Technical features Indoor unit catalog code : MTB-140 Outdoor unit catalog number : MOU-140K Power : 48000 Btu Energy efficiency Energy Efficiency Class in Cooling : A Heating Energy Efficiency Class: A Performance Cooling Capacity: 14.0 kW Heating Capacity: 16.4 kW Treated Air Indoor Unit : 1940~3010 m 3 /h Sound Power Level Indoor Unit : 37~46 dB(A) External Unit Sound Power Level: 69 dB(A) Electrical data Power supply (V,Hz, Ø) : 230/50/1 Refrigerant gas : R.-410 Operating range - Cooling: -15° ~ 50°C - Heating: -15° ~ 30° C Installation data Pipe diameter Liquid : 9.52 mm (3/8") Gas pipe diameter: 15.88 mm (5/8") Maximum piping length: 65 m Maximum difference in height indoor unit / outdoor unit: 30 m Dimensions and weight Internal Unit Dimensions (LxWxH): 1200x865x300 mm Indoor Unit Weight: 45 Kg External Unit Dimensions (LxWxH): 938x392x1369 mm Weight of Outdoor Unit: 102 Kg Channeled Midea Flexible Air Return Rear air inlet is standard and bottom air inlet is optional. The dimension of the bottom plate and from the back flange are the same, so it is easy for the installer to change the air inlet from the back to the bottom “Fresh Air” intake The "Aria Fresca" intake is standard, it is easy to connect it to the external air passage hole “Twin” combination The internal cassette units can be installed in "Twin" mode: a single external unit can connect with two internal units, expanding the scenario of possible installations. Available in combinations: 18k+18k, 24k+24k, 30k+30k Integrated Drain Pump The drain pump is able to lift the condensed water up to 750mm Features and Functions Automatic restart All Midea products are equipped with a special memory: in the event of a power cut (blackout), once the power returns, the devices set themselves to the last settings Sleep The "Sleep" function allows the air conditioner to gradually increase (in cooling) and decrease (in heating) the temperature, to then switch off after 5 hours. Ideal for the night Timer A daily timer inserted in the remote control allows Midea air conditioners to turn on and off automatically with an accuracy of 30min/1h over 24 hours 5 External Ventilation Speeds Thanks to the Inverter technology, the speed steps of the external ventilation motor go from 2 to 5. A more precise control of the ventilation speed brings enormous advantages in terms of energy absorption Technical rooms air conditioning A special technology allows all Midea Splits to be able to operate in "cooling" mode even with external temperatures down to -15°. Ideal for designing Server Rooms and/or technical rooms Follow Me Midea remote controls are equipped with a temperature sensor, which the unit considers as "ambient temperature". The air conditioner therefore works by "following" the real temperature perceived by the user Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Midea Column Air Conditioner LCAC Inverter 48000 Btu MFG-48FNXD0 R-32 Wi-Fi Optional - New Internal Unit Code MFG-48FNXD0 EAN 8052705160178 Code Outdoor Unit MOU-48FN8-RD0 EAN 8033638103401 Power supply Internal Unit PV-Hz 1F 220-240V 50Hz Power supply External Unit PV-Hz 3F 380-415V 50Hz Efficiency Cooling Capacity kW (Min-Nom-Max) 4.95-14.07-15.46 Absorbed Electric Power W (Min-Nom-Max) 1158-4950-5909 Energy class A++ Current A (Nom) 7.0 Heating Capacity kW (Min-Nom-Max) 3.49-16.12-18.49 Absorbed Electric Power W (Min-Nom-Max) 1022-5200-6200 Current A (Nom) 7.4– Energy efficiency EER/COP W/W 2.84/3.10 Indoor unit Dimensions (LPA) mm 629-456-1935 Net weight 58.4 kg Packing dimensions (LPA) mm 2055-750-575 Gross weight 77.1 kg Air Flow (Min-Med-Max) m3/h 2027-2222-2431 Sound Pressure (Min-Med-Max) dB(A) 52-53-55 Sound Power (Max) dB(A) 66 Outdoor Unit Dimensions (LPA) mm 952-415-1333 Net weight Kg 106,7 Packing dimensions (LPA) mm 1095-495-1480 Gross weight 119.9 kg Air flow m3/h 7500 Type ROTARY compressor Sound pressure (Max) dB(A) 66 Sound power dB(A) 72 Dimensions and Limitations Refrigerant Circuit Piping Liquid Side mm 9.52 Gas side pipe mm 15.88 Length of Pipes Covered by Precharge m 5 Minimum recommended piping length m 3 Equivalent piping length (Max) m 65 Increase of Refrigerant g/m 24 Height difference (Max) m 30 Refrigerant Fluid Refrigerant type R32 GWP675 Quantity Preloaded Kg 2,80 Equivalent CO2 emissions Ton. 1,890 Proof pressure (High/Low side) MPa 4.3/1.7 Electrical Connections Power supply connection UI n° conductors 2P+Earth UE power supply connection n° conductors 4P+Earth Indoor-Outdoor Unit connection n° of conductors 2P (shielded) Maximum Absorbed Electric Power W 6200 Maximum current A 8.8 Operating Limits Internal Temperatures Cool.