IP X4D Dimensioni: mm (HxLxP) 745 x 400 x 315 Alimentazione: Metano o GPL Caratteristiche Display multifunzione digitale Circolatore ad alta efficienza a modulazione continua Predisposizione termoregolazione on-off Predisposizione sistemi solari circolazione naturale Sistema di autodiagnosi mediante codice Gestione zone mono-temperatura Scambiatore primario alettato in rame Tecnologia a doppio scambiatore Pressostato di minima integrato Filtri ingresso acqua fredda e ritorno riscaldamento Garanzia Prodotto Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.
€470,00
Ariston Condensing boiler for outdoor use GENUS ONE NET EXT 25 Methane complete with flue gas exhaust kit Product code: 3301225 Energy label specifications according to the European ErP directive Class A heating energy efficiency (A+ achieved thanks to thermoregulation) Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Max/min nominal heat input (heating) PCI: 22-2.5 kW Nominal heat input max/min (sanitary) PCI: 26-2.5 kW Max/min useful heat output (heating): 21.5-2.3 kW Efficiency at nominal heat input (60/80°C) PCI: 97.7% Efficiency at nominal heat input (30/50°C) PCI: 106.7% Efficiency at 30% (30°C) PCI: 109.7% Max/min heating temperature (high temperature): 82-35°C Max/min heating temperature (low temperature): 45-20°C DHW max/min temperature: 60-36°C Quantity of hot water (deltaT 25°C): 15.4 l/min Quantity of hot water (deltaT 35°C): 11 l/min Specific flow rate (first 10' with deltaT 30°C): 12.8 l/min minimum operating temperature (-20°C with antifreeze kit) -15°C Power supply voltage/frequency V/Hz 230-50 Total absorbed electric power: 84,7W Degree of protection of the electrical system IP X5D Dimensions mm (HxWxD) 770 x 505 x 240 External installation Power supply: methane Functionality: XtraTech™ stainless steel Standard connectivity: with the Sensys NET thermostat Thermoregulation included: Sensys NET system manager + external probe Functions: AUTO, Comfort, CARE Operation CNG, LPG and propane air without the need for kits. The transformation takes place thanks to the combustion control by selecting the type of gas from the technical menu GENUS ONE NET EXT XtraTech™ heat exchanger in exclusive Ariston stainless steel, with high head Exchanger passage sections +142% compared to the previous version Ignition system, electronic combustion control Gas transformation from the technical menu Modulation ratio 1:10 Ariston Net connectivity included with Sensys Net BusBridgeNet® communication protocol AUTO and Comfort function Class A+ in heating thanks to the Sensys NET system manager and standard external probe Minimum operating temperature down to -20°C* Semi automatic filling Electro-galvanized coat for outdoors Smoke outlet 80, 60, 50 mm Comfort function It speeds up hot water dispensing in two modes: Comfort Plus Mode (always hot water in just 5") and Comfort Mode (hot water for 30' after the last tap). Auto function Maximum comfort, efficiency and energy savings based on automatic analysis of the environmental conditions, connected external devices and required performance. System management New communication protocol designed to ensure complete system management. High efficiency Product characterized by high energy performance, reduction of consumption and polluting emissions. Extra small size Extremely small footprint to adapt to any space problem. Made in Italy Made entirely in Italy. Modulating circulation Modulating circulator for optimizing consumption and maximizing performance. Outdoor installation Possibility of outdoor installation thanks to all the weather protection devices. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€1.270,00
You have seen 12 out of 117 products