(Min-Max) °C WB +17 – +32 Heating (Min-Max) °C DB 0 – +30 Outside Temperatures Cool.(Min-Max) °C DB -15 – +50 Heating (Min-Max) °C WB -15 – +24 LCAC column Column indoor units are the best solution for large rooms, where intense and direct air conditioning is required. The product can be adjusted using the control panel on the unit. Cooling and heating Energy class A++ Cooling kW: 14.0 Heating kW: 16.1 Smart dehumidifying Self-diagnosis High air throw Display with control panel and IR receivers Self-diagnosis In the event of a breakdown , a fault code system allows users to report defects in a simple and clear way in order to quickly activate the assistance service. Display with control panel and IR receiver The indoor unit is equipped with an alphanumeric display with integrated IR receiver and keyboard for product control. High air throw The air flow of the internal unit allows you to treat very large surfaces thanks to the air throw that can reach up to 15 m. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Midea Air Conditioner Ceiling / Floor R32 48000 btu MUE-48FNXD0 - NEW Model: Indoor unit code: MUE-48FNXD0 Outdoor unit code: MOU-48FN8-QD0 Power; 48000 btu/h Performance: Cooling capacity kW min-nom-max 4.26-14.20-15.11 Heating capacity kW min-nom-max 3.81-16.10-18.07 Cooling Absorbed Electric Power W (Min-Nom-Max) 1158-5500-5703 Absorbed electric power heating W (Min-Nom-Max) 1026-5050-6200 Characteristics: Power supply (V/Hz/Φ) : Three-phase 380-415V 50Hz Refrigerant Piping Liquid / Gas Line: mm(inch) 9.50 / 15.88 Dimensions and weight: Indoor Unit (LxWxH): 1650-675-235 mm ; 47.6 Kgs External Unit (LxWxH): 1095-495-1480 mm; 119 kgs Infrared control included Midea Commercial R-32 The Midea group was among the first companies to introduce the use of low GWP (Global Warming Potential) index refrigerants in its products to counter the effects of atmospheric overheating and the dreaded «Greenhouse Effect» This change takes place years before the regulations impose the abolition of traditional refrigerants, testifying to the attention that Midea places on environmental sustainability. Low GWP index Thanks to the reduced value of the GWP index (675), the R32 refrigerant is characterized by CO2 equivalent emissions significantly lower than those of other HFC refrigerants. Energy saving Comparative tests show that, under equal conditions, the new R32 refrigerant guarantees a specific efficiency 2% higher than R410A Simplicity of installation The range of new Midea indoor units can be connected, in addition to the R32 outdoor units, also to the R410A etsrene units of the previous series, to the full advantage of management simplicity Floor/Ceiling R-32 Easy Cleaning Panel To simplify cleaning operations, all the different parts of the units are easily accessible and/or removable. Turbo function A specific function allows the unit to reach the desired/set temperature in the shortest possible time. Air intake The air inlet is standard on the products: it can be connected to an inlet fan to introduce air into the unit's return duct Wide Range of Air Diffusion The distribution of the air flow is multidirectional, in order to distribute the cold and the heat in the most uniform way, thus guaranteeing maximum comfort. Wired Command Arrangement The control of the units can be carried out, as well as by remote control, also by means of the special wall command (purchasable as an optional) Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Midea Inverter Air Conditioner Ceiling / Floor 48000 btu MUE-48HRFNX R-32 A++ complete with THREE-PHASE control - NEW Model: Indoor unit code: MUE-48HRFNX Outdoor unit code: MOE30U-48HFN8-R(GA) - T Power; 48000 btu/h Energy efficiency: Cooling efficiency SEER: 6.10 SCOP coefficient of performance (Medium Season): 3.80 Energy Efficiency Class (cooling): A++ Energy Efficiency Class (heating): A Performance: Power Output in cooling: 14.07 (3.52 - 15.24) kw Power Output in heating: 16.12 (4.10 - 17.00) kW Power consumption in cooling/heating: 5.00 (0.90 - 5.95) / 5.10 (1.00 - 6.05) Indoor unit sound pressure (Min/Med/Max) (db(A)): 53 / 50 / 45 / 36 Internal unit sound power max db(A); 67 Outdoor unit sound power dbA: 74 Characteristics: Power supply (V/Φ/Hz) : 380-415 / 3 / 50 Refrigerant Piping Liquid / Gas Line: mm(inch) 9.52 / 15.9 Dimensions and weight: Indoor Unit (LxWxH): 1650 x 675 x 235 mm Outdoor Unit (LxWxH): 952 x 415 x 1333 mm Infrared control included Midea Commercial R-32 Convertible installation The products can be installed suspended from the ceiling or wall thanks to the particular shape of the condensate drain pan Self-diagnosis In the event of a failure, a fault code system allows users to report defects in a simple and clear way to quickly activate the assistance service Contact Alarm The indoor units are equipped with a logic output which allows the product failure condition to be exported for connection to remote malfunction indication systems. Motorized horizontal and vertical deflectors The units are equipped with a motorized deflector to control the air flow on the vertical and horizontal axis. Display with IR receiver The indoor unit is equipped with an alphanumeric display with integrated IR receiver Fresh air intake The unit has vents in its frame to supply fresh air or fresh air. There are terminals on the indoor units for direct control of an supply fan. Follow me function The room temperature can be detected by a special sensor located in the local control, in order to obtain a more precise reading ON-OFF input The internal units are equipped with a logic input which allows the product to be switched on and off from an external device. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

MIDEA Ducted Air Conditioner Inverter R32 48000 BTU MTI-48FNXD0 A++ three-phase - NEW Model: Indoor unit code: MTI-48FNXD0 Outdoor unit code: MOU-48FN8-QD0 Power; 48000 btu/h Performance: Power Output in cooling: 14.0 kW Power Output in heating: 16.02 kW Power absorbed in cooling: 5150 W Power absorbed in heating: 4260 W Indoor unit sound pressure (Min/Med/Max) (db(A)): 48-50-51 Internal unit sound power max db(A); 69 Characteristics: Three-phase power supply 380-415V 50Hz Refrigerant Pipes Liquid / Gas Line: mm 9.52 / 15.88 Dimensions and weight: Indoor Unit (LxWxH): 1200-874-300 mm ; 47.6 Kgs Outdoor Unit (LxWxH): 952-410-1333 mm; 106.7 Kgs Midea Commercial R-32 The Midea group was among the first companies to introduce the use of low GWP (Global Warming Potential) index refrigerants in its products to counter the effects of atmospheric overheating and the dreaded «Greenhouse Effect» This change takes place years before the regulations impose the abolition of traditional refrigerants, testifying to the attention that Midea places on environmental sustainability. Low GWP index Thanks to the reduced value of the GWP index (675), the R32 refrigerant is characterized by CO2 equivalent emissions significantly lower than those of other HFC refrigerants. Energy saving Comparative tests show that, under equal conditions, the new R32 refrigerant guarantees a specific efficiency 2% higher than R410A Simplicity of installation The range of new Midea indoor units can be connected, in addition to the R32 outdoor units, also to the R410A etsrene units of the previous series, to the full advantage of management simplicity Ducted R-32 Midea Air Recovery Reversible The air intake duct can be moved from the rear of the product (standard configuration) to the lower part of the same, replacing it with a sheet metal panel. In this way it is possible to make the product suitable for any installation condition. Ducted Units A6 The new range of A6 ductable units is characterized by more compact dimensions than the previous versions (height starting from 210 mm) and by a greater pressure available for the fans, to the full advantage of installation simplicity. The products are also equipped with an innovative function for automatically setting the rotation speed of the fan which allows the system to automatically adapt its work according to the ducts connected to the unit. G2 filters supplied To facilitate installation, Midea ducted units are supplied as standard with a G2 flat filter and filter holder frame. Condensate Lifting Pump The Midea 4-way Cassette indoor units are equipped with a pump for lifting the condensate liquid which allows it to be discharged at a height of 600 mm above the tray. Air intake The air inlet is standard on the products: it can be connected to an inlet fan to introduce air into the return duct Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less